in_array
I wrote a simple, yet powerful function for finding a key in an array relative to another key. This is very useful for finding the next key in an associative array if you know the current key, or any other arbitrary key relative to the current key.
This function does not use a foreach loop. I have not tested it for speed compared to a foreach loop. I would assume it's faster since it uses PHP's built in functions, but I could be wrong. I'd appreciate feedback on this.
- Jamon Holmgren
<?php
// array_key_relative - Returns a key in an associative array relative to another key without using foreach. Very useful for finding previous key or finding next key in array, etc
// - Written by Jamon Holmgren (www.jamonholmgren.com). Last revised 8/18/2009. Free for any use.
// function array_key_relative(array $array, string $current_key, int $offset)
function array_key_relative($array, $current_key, $offset = 1) {
// create key map
$keys = array_keys($array);
// find current key
$current_key_index = array_search($current_key, $keys);
// return desired offset, if in array, or false if not
if(isset($keys[$current_key_index + $offset])) {
return $keys[$current_key_index + $offset];
}
return false;
}
?>
Usage example:
<?php
$test_array = array(
"apple" => "Red, shiny fruit",
"orange" => "Orange, dull, juicy fruit",
"pear" => "Usually green and odd-shaped fruit",
"banana" => "Long yellow fruit that monkeys like to eat",
"cantelope" => "Larger than a grapefruit",
"grapefruit" => "Kind of sour"
);
echo array_key_relative($test_array, "apple", 2); // outputs "pear"
echo array_key_relative($test_array, "orange", -1); // outputs "apple" */
$next_key = array_key_relative($test_array, "banana", 1); // Get the key after banana (cantelope)
echo $test_array[$next_key]; // outputs "Larger than a grapefruit"
?>
key
(PHP 4, PHP 5)
key — Pobiera klucz z tablicy asocjacyjnej
Opis
key() zwraza klucz bieżącego elementu z tablicy asocjacyjnej.
Przykład #1 Przykład użycia funkcji key()
<?php
$tablica = array(
'owoc1' => 'jabłko',
'owoc2' => 'pomarańcza',
'owoc3' => 'winogrono',
'owoc4' => 'jabłko',
'owoc5' => 'jabłko');
// poniższa pętla wyświetla wszystkie klucze w tablicy asocjacyjnej, gdzie
// wartość jest równa "jabłko"
while ($nazwa_owocu = current($tablica)) {
if ($nazwa_owocu == 'jabłko') {
echo key($tablica).'<br />';
}
next($tablica);
}
?>
add a note
User Contributed Noteskey
jamon at clearsightdesign dot com
19-Aug-2009 05:24
19-Aug-2009 05:24
michael
09-Dec-2008 07:19
09-Dec-2008 07:19
Here is an improved version of the KeyName function below. It is simpler and faster, especially on large arrays as it runs in O(1) instead of O(n).
<?php
function KeyName(array $a, $pos) {
$temp = array_slice($a, $pos, 1, true);
return key($temp);
}
?>
Also, KeyName($a, -1) will return the last key, etc.
egingell at sisna dot com
02-Dec-2007 11:12
02-Dec-2007 11:12
What's the point of lines 14 and 25? $array is destroyed when the function returns. If you want this to work as written, change line 2 to this: (pass $array by reference instead of by value)
<?
function add_key ($value, &$array) // returns the key of the value added or existing already within the array
?>
> danny at dannymendel dot com
> 12-Apr-2006 09:41
> An auto incremental key value function, returning the key value:
>
> 1 <?
> 2 function add_key ($value, $array) // returns the key of the value added or existing already within the array
> 3 {
> 4 if (is_array ($array))
> 5 {
> 6 if (!in_array ($value, $array))
> 7 {
> 8 ksort ($array);
> 9
>10 end ($array);
>11
>12 $key = key ($array) + 1;
>13
>14 $array[$key] = $value;
>15 }
>16 else
>17 {
>18 $key = array_search ($value, $array);
>19 }
>20 }
>21 else
>22 {
>23 $key = 1;
>24
>25 $array[$key] = $value;
>26 }
>27 return $key;
>28 }
>29 ?>
yarco dot w at gmail dot com
13-Sep-2007 08:45
13-Sep-2007 08:45
Re: br_joris[at]hotmail[doth]com
Do you really mean you want 2 keys point to 1 value?
What you've written seems you want 1 key point to 2 values.
But if you really want 2 keys point to 1 value, you could do the following:
<?php
$buf['key1'] = 'abc';
$buf['key2'] = & $buf['key1'];
?>
danny at dannymendel dot com
12-Apr-2006 03:41
12-Apr-2006 03:41
An auto incremental key value function, returning the key value:
<?
function add_key ($value, $array) // returns the key of the value added or existing already within the array
{
if (is_array ($array))
{
if (!in_array ($value, $array))
{
ksort ($array);
end ($array);
$key = key ($array) + 1;
$array[$key] = $value;
}
else
{
$key = array_search ($value, $array);
}
}
else
{
$key = 1;
$array[$key] = $value;
}
return $key;
}
?>
php_notes at ionws dot com
10-Oct-2005 11:17
10-Oct-2005 11:17
Note that key($array) returns NULL if $array's internal pointer goes past the end of the array. For example, the following code:
<?php
$arr = array(
'one' => '1',
'two' => '2',
'three' => '3',
'four' => '4',
'five' => '5');
for ($i = 0; $i < 10; $i++) {
var_dump(key($arr));
next($arr);
}
?>
results in:
string(3) "one"
string(3) "two"
string(5) "three"
string(4) "four"
string(4) "five"
NULL
NULL
NULL
NULL
NULL
Danniel@t h e - police (d'0't) com
22-May-2005 08:55
22-May-2005 08:55
To get the key name by position from Array:
<?php
$myArray['name1']=3;
$myArray['name2']=2;
$myArray['name3']=1;
echo($myArray[1]); /* return NULL */
/* isset($myArray[1]) return false; */
/* is_null($myArray[1]) return true; */
function KeyName($myArray,$pos) {
// $pos--;
/* uncomment the above line if you */
/* prefer position to start from 1 */
if ( ($pos < 0) || ( $pos >= count($myArray) ) )
return "NULL"; // set this any way you like
reset($myArray);
for($i = 0;$i < $pos; $i++) next($myArray);
return key($myArray);
}
echo KeyName($myArray,1); // result: name2
echo KeyName($myArray,2); // result: name3
echo KeyName($myArray,3); // result: "NULL"
?>
You can get any existing "key name" from array that is located at position $pos gived as second parameter. If no element is defined at given position the function will return the string "NULL".
Danniel@t h e - police (d'0't) com
22-May-2005 08:55
22-May-2005 08:55
To get the key name by position from Array:
<?php
$myArray['name1']=3;
$myArray['name2']=2;
$myArray['name3']=1;
echo($myArray[1]); /* return NULL */
/* isset($myArray[1]) return false; */
/* is_null($myArray[1]) return true; */
function KeyName($myArray,$pos) {
// $pos--;
/* uncomment the above line if you */
/* prefer position to start from 1 */
if ( ($pos < 0) || ( $pos >= count($myArray) ) )
return "NULL"; // set this any way you like
reset($myArray);
for($i = 0;$i < $pos; $i++) next($myArray);
return key($myArray);
}
echo KeyName($myArray,1); // result: name2
echo KeyName($myArray,2); // result: name3
echo KeyName($myArray,3); // result: "NULL"
?>
You can get any existing "key name" from array that is located at position $pos gived as second parameter. If no element is defined at given position the function will return the string "NULL".
happy dot machine at skynet dot be
06-May-2003 06:20
06-May-2003 06:20
<?php
$tab = array();
$tab[0] = 'php';
$tab[1] = '.';
$tab[2] = 'net';
// you will not enter the while
// $key = 0, while will consider $key as false
reset($tab);
while ($key = key($tab) ) {
echo $tab[$key];
next($tab);
}
// this will
reset($tab);
while (!is_null($key = key($tab) ) ) {
echo $tab[$key];
next($tab);
}
// when key() can't return a 'key', it return NULL
echo var_dump($key);
?>
kajetan at kajetan dot nu
04-Jul-2002 08:20
04-Jul-2002 08:20
I'm writing a forum and use an array to hold all the smiles. The keys in the array are the characters to write to get a smiley, and the data is the filename, like this
$Smiles[':-)'] = 'smile.gif'
To output all the smileys in a table with 3 columns, I wrote this code:
<?php
$the_end = false;
$s = reset($Smiles);
$k = key($Smiles);
while(!$the_end){
echo '<tr>';
for($i=0; $i<3; $i++){
echo '<td>';
if($the_end) echo ' ';
else{
echo $k.'< br><img src="'. $s .'">';
$s = next($Smiles);
if ($s==false) $the_end=true;
else
$k = key($Smiles);
}
echo "</td>\n";
}
echo "</tr>\n";
}
?>
I had to write a space in the < br> tag in the code above, because the board did a line brake otherwise.
mkeller at gmx dot de
11-Oct-2001 07:46
11-Oct-2001 07:46
In the case key() does not give you back the key(myarray) but "0", try this:
(Try this example without the line containing "end($myarray)" and you see my reason for this post...)
<?php
for($i = 0; $i <= 10; $i++) {
$myarray[] = 'content '.$i;
end($myarray);
echo ('<br>key()='.key($myarray).' , content='.$myarray[$i]);
}
?>
php at snr-graphics dot com
23-Mar-2001 07:50
23-Mar-2001 07:50
A Method of Multi-Dimensionalizing an Associative Array (This idea was designed with Graphics (image filenames in mind):
(A quick overview):
While working on a rather large web application, I found that I needed a way to obtain "all" the details on images used by the application, these images (by filename) were stored in the configuration file, in the form of associative arrays.
The following represents an example of how I tool those and converted them into multi-dimensional associative arrays.
<?php
do {
$size = getImageSize($path.$myarray[key($myarray)]);
if ($size[2] == '1') { $size[2] = 'gif'; }
else if ($size[2] == '2') { $size[2] = 'jpg'; }
else if ($size[2] == '3') { $size[2] = 'png'; }
else if ($size[2] == '4') { $size[2] = 'swf'; }
else { $size[2] = 'UNKNOWN'; }
$myarray[key($myarray)] = Array($myarray[Key($myarray)],$size[0],$size[1],$size[2],$size[3]);
} while (next($myarray));
?>
The end result is an multi-dim. associative array which contains the values:
<?php
$myarray["this"][0] = # filename.gif
$myarray["this"][1] = # width
$myarray["this"][2] = # height
$myarray["this"][3] = # type (converted to the file extension.)
$myarray["this"][4] = # height=x width=x
?>
This may not be all that impressive to some, but it turned out to be very useful for me, so I thought I'd share, in addition, I think it gives a "very" good example of "a use" for the Key() function.
Frankly, I was quite happy to discover this function, I can't count the number of times I "needed to use the key as a value".
I hope you find this code useful.