This extension is deprecated. Instead, the MongoDB extension should be used.

The MongoDB PHP driver should work on nearly any system: Windows, macOS, Unix, and Linux; little- and big-endian machines; 32- and 64-bit machines; PHP 5.3 through 5.6 (versions prior to 1.6 also support PHP 5.2).

Bu » PECL eklentisi PHP ile gelmez.

Manual Installation

For driver developers and people interested in the latest bugfixes, you can compile the driver from the latest source code on » Github. Go to Github and click the "download" button. Then run:

$ tar zxvf mongo-php-driver-legacy-<commit_id>.tar.gz
$ cd mongo-php-driver-legacy-<commit_id>
$ phpize
$ ./configure
$ make all
$ sudo make install

Make the following changes to php.ini:

  • Make sure the extension_dir variable is pointing to the directory containing mongo.so. The build will display where it is installing the PHP driver with output that looks something like:

    Installing '/usr/lib/php/extensions/no-debug-non-zts-20060613/mongo.so'
    Make sure that it is the same as the PHP extension directory by running:
    $ php -i | grep extension_dir
      extension_dir => /usr/lib/php/extensions/no-debug-non-zts-20060613 =>
    If it's not, change the extension_dir in php.ini or move mongo.so.

  • To load the extension on PHP startup, add a line:


Installing on *NIX


$ sudo pecl install mongo

Add the following line to your php.ini file:


If pecl runs out of memory while installing, make sure memory_limit in php.ini is set to at least 128MB.

Installing on Windows

Precompiled binaries for each release are available from » PECL for a variety of combinations of versions, thread safety, and VC libraries. Unzip the archive and put php_mongo.dll in your PHP extension directory ("ext" by default).

Add the following line to your php.ini file:


Bilginize: Additional DLL dependencies for Windows Users

Bu eklentinin çalışabilmesi için bazı DLL dosyalarının bulunduğu yerlerin Windows sistem PATH'ında tanımlı olması gerekir. Bunun nasıl yapılacağı SSS altında "PHP dizinimi Windows'ta PATH'a nasıl eklerim" başlığı altında açıklanmıştır. Eklenti, DLL dosyaları PHP dizininden Windows system dizinine taşındığında da çalışırsa da (çünkü system dizini sistem PATH'ında zaten vardır) bu önerilmez. Bu eklentinin çalışabilmesi için bulunduğu dizine PATH üzerinden erişebilmesi gereken dosyanın ismi: libsasl.dll


In most cases installing from PECL is the easiest way:

$ sudo pecl install mongo

If your system has multiple version of PHP installed (e.g. macOS default, Homebrew, » XAMPP), note that that each version of PHP has its own pecl command and php.ini file.

Bilginize: Xcode dependency for compiling on macOS

Compiling the driver on macOS will require Xcode developer tools, which may be installed with xcode-select --install. If that command is not available, you may first need to install the » Command Line Tools package.


Gentoo has a package for the PHP PECL driver called dev-php/pecl-mongo, which can be installed with:

$ sudo emerge -va dev-php/pecl-mongo

If you use PECL, you may get an error that libtool is the wrong version. Compiling from source you'll need to run aclocal and autoconf.

$ phpize
$ aclocal 
$ autoconf 
$ ./configure
$ make
$ sudo make install

Red Hat

This includes Fedora and CentOS.

The default Apache settings on these systems do not let requests make network connections, meaning that the driver will get "Permission denied" errors when it tries to connect to the database. If you run into this, try running:

$ /usr/sbin/setsebool -P httpd_can_network_connect 1
Then restart Apache. (This issue has also occurred with SELinux.)

Third-Party Installation Instructions

A number of people have created excellent tutorials on installing the PHP driver.

add a note add a note

User Contributed Notes 6 notes

cap at unagon dot com
11 years ago
For Debian users: apt-get install php5-dev will install phpize for you.
bradley dot henke at colorado dot edu
7 years ago
Instructions for Manually Installing MongoDB for PHP for use with "XAMPP for Linux":

There were two gotchas that I ran into. "XAMPP for Linux" needs 32 bit libraries, and the php API version must match the php API version of "XAMPP for Linux".
Hopefully this will save someone else time figuring this all out!

1) Install "XAMPP for Linux" AND the "XAMPP for Linux Development Files".

2) Grab the source code from github (in the manual instructions above)
$ tar zxvf mongodb-mongodb-php-driver-<commit_id>.tar.gz
$ cd mongodb-mongodb-php-driver-<commit_id>

There are now some smalls deviation from the manual instructions...
3) PHPize
$ sudo /opt/lampp/bin/phpize

4) Configure
$ ./configure

5) Make changes to the Makefile (XAMPP requires a 32-bit compilation)
- Choose your favorite text editor and open "Makefile"
- Make the following changes:
Line 20: prefix = /opt/lampp
Line 23: prefix = /opt/lampp
Line 25: phpincludedir = /opt/lampp/include/php
Line 27: CFLAGS = -g -O2 -m32
Line 34: EXTENSION_DIR = /opt/lampp/lib/php/extensions/no-debug-non-zts-20100525/
Line 35: PHP_EXECUTABLE = /opt/lampp/bin/php

Make sure you replace </path/to/mongo-php-driver-master>
Line 38: INCLUDES = -I/opt/lampp/include/php -I/opt/lampp/include/php/main -I/opt/lampp/include/php/TSRM -I/opt/lampp/include/php/Zend -I/opt/lampp/include/php/ext -I/opt/lampp/include/php/ext/date/lib -I</path/to/mongo-php-driver-master>/util -I</path/to/mongo-php-driver-master>/exceptions -I</path/to/mongo-php-driver-master>/gridfs -I</path/to/mongo-php-driver-master>/types -I</path/to/mongo-php-driver-master>/mcon

6) Compile
$ sudo make all

7) Copy the static object into the extension directory
$ sudo cp modules/mongo.so /opt/lampp/lib/php/extensions/no-debug-non-zts-20100525/

9) Update your php.ini file
- Grab you favorite text editor and open /opt/lampp/etc/php.ini (you'll probably need to use sudo).
- Add the line: extension=mongo.so

10) Restart "XAMPP for Linux". You should now be able to see Mongo listed in your phpinfo() page! Installation Complete!!!

Good Luck!
9 years ago
On windows installation check for VC compilator version inside phpinfo(), if you install incorrect one it wouldn't work.
I tried to run on Apache2 with VC6, and always get folowing error:

Fatal error: Class 'Mongo' not found

Until I look into phpinfo and found MSVC9, after that
I install VC9 dll files and it solve the problem.
8 years ago
To install the Mongo driver on Windows 7 x64 with EasyPHP, you have to use the x86 driver (instead of x64) and non nts :
php_mongo-1.3.2RC1-5.4-vc9.dll actually
poorpuer at gmail dot com
10 years ago
If you're running IIS under Windows 7 and have PHP manager installed you'll also need to manually enable the extension. Start IIS Manager, select PHP Manager, under the section labeled PHP Extensions click on Enable or disable an extension, then enable the php_mongo.dll extension, and restart IIS.
6 years ago
Apache 2.4.10 win32 from apachelounge with php 5.6.4 VC11 x86 Thread Safe on windows7 sp1.
The 5.6 Thread Safe (TS) x86 mongo.dll i downloaded from http://pecl.php.net/package/mongo/1.5.8/windows
I kept getting the following error
PHP Startup: Unable to load dynamic library mongo.dll
The specified module could not be found.
I fixed this by adding the php and the php/ext to the windows path and rebooting(log off didn't cut it).
To Top