PHP 7.1.0 Release Candidate 3 Released

# mkdir

(PHP 4, PHP 5, PHP 7)

mkdirMakes directory

### Description

bool mkdir ( string $pathname [, int$mode = 0777 [, bool $recursive = false [, resource$context ]]] )

Attempts to create the directory specified by pathname.

### Parameters

pathname

The directory path.

mode

The mode is 0777 by default, which means the widest possible access. For more information on modes, read the details on the chmod() page.

Note:

mode is ignored on Windows.

Note that you probably want to specify the mode as an octal number, which means it should have a leading zero. The mode is also modified by the current umask, which you can change using umask().

recursive

Allows the creation of nested directories specified in the pathname.

context

Note: Context support was added with PHP 5.0.0. For a description of contexts, refer to Streams.

### Return Values

Returns TRUE on success or FALSE on failure.

### Examples

Example #1 mkdir() example

<?php
mkdir
("/path/to/my/dir"0700);
?>

Example #2 mkdir() using the recursive parameter

<?php
// Desired folder structure
$structure './depth1/depth2/depth3/'; // To create the nested structure, the$recursive parameter
// to mkdir() must be specified.

if (!mkdir($structure0777true)) { die( 'Failed to create folders...'); } // ... ?> ### Errors/Exceptions Emits an E_WARNING level error if the directory already exists. Emits an E_WARNING level error if the relevant permissions prevent creating the directory. ### Notes Note: When safe mode is enabled, PHP checks whether the directory in which the script is operating has the same UID (owner) as the script that is being executed. ### See Also • is_dir() - Tells whether the filename is a directory • rmdir() - Removes directory add a note ### User Contributed Notes 35 notes 24 jack dot sleight at gmail dot com 6 years ago When using the recursive parameter bear in mind that if you're using chmod() after mkdir() to set the mode without it being modified by the value of uchar() you need to call chmod() on all created directories. ie: <?php mkdir ('/test1/test2', 0777, true); chmod('/test1/test2', 0777); ?> May result in "/test1/test2" having a mode of 0777 but "/test1" still having a mode of 0755 from the mkdir() call. You'd need to do: <?php mkdir ('/test1/test2', 0777, true); chmod('/test1', 0777); chmod('/test1/test2', 0777); ?> 12 aulbach at unter dot franken dot de 17 years ago This is an annotation from Stig Bakken: The mode on your directory is affected by your current umask. It will end up having (<mkdir-mode> and (not <umask>)). If you want to create one that is publicly readable, do something like this: <?php$oldumask
mkdir('mydir', 0777); // or even 01777 so you get the sticky bit set
umask($oldumask); ?> satis at clankiller dot com 6 years ago Please note that in a shared environment I failed to take into account an existing umask when I did a mkdir(dirname, 0755). This ended up creating the directory (function returned true), but I didn't have rights to do anything inside the folder, nor could I even view that it existed via ftp. However, file_exists(dirname) returned true. Eventually I figured out what happened and was able to rmdir(dirname), then created the directory correctly. So, when writing scripts you expect to be portable, either use umask to set your umask accordingly, or do a straight mkdir(dirname) followed by chmod(dirname, 0755) (or whatever it is you're looking for). If you make the same mistake I did, you should be able to rmdir() or chmod() the folder so it's accessible. Anonymous 10 years ago function mkdirs($dir, $mode = 0777,$recursive = true) {
if( is_null($dir) ||$dir === "" ){
return FALSE;
}
if( is_dir($dir) ||$dir === "/" ){
return TRUE;
}
if( mkdirs(dirname($dir),$mode, $recursive) ){ return mkdir($dir, $mode); } return FALSE; } toppi at kacke dot de 5 years ago If you have problems with the SAFE MODE Restriction in effect i.e. if you try to create and access to subdirectorys recursive you can use ftp-lib like this. <?php DEFINE ('FTP_USER','yourUser'); DEFINE ('FTP_PASS','yourPassword'); /** * Returns the created directory or false. * * @param Directory to create (String) * @return Created directory or false; */ function mkDirFix ($path) {

$path = explode("/",$path);

$conn_id = @ftp_connect("localhost"); if(!$conn_id) {
return
false;
}
if (@
ftp_login($conn_id, FTP_USER, FTP_PASS)) { foreach ($path as $dir) { if(!$dir) {
continue;
}

$currPath.="/".trim($dir);
if(!@
ftp_chdir($conn_id,$currPath)) {
if(!@
ftp_mkdir($conn_id,$currPath)) {
@
ftp_close($conn_id); return false; } @ ftp_chmod($conn_id,0777,$currPath); } } } @ ftp_close($conn_id);
return
$currPath; } ?> Maybe it helps. Toppi kungla at gmail dot com 10 years ago Somehow the recursive version of mkdir didn't work for me on Mac and the workaraounds listed below alsow didn't work for me, so heres my solution: <?php function mkdir_r($dirName, $rights=0777){$dirs = explode('/', $dirName);$dir='';
foreach (
$dirs as$part) {

$dir.=$part.'/';
if (!
is_dir($dir) && strlen($dir)>0)

mkdir($dir,$rights);
}
}
?>

Tested and works ;)
ethaizone at hotmail dot com
7 years ago
When I created folder on windows with mkdir, I found some problem from folder nam so I write this function.

<?php
function filename_safe($name) {$except = array('\\', '/', ':', '*', '?', '"', '<', '>', '|');
return
str_replace($except, '',$name);
}
?>

It can use with another functions about file system as file_put_contents to clean up file name.
Anonymous
2 years ago
Don't forget to use the recursive option on Windows if creating a folder below a folder that already exists. Otherwise you may get a very confusing error message, "Warning: mkdir(): No such file or directory in d:\path\to\file" where you think the folder should exist but you forgot to create the parent(s).

For example, if d:\path exists but there is nothing in it:

<?php
$path = 'd:\path\to\my\file'; mkdir($path, null, true);
?>
php at mike2k dot com
8 years ago
It should be noted that all of the recursive mkdir functions coded below are no longer required - as of 5.0.0 it says the "recursive" flag is available. I just tested it, it properly works (and I would assume it works for streams and Windows as well, if not, then it would be a bug)
t-k-r at o2 dot pl
7 years ago
Very simple script, may be useful to someone.
Creating a directory structure liki this:

0 ------ 0
1          1
2          2 -------- 0
3          3             1
4          ...           2
5                        3
6                        ...
7
[....]
e
f

Used by my as structure to store uploaded files:
someone upload file -> its name + microtime is md5 -> first 3 letters of md5 string are first 3 subfolders in this folder structure, and at least file is stroed with md5 name.
Naturally SQL- or other type - Database is needed to store infos about files position in this structure.

<?php

for ($a=0;$a<=15;$a++) { mkdir(dechex($a),0755);

for (
$b=0;$b<=15;$b++) { mkdir(dechex($a).'/'.dechex($b),0755); for ($c=0;$c<=15;$c++) {

mkdir(dechex($a).'/'.dechex($b).'/'.dechex($c),0755); } } } ?> bloggernitscomp54engg[at]gmail[dot]com 1 year ago [Editor's note: that behavior is related to the current umask, which is documented above.] mkdir("video/".$userId,0777);

Every time I run this code but permission wont change. It always show 755.I have spent lot of time in why my folder is not getting permission 777 (I think, mkdir has some problem in setting permission ).

then I used this code.

mkdir("video/".$userId,0777); chmod("video/".$userId,0777);

my folder permission get changed 777.
haclong
2 years ago
If you are using the SPL FileInfo object and then try to create the path with mkdir, don't forget that mkdir expects a string as the first argument and NOT an object...

I have forgotten that very important rules and get only a permission deny to mkdir to create new directories but in fact, the issue was the fact that i wasn't passing a string to mkdir

$my_file = new SplFileInfo('path/to/file.txt') ; // get path from file$parent = $my_file->getPathInfo() ; // check if path is directory or not if($parent->isDir())
{
// create / open file.txt file
} else {
// if path/to does not exists, create the directory recursively
mkdir($parent, 0755, true) ; // THIS WON'T WORK because$parent is a SplFileInfo object.

// instead, get the path as a string
$path =$parent->getPathname() ;
mkdir($path, 0755, true) ; // THIS WILL WORK } pz 5 years ago mkdir works with stream wrappers, so it's ok to write mkdir('ftp://user:pass@server/mydir'); which really made my day julius - grantzau - c-o-m 5 years ago Remember to use clearstatcache() ... when working with filesystem functions. Otherwise, as an example, you can get an error creating a folder (using mkdir) just after deleting it (using rmdir). -1 till at etill dot net 1 year ago Note that mkdir() also will return false if the directory exists. So, always use file_exists() to catch an existing-directory error. GelaMu at GMail dot com 8 years ago <?php /** * Makes directory and returns BOOL(TRUE) if exists OR made. * * @param$path Path name
* @return bool
*/
function rmkdir($path,$mode = 0755) {

$path = rtrim(preg_replace(array("/\\\\/", "/\/{2,}/"), "/",$path), "/");

$e = explode("/", ltrim($path, "/"));
if(
substr($path, 0, 1) == "/") {$e[0] = "/".$e[0]; }$c = count($e);$cp = $e[0]; for($i = 1; $i <$c; $i++) { if(! is_dir($cp) && !@mkdir($cp,$mode)) {
return
false;
}

$cp .= "/".$e[$i]; } return @ mkdir($path, $mode); } ?> Michal Nazarewicz, mina86 at mina86 dot com 9 years ago On the other hand, splitting path on something else then a DIRECTORY_SEPARATOR may give unexpected results when someone accualy wants a file name with backslash in it! Moreover, neither Alan's nor pluto's code check for errors or return any value. Also, I don't like the isset($folder[$i]) technique -- there is a count() function you know. <?php function recursive_mkdir($path, $mode = 0777) {$dirs = explode(DIRECTORY_SEPARATOR , $path);$count = count($dirs);$path = '.';
for (
$i = 0;$i < $count; ++$i) {

$path .= DIRECTORY_SEPARATOR .$dirs[$i]; if (! is_dir($path) && !mkdir($path,$mode)) {
return
false;
}
}
return
true;
}
?>

It will only fail if someone specifies a mode which does not allow owner to create new entries in directory.
sean at pedlr dot com
9 years ago
It should be noted that although the documentation says that  the default permissions for mkdir are 0777, this is not always the case.

I'm running LAMP and without explicitly setting the permissions, the directories created had permissions of 0755.
fantasysportswire at yahoo dot com
9 years ago
One small correction on a note from Frank in June 2006 on recursive directories under Windows.

First - this should be in the documentation as its the only function that I know of that php does not fix the slashes automatically.

Franks note stated:

<?php
$mypath ="testdir\subdir\test"; mkdir($mypath,0777,TRUE);
?>

This doesn't work in windows:

<?php
$mypath ="testdir/subdir/test"; mkdir($mypath,0777,TRUE);
?>

----

This will work a bit better :)

<?php
$mypath ="testdir\\subdir\\test"; mkdir($mypath,0777,TRUE);
?>
webmaster2007 at home dot nl
11 years ago
Maybe you can use this:

<?php

function open_dir($dir,$newdir){    //The function that will copy the files

if(file_exists($dir) && file_exists($newdir)){

$open_dir=opendir($dir);
while (
false !== ($file = readdir($open_dir))) {
if(
$file != "." &&$file != ".."){
if(
file_exists($newdir."/".$file) && filetype($newdir."/".$file."/") != "dir"){

unlink($newdir."/".$file);
}
if(
filetype($dir."/".$file."/") == "dir"){
if(!
file_exists($newdir."/".$file."/")){

mkdir($newdir."/".$file."/");

open_dir($dir."/".$file."/", $newdir."/".$file."/");
}
}
else {

copy($dir."/".$file."/", $newdir."/".$file);
}
}
}
}
}

?>
Protik Mukherjee
11 years ago
mkdir, file rw, permission related notes for Fedora 3////
If you are using Fedora 3 and are facing permission problems, better check if SElinux is enabled on ur system. It add an additional layer of security and as a result PHP cant write to the folder eventhough it has 777 permissions. It took me almost a week to deal with this!

If you are not sure google for SElinux or 'disabling SELinux' and it may be the cure! Best of luck!
-1
matt at imaketheweb dot com
5 years ago
If you're getting a Permission Denied error, but are certain the permissions and ownership where you are trying to create the directory are correct, check again:

The location where you are trying to create the directory in must have the Execute permission for the owner trying to create it, regardless of if the folder is Readable, or Writable.

This may be obvious to some, but was not to me at first. Hopefully this will save you the trouble I went through.
-1
Benjamin Rack
5 years ago
It should be mentioned that - at least on Windows - when using UNC paths with mkdir the 2nd parameter $mode should not be specified. Otherwise mkdir fails to create the directory on the given UNC path. -2 michael at neo dot co dot il 6 years ago sometimes the directory created with another mode than specified ( 0755 instead 0777 etc). to solve that use : <?php$old
mkdir($dir,0777); umask($old);
?>
-1
d dot kok at kadova dot nl
7 years ago
Please note that when specifying the recursive option the function returns false anyway if the directory already exists.

For some reason however I expected it to behave like mkdir -p on the command line which succeeds if the directory already exists.
-1
hinom - iMasters
8 years ago
mkdir simple test with "exception handler"

<?php

function handleError() {

trigger_error('MY ERROR');

/** usage sample
@handleError();
echo $php_errormsg; */ } // detect slash/backslash nomenclature dirname$path = dirname( __FILE__ );
$slash = '/'; strpos($path, $slash ) ? '' :$slash = '\\';
define( 'BASE_DIR', $path .$slash );

$folder = time(); // folder name$dirPath = BASE_DIR . $folder; // folder path // print results echo$slash;
echo
'<hr>';

$rs = @mkdir($dirPath, '0777' );
@
handleError();
if(
$rs ) { // print success information echo 'was done!'; echo '<br>folder: <a href="' .$folder . '">' . $folder . '</a>'; echo '<br>dirPath: ' .$dirPath;

}else{

// print error information

echo 'an error was occurred. Attempting create folder';
echo
'<br>dirPath: ' . $dirPath; echo '<br>php_errormsg: ' .$php_errormsg;

}

?>
-2
jamespilcher1hotmail
10 years ago
one small gotcha:

mkdir(""), mkdir(false), and mkdir(null) give a "file exists" error. this is also true of a directory name consisting of any string that only contains space characters.

(this was on php 5.1.2 on Windows 2000)
-1
Kevin Cook
10 years ago
I could not get the sticky bit set properly using the octal mode: 2775 (rwxrwsr-x)

$foo='my_directory';$old_umask = umask(0);
mkdir($foo,2775); umask($old_umask);

using the above lines renders a directory with permissions:

d-wx-wSrwt  2 www www 4096 Nov  2 11:43 my_directory

Not exactly what I was looking for.

This gets closer to the mark:

$foo='my_directory';$old_umask = umask(0);
mkdir($foo,0777); // the default chmod umask($old_umask);

drwxrwsrwx  2 www www 4096 Nov  2 11:46 my_directory
-2
[Rakesh Verma] rakeshnsony at gmail dot com
5 years ago
if you are unable to create recursive folder(s) using 0755 mode in your php script.

Then try it by changing your current user to apache and test it again.

Hopefully you will get positive results
-2
7 years ago
Note that you should NOT enter the $mode value with "" or '' sorrounding it. So, this should be valid: <?php mkdir("dir1/dir2",0777,true); ?> But this is not: <?php mkdir("dir1/dir2","0777",true); ?> Nor this: <?php mkdir("dir1/dir2",'0777',true); ?> -2 david dot NOSPAM at ajnewmedia dot NOSPAM dot co dot uk 8 years ago p-garcia : since PHP 5, setting the recursive flag (which currently has no notes in the manual entry) will allow you to create nested directories in the same way as Windows / Linux mkdir -p, so long as the webserver has permissions to write in the root directory of the path specified eg: <?php mkdir ("./newdir1/newdir2/newdir3/", 0755, true); // Returns TRUE if you have permission to write to the current directory // and creates nested directories with permissionsrwxr-xr-x ?> -6 code at ashleyhunt dot co dot uk 8 years ago Here's a script to create a recursive directory path on NAS or another server using Common Internet File System (CIFS) e.g. you already have a directory on a server \\server/share/dir1/dir2 you want to create some more directories \\server/share/dir1/dir2/dir3/dir4 <?php function remote_mkpath($server, $path) {$dirs = array();

$path = preg_replace('/(\/){2,}|(\\\){1,}/','/',$path); //only forward-slash

$dirs = explode("/",$path);

$path = "\\\\" .$server . "/";

$i = 0; foreach ($dirs AS $element) {$path .= $element . "/"; if(! is_dir($path) && $i != 0) { if(! mkdir($path)){
echo
"something was wrong at : " . $path; return 0; } }$i++;
}
return
true;
echo
$path; } // example usage remote_mkpath("SERVER", "share/dir1/dir2/dir3/dir4"); ?> Good luck! Ashley -6 roth at egotec dot com 11 years ago The 'mkdir' function doesn't function correctly on Windows when the path contains forward slashes. The part of the path with the forward slashes doesn't get created. mkdir('c:/a/b/c/d', 0775, true); You get the error message: Warning: mkdir() [function.mkdir]: No such file or directory Please use backslashes under Windows or use the constant DIRECTORY_SEPARATOR. mkdir('c:\a\b\c\d', 0775, true); mkdir('c:'.DIRECTORY_SEPARATOR.'a'. DIRECTORY_SEPARATOR.'b'. DIRECTORY_SEPARATOR.'c'. DIRECTORY_SEPARATOR.'d', 0775, true); -5 nickcarenza at gmail dot com 5 years ago If you are having trouble with the pathname, use: echo dirname( __FILE__ ); That will show you the pathname of the current script and you will be able to use that to see where you have to start your pathname. I tried forever to do mkdir('dirname') and was getting permission denied. I can see now its because it was trying to create that folder up at home when i wanted it down in public_html. I hope this saves someone some time. -12 Ali Baba 10 years ago Greg, your code does not work for me; maybe it has a bug or we have configuration changes. Anyway, this one works to create recursively the directory DIRECTORY. <? define ("DIRECTORY", "/tmp/mydir/mysubdir"); do {$dir = DIRECTORY;
while (!
is_dir($dir)) {$basedir = dirname($dir); if ($basedir == '/' || is_dir($basedir)) mkdir($dir,0777);
else

$dir=$basedir;
}
} while (
\$dir != DIRECTORY);

?>