simplexml_load_string

(PHP 5, PHP 7, PHP 8)

simplexml_load_string Interprets a string of XML into an object

Description

simplexml_load_string(
    string $data,
    ?string $class_name = SimpleXMLElement::class,
    int $options = 0,
    string $namespace_or_prefix = "",
    bool $is_prefix = false
): SimpleXMLElement|false

Takes a well-formed XML string and returns it as an object.

Parameters

data

A well-formed XML string

class_name

You may use this optional parameter so that simplexml_load_string() will return an object of the specified class. That class should extend the SimpleXMLElement class.

options

Bitwise OR of the libxml option constants.

namespace_or_prefix

Namespace prefix or URI.

is_prefix

true if namespace_or_prefix is a prefix, false if it's a URI; defaults to false.

Return Values

Returns an object of class SimpleXMLElement with properties containing the data held within the xml document, or false on failure.

Warning

This function may return Boolean false, but may also return a non-Boolean value which evaluates to false. Please read the section on Booleans for more information. Use the === operator for testing the return value of this function.

Errors/Exceptions

Produces an E_WARNING error message for each error found in the XML data.

Tip

Use libxml_use_internal_errors() to suppress all XML errors, and libxml_get_errors() to iterate over them afterwards.

Examples

Example #1 Interpret an XML string

<?php
$string
= <<<XML
<?xml version='1.0'?>
<document>
<title>Forty What?</title>
<from>Joe</from>
<to>Jane</to>
<body>
I know that's the answer -- but what's the question?
</body>
</document>
XML;

$xml = simplexml_load_string($string);

print_r($xml);
?>

The above example will output:

SimpleXMLElement Object
(
  [title] => Forty What?
  [from] => Joe
  [to] => Jane
  [body] =>
   I know that's the answer -- but what's the question?
)

At this point, you can go about using $xml->body and such.

See Also

add a note

User Contributed Notes 22 notes

up
35
ascammon at hotmail dot com
13 years ago
I had a hard time finding this documented, so posting it here in case it helps someone:

If you want to use multiple libxml options, separate them with a pipe, like so:

<?php
$xml
= simplexml_load_string($string, 'SimpleXMLElement', LIBXML_NOCDATA | LIBXML_NOBLANKS);
?>
up
22
Diego Araos, diego at klapmedia dot com
13 years ago
A simpler way to transform the result into an array (requires json module).

<?php
function object2array($object) { return @json_decode(@json_encode($object),1); }
?>

Example:
<?php
$xml_object
=simplexml_load_string('<SOME XML DATA');
$xml_array=object2array($xml_object);
?>
up
6
meustrus
9 years ago
Be careful checking for parse errors. An empty SimpleXMLElement may resolve to FALSE, and if your XML contains no text or only contains namespaced elements your error check may be wrong. Always use `=== FALSE` when checking for parse errors.

<?php

$xml
= <<<XML
<?xml version="1.0" encoding="UTF-8"?>
<ns1:Root xmlns:ns1="http://example.com/custom">
<ns1:Node>There's stuff here</ns1:Node>
</ns1:Root>
XML;

$simplexml = simplexml_load_string($xml);

// This prints "Parse Error".
echo ($simplexml ? 'Valid XML' : 'Parse Error'), PHP_EOL;

// But this prints "There's stuff here", proving that
// the SimpleXML object was created successfully.
echo $simplexml->children('http://example.com/custom')->Node, PHP_EOL;

// Use this instead:
echo ($simplexml !== FALSE ? 'Valid XML' : 'Parse Error'), PHP_EOL;

?>

See:

https://bugs.php.net/bug.php?id=31045
https://bugs.php.net/bug.php?id=30972
https://bugs.php.net/bug.php?id=69596
up
14
rowan dot collins at gmail dot com
16 years ago
There seems to be a lot of talk about SimpleXML having a "problem" with CDATA, and writing functions to rip it out, etc. I thought so too, at first, but it's actually behaving just fine under PHP 5.2.6

The key is noted above example #6 here:
http://uk2.php.net/manual/en/simplexml.examples.php

"To compare an element or attribute with a string or pass it into a function that requires a string, you must cast it to a string using (string). Otherwise, PHP treats the element as an object."

If a tag contains CDATA, SimpleXML remembers that fact, by representing it separately from the string content of the element. So some functions, including print_r(), might not show what you expect. But if you explicitly cast to a string, you get the whole content.

<?php
$xml
= simplexml_load_string('<foo>Text1 &amp; XML entities</foo>');
print_r($xml);
/*
SimpleXMLElement Object
(
[0] => Text1 & XML entities
)
*/

$xml2 = simplexml_load_string('<foo><![CDATA[Text2 & raw data]]></foo>');
print_r($xml2);
/*
SimpleXMLElement Object
(
)
*/
// Where's my CDATA?

// Let's try explicit casts
print_r( (string)$xml );
print_r( (string)$xml2 );
/*
Text1 & XML entities
Text2 & raw data
*/
// Much better
?>
up
11
bojan
16 years ago
As was said before don't use var_dump() or print_r() to see SimpleXML object structure as they do not returns always what you expect.
Consider the following:

<?php

// data in xml
$xml_txt = '
<root>
<folder ID="65" active="1" permission="1"><![CDATA[aaaa]]></folder>
<folder ID="65" active="1" permission="1"><![CDATA[bbbb]]></folder>
</root>'
;

// load xml into SimpleXML object
$xml = simplexml_load_string($xml_txt, 'SimpleXMLElement', LIBXML_NOCDATA);//LIBXML_NOCDATA LIBXML_NOWARNING

// see object structure
print_r($xml);

/* this prints
SimpleXMLElement Object
(
[folder] => Array
(
[0] => aaaa
[1] => bbbb
)

)
*/

// but...
foreach ($xml->folder as $value){
print_r($value);
}
/* prints complete structure of each folder element:
SimpleXMLElement Object
(
[@attributes] => Array
(
[ID] => 65
[active] => 1
[permission] => 1
)

[0] => aaaa
)

SimpleXMLElement Object
(
[@attributes] => Array
(
[ID] => 65
[active] => 1
[permission] => 1
)

[0] => bbbb
)

*/
?>
up
2
amir_abiri at ipcmedia dot com
16 years ago
It doesn't seem to be documented anywhere, but you can refer to an element "value" for the purpose of changing it like so:

<?php
$xml
= simplexml_load_string('<root><number>1</number></root>');
echo
$xml->asXml(). "\n\n";

$xml->number->{0} = $xml->number->{0} + 1;

echo
$xml->asXml();
?>

echos:
<?xml version="1.0"?>
<root><number>1</number></root>

<?xml version="1.0"?>
<root><number>2</number></root>

However, this only works with a direct assignment, not with any of the other operators:

<?php
$xml
= simplexml_load_string('<root><number>1</number></root>');
echo
$xml->asXml(). "\n\n";

$xml->number->{0} += 1;
// Or:
$xml->number->{0}++;

echo
$xml->asXml();
?>

Both of the above cases would result in:

<?xml version="1.0"?>
<root><number>1</number></root>

<?xml version="1.0"?>
<root><number>1<0/></number></root>
up
3
nbijnens at servs dot eu
17 years ago
Please note that not all LIBXML options are supported with the options argument.

For instance LIBXML_XINCLUDE does not work. But there is however a work around:

<?php
$xml
= new DOMDocument();
$xml->loadXML ($XMLString);

$xml->xinclude();
$xml = simplexml_import_dom($xml);

?>
up
1
hattori at hanso dot com
17 years ago
Theres a problem with the below workaround when serializing fields containing html CDATA. For any other content type then HTML try to modfiy function parseCDATA.
Just add these lines before serializing.
This is also a workaround for this bug http://bugs.php.net/bug.php?id=42001

<?PHP
if(strpos($content, '<![CDATA[')) {
function
parseCDATA($data) {
return
htmlentities($data[1]);
}
$content = preg_replace_callback(
'#<!\[CDATA\[(.*)\]\]>#',
'parseCDATA',
str_replace("\n", " ", $content)
);
}
?>
up
2
mindpower
17 years ago
A simple extension that adds a method for retrieving a specific attribute:

<?php
class simple_xml_extended extends SimpleXMLElement
{
public function
Attribute($name)
{
foreach(
$this->Attributes() as $key=>$val)
{
if(
$key == $name)
return (string)
$val;
}
}

}

$xml = simplexml_load_string('
<xml>
<dog type="poodle" owner="Mrs Smith">Rover</dog>
</xml>'
, 'simple_xml_extended');

echo
$xml->dog->Attribute('type');

?>

outputs 'poodle'

I prefer to use this technique rather than typecasting attributes.
up
1
javalc6 at gmail dot com
16 years ago
I wanted to convert an array containing strings and other arrays of the same type into a simplexml object.

Here is the code of the function array2xml that I've developed to perform this conversion. Please note that this code is simple without any checks.

<?php
function array2xml($array, $tag) {

function
ia2xml($array) {
$xml="";
foreach (
$array as $key=>$value) {
if (
is_array($value)) {
$xml.="<$key>".ia2xml($value)."</$key>";
} else {
$xml.="<$key>".$value."</$key>";
}
}
return
$xml;
}

return
simplexml_load_string("<$tag>".ia2xml($array)."</$tag>");
}

$test['type']='lunch';
$test['time']='12:30';
$test['menu']=array('entree'=>'salad', 'maincourse'=>'steak');

echo
array2xml($test,"meal")->asXML();
?>
up
1
Bob
15 years ago
Here is my simple SimpleXML wrapper function.
As far as I can tell, it does the same as Julio Cesar Oliveira's (above).
It parses an XML string into a multi-dimensional associative array.
The second argument is a callback that is run on all data (so for example, if you want all data trimmed, like Julio does in his function, just pass 'trim' as the second arg).
<?php
function unserialize_xml($input, $callback = null, $recurse = false)
/* bool/array unserialize_xml ( string $input [ , callback $callback ] )
* Unserializes an XML string, returning a multi-dimensional associative array, optionally runs a callback on all non-array data
* Returns false on all failure
* Notes:
* Root XML tags are stripped
* Due to its recursive nature, unserialize_xml() will also support SimpleXMLElement objects and arrays as input
* Uses simplexml_load_string() for XML parsing, see SimpleXML documentation for more info
*/
{
// Get input, loading an xml string with simplexml if its the top level of recursion
$data = ((!$recurse) && is_string($input))? simplexml_load_string($input): $input;
// Convert SimpleXMLElements to array
if ($data instanceof SimpleXMLElement) $data = (array) $data;
// Recurse into arrays
if (is_array($data)) foreach ($data as &$item) $item = unserialize_xml($item, $callback, true);
// Run callback and return
return (!is_array($data) && is_callable($callback))? call_user_func($callback, $data): $data;
}
?>
up
1
AllenJB
12 years ago
<?php
$xml
= json_decode(json_encode((array) simplexml_load_string($string)), 1);
?>

A reminder that json_encode attempts to convert data to UTF-8 without specific knowledge of the source encoding. This method can cause encoding issues if you're not working in UTF-8.
up
1
Julio Cesar Oliveira
15 years ago
The XML2Array func now Recursive!

<?php
function XML2Array ( $xml , $recursive = false )
{
if ( !
$recursive )
{
$array = simplexml_load_string ( $xml ) ;
}
else
{
$array = $xml ;
}

$newArray = array () ;
$array = ( array ) $array ;
foreach (
$array as $key => $value )
{
$value = ( array ) $value ;
if ( isset (
$value [ 0 ] ) )
{
$newArray [ $key ] = trim ( $value [ 0 ] ) ;
}
else
{
$newArray [ $key ] = XML2Array ( $value , true ) ;
}
}
return
$newArray ;
}
?>
up
0
artistan at gmail dot com
9 years ago
Here is my update to Bob's simple SimpleXML wrapper function.
I noticed his version would turn an empty SimpleXMLElement into an empty array.

<?php
/**
* http://php.net/manual/en/function.simplexml-load-string.php#91564
*
* bool/array unserialize_xml ( string $input [ , callback $callback ] )
* Unserializes an XML string, returning a multi-dimensional associative array, optionally runs a callback on all non-array data
* Returns false on all failure
* Notes:
* Root XML tags are stripped
* Due to its recursive nature, unserialize_xml() will also support SimpleXMLElement objects and arrays as input
* Uses simplexml_load_string() for XML parsing, see SimpleXML documentation for more info
*
* @param $input
* @param null $callback
* @param bool $recurse
* @return array|mixed
*
*/
function unserialize_xml($input, $callback = null, $recurse = false)
{
// Get input, loading an xml string with simplexml if its the top level of recursion
$data = ((!$recurse) && is_string($input))? simplexml_load_string($input): $input;
// Convert SimpleXMLElements to array
if ($data instanceof SimpleXMLElement){
if(!empty(
$data)){
$data = (array) $data;
} else {
$data = '';
}
}
// Recurse into arrays
if (is_array($data)) foreach ($data as &$item) $item = unserialize_xml($item, $callback, true);
// Run callback and return
return (!is_array($data) && is_callable($callback))? call_user_func($callback, $data): $data;
}
?>
up
0
Anonymous
12 years ago
Use libxml_disable_entity_loader() to restrict loading of external files. See http://www.idontplaydarts.com/2011/02/scanning-the-internal-network-using-simplexml/
up
0
jeff at creabilis dot com
14 years ago
If you want to set the charset of the outputed xml, simply set the encoding attribute like this :

<?php simplexml_load_string('<?xml version="1.0" encoding="utf-8"?><xml/>'); ?>

The generated xml outputed by $xml->asXML will containt accentuated characters like 'é' instead of &#xE9;.

Hope this help
up
0
m dot ament at mailcity dot com
17 years ago
Warning:

The parsing of XML-data will stop when reaching character 0.
Please avoid this character in your XML-data.
up
0
cellog at php dot net
20 years ago
simplexml does not simply handle CDATA sections in a foreach loop.

<?php
$sx
= simplexml_load_string('
<test>
<one>hi</one>
<two><![CDATA[stuff]]></two>
<t>
<for>two</for>
</t>
<multi>one</multi>
<multi>two</multi>
</test>'
);
foreach((array)
$sx as $tagname => $val) {
if (
is_string($val)) {
// <one> will go here
} elseif (is_array($val)) {
// <multi> will go here because it happens multiple times
} elseif (is_object($val)) {
// <t> will go here because it contains tags
// <two> will go here because it contains CDATA!
}
}
?>

To test in the loop, do this

<?php
if (count((array) $val) == 0) {
// this is not a tag that contains other tags
$val = '' . $val;
// now the CDATA is revealed magically.
}
?>
up
-1
Pedro
17 years ago
Attention:

simplexml_load_string has a problem with entities other than (&lt;, &gt;, &amp;, &quot; and &apos;).

Use numeric character references instead!
up
-2
Maciek Ruckgaber <maciekrb at gmai dot com>
19 years ago
after wondering around some time, i just realized something (maybe obvious, not very much for me). Hope helps someone to not waste time as i did :-P

when you have something like:

<?php
$xmlstr
= <<<XML
<?xml version="1.0" encoding="utf-8"?>
<double xmlns="http://foosite.foo/">2328</double>
XML;
?>

you will have the simpleXML object "transformed" to the text() content:

<?php
$xml
= simplexml_load_string($xmlstr);
echo
$xml; // this will echo 2328 (string)
?>
up
-4
erguven dot m at gmail dot com
7 years ago
if you want to use a class which exists in a name space, use it full name. simple_load_string did not recognize short one.

class.new.php
<?php
namespace foo\bar;

class new extends
SimpleXMLElement
{
public function do()
{
echo
"done";
}
}
?>

false.php
<?php
use \foo\bar\new;

$result = simplexml_load_string($xml, 'new'); // it gives warning
$result->do(); // fatal error
?>

true.php
<?php
use \foo\bar\new;
$result = simplexml_load_string($xml, '\foo\bar\new');

$result->do(); // prints done
?>
To Top