search for in the

 Last updated: Fri, 17 May 2013

# system

(PHP 4, PHP 5)

systemEjecutar un programa externo y mostrar su salida

### Descripción

string system ( string $command [, int &$return_var ] )

system() es similar a la versión C de la función de mismo nombre, dado que ejecuta el command dado y muestra el resultado.

La llamada a system() también intenta volcar automáticamente el búfer de salida del servidor web después de cada línea de salida, si PHP está corriendo como un módulo de servidor.

Si necesita ejecutar un comando y recibir de vuelta todo los datos del mismo sin interferencias, use la función passthru().

### Parámetros

comando

return_var

Si el argumento return_var se encuentra presente, entonces el status devuelto por el comando ejecutado será almacenado en esta variable.

### Valores devueltos

Devuelve la última línea de la salida del comando en caso de tener éxito, y FALSE si ocurre un error.

### Ejemplos

Ejemplo #1 Ejemplo de system()

<?php
echo '<pre>';

// Muestra el resultado completo del comando "ls", y devuelve la
// ultima linea de la salida en $ultima_linea. Almacena el valor de // retorno del comando en$retval.
$ultima_linea system('ls'$retval);

echo '
</pre>
<hr />Ultima linea de la salida: '
$ultima_linea ' <hr />Valor de retorno: '$retval;
?>

### Notas

Si se va a permitir que datos provenientes del usuario sean enviados a esta función, habría que utilizar escapeshellarg() o escapeshellcmd() para asegurarse que el usuario no intenta engañar al sistema para que ejecute comandos arbitrarios.

Nota:

Si ejecutamos un programa con esta función y queremos dejarlo ejecutándose en segundo plano, hay que asegurarse que la salida del mismo es redireccionada a un fichero u otro flujo de salida o PHP se quedará esperando hasta que la ejecución del programa termine.

Nota: Cuando safe mode está habilitado, sólo se pueden ejecutar los archivos que se encuentren dentro de safe_mode_exec_dir. Por razones prácticas, actualmente no se le permite tener componentes .. en la ruta al ejecutable.

Con safe mode habilitado, la cadena de comandos se escapa con escapeshellcmd(). Por esto, echo y | echo x quedaría echo y \| echo x.

### Ver también

 Last updated: Fri, 17 May 2013

User Contributed Notes system - [68 notes]
no at mail dot com
1 year ago
This is for WINDOWS users. I am running apache and I have been trying for hours now to capture the output of a command.

I'd tried everything that is written here and then continued searching online with no luck at all. The output of the command was never captured. All I got was an empty array.

Finally, I found a comment in a blog by a certain amazing guy that solved my problems.

Adding the string ' 2>&1' to the command name finally returned the output!! This works in exec() as well as system() in PHP since it uses stream redirection to redirect the output to the correct place!

system("yourCommandName 2>&1",$output) ; mortoray at ecircle-ag dot com 9 years ago Do not use "system" if you use the "php.ini" option: zlib.output_compression = On Doing so will result in the browser receiving garbage (I'm guessing the headers/buffers get confused). Use passthru in this case, it appears to work as intended. ryan at seattleone dot com 11 years ago I was trying to use the system command, and I couldnt get it to work, then it occured to me, send the stderr to a file to see what is really happening. system($command . " &> /tmp/error " );
grytolle at gmail dot com
4 years ago
A more direct approach:

<?php
function runAsynchronously($path) {$WshShell = new COM("WScript.Shell");

$oExec =$WshShell->Run(addslashes($path), 7, false); unset($WshShell,$oExec); } ?> al at aj8 dot org 4 years ago In response to willytk at gmail dot com, 10-Sep-2007 01:39 If imagemagick / convert from eps or pdf is not working because the gs executable is not in the apache path, you can compile imagemagick with --with-frozenpaths This makes imagemagick store the full path to the gs executable. The error I was getting before was "sh: gs: command not found" when convert was called with "-debug All" Cheers Alastair Battrick admin at nabeelakhtar dot net 8 years ago Windows XP (IIS) users: (Unable to fork Problem) If you receive something like: Warning: passthru() [function.passthru]: Unable to fork [dir] in c:\Inetpub\wwwroot\ping.php on line X 1. Copy CMD.EXE file from the Windows\System32\ folder to your PHP directory (c:\PHP\). This should fix the problem. srawlinNOSPAM at magma dot ca 8 years ago If you are running PHP in a chroot environment then the system (and passthru) function needs /bin/sh to be located in the chroot as well. eric_REMOVE at movementmovement_REMOVE dot com 9 years ago It's important to note that if you are running a series of system() commands in a loop, you need to include the second argument in order for them to run synchonously. ie) // this will execute process.php asynchronously; not waiting for completion before executing the next one.$array = array('apple', 'banana', 'pear');
foreach($array as$i)
{
system("php process.php \"fruit=$i\""); } // this will execute process.php 3 times, waiting for the prior command to complete before starting a new one$array = array('apple', 'banana', 'pear');
foreach($array as$i)
{
system("php process.php \"fruit=$i\"",$status);
}
n-jones at fredesign dot net
10 years ago
To have system output from both the STDERR and STDOUT, I've modified the function posted above by lowery@craiglowery.com

function mysystem($command) { if (!($p=popen("($command)2>&1","r"))) { return 126; } while (!feof($p)) {
$line=fgets($p,1000);
$out .=$line;
}
pclose($p); return$out;
}

Now you can use mysystem() like;

$var = "cat ".$file;
echo mysystem($var);$catfile = mysystem($var); if (ereg("text",$catfile)) {
//stuff here;
}

N.Jones
vlad dot sharanhovich at gmail dot com
5 years ago
The double quote problem on Windows platform discussed earlier here in comments still present in PHP 5.2.5. You can't execute system($command) if$command contains more than 2 " chars. system('"echo" A'); works, while system('"echo" "A"'); does not. Search comment, that was a solution posted to overhaul this issue via temporary .bat file.
9 years ago
BUGFIX for the mysystem() function, posted by n-jones.

<?php
function syscall($command){ if ($proc = popen("($command)2>&1","r")){ while (! feof($proc)) $result .= fgets($proc, 1000);

pclose($proc); return$result;
}
}
?>

Hello from Russia! :)
djem.
grytolle at gmail dot com
4 years ago
This is a work-around that makes the program run in it's own directory instead of the script's.

example usage:
<?php runAsynchronously("c:\games\jazz2\jazz2.exe","-connect 1.2.3.4"); ?>

<?php
function runAsynchronously($path,$arguments) {

$WshShell = new COM("WScript.Shell");$oShellLink = $WshShell->CreateShortcut("temp.lnk");$oShellLink->TargetPath = $path;$oShellLink->Arguments = $arguments;$oShellLink->WorkingDirectory = dirname($path);$oShellLink->WindowStyle = 1;

$oShellLink->Save();$oExec = $WshShell->Run("temp.lnk", 7, false); unset($WshShell,$oShellLink,$oExec);

}
?>
tr4nc3 at msn dot com
9 years ago
I almost gave up trying to get Windows XP w/ Apache 2 to use either system(), or exec() to run a batch file.

echo test > test.txt

it would work fine, creating test.txt...

but if the batch file was..

iexplore.exe "http://www.ibm.com"

I would get nothing. After hours and hours of messing around with this I figured it must be some type of permission problem. (dugh!)

Long story a little shorter.. You have to give Apache permission to "interact with the desktop".

Here's how...

Start>Run>services.msc
Right click "Apache...", select properties.
Click on the "LOG ON" tab
Check the box "Allow this service to interact with desktop"
Click OK
Restart Apache

Works great!
:D

HOPE THIS HELPS SOMEONE!
Too bad I didn't find a post like this before I figured it out myself. (I could have been working on something.)
lc at _REMOVE__THIS_lc dot yi dot org
9 years ago
Re: cpmorris at hotmail dot com and WINNT.

I just spent some time learning to use the php system function.  I managed to get long file names to work for me.  It seems you need to take the same approach that batch files, WSH, and most other programming languages do under WinNT/2K/XP.  Putting double quotes around the Path+Filename seems to work.  So, something like this should have worked for you:

"c:\program files\apache group\apache2\bin\htpasswd"

Note that if you have parameters, they go OUTSIDE of the last quote.  Oh, and don't forget to escape the slashes and quotes!

I don't know what htpasswd's params are, but let us pretend:

$cmd="\"c:\\program files\\apache group\\apache2\\bin\\htpasswd\" username password";$str=system($cmd); Hope this helps someone! Leonard http:\\www.lc.yi.org ed at lexingrad dot net 10 years ago best use I have found for this function so far: <?php$fortune
= /usr/games/fortune -aeo;

$var = eregi_replace("\n", "<br>",$fortune);

echo
$var; ?> that's with all the fortune's installed, including the dirty ones. the reg expression replace formats them correctly roger at proproject dot com 11 years ago For your in-house pages, I recommend redirecting stderr to stdout so you'll know if something goes wrong. Here's a real-life example: system("/mysql_reboot 2>&1"); nospam at php dot net 12 years ago If you are trying to parse a CGI script to your webserver which needs arguments, take a look to the virtual() function .. it took me long before i found out it existed... It's used like this: <?php virtual ("/cgi-bin/lastuser.cgi?argument"); ?> And that works excellent now for me -1 dotmg at wikkàwiki dot ORG 6 years ago In system($command), $command cannot contain no more than two doublequotes. (At least with 4.3.3, on Windows). IF the path+executable name contains any space (and thus enclosed in double quotes). <?php /** * This example works fine, there is only 2 double quotes */ system ("\"c:\\program files\\myapp\\myapp.exe\" params_for_myapp"); /** * This one will fail, php will complain sthg like c:\\program is not an executable */ system ("\"c:\\program files\\myapp\\myapp.exe\" \"One param for myapp that contains space\""); // /** * If you want your script to be able to run with older version of PHP (like 4.3.3), this is a trick: * Save the command in a temporary file and call that file */$tmpnam = tempname($writable_dir, "temp").".bat";$fp = fopen ($tmpnam, "w"); fwrite($fp, $command); fclose ($fp);

system($tmpnam,$status);

unlink($tmpnam); ?> Note: In my preview, backslashes were gone! KrishnaSrikanth(.com) 1 year ago On a controlled Windows Hosting (XP or Server 2003), if system("mysqldump... >filename.sql") is creating sql file, but not dumping data, try giving the complete path to the mysqldump.exe. Try the following command. Notice the double quotes and some escapes in the command.$mysqlDumpCommand = "\"C:\\Program Files\\MySQL\\MySQL Server 5.5\\bin\\mysqldump.exe\" -u ".$userName.' -p'.$password.' --databases ' . $databaseName . '>' .$sqlFileName;
system(sprintf($mysqlDumpCommand)); daveloop 2 years ago I was trying to get the server-side to beep in windows 7. I finally found something that would work without creating my own EXE. Create a batch file with at the CMD prompt type: echo @echo (Alt-7)>beep.bat Then execute it in PHP with: exec ('start /MIN c:\your_path_here\beep.bat'); NOTE: The only drawback I can find is that a cmd.exe does visually flash on the system (which is why I used the /MIN to ensure it only goes to the taskbar). Not really sure why I don't like that, but it was a side effect that I wasn't looking for. kexianin at diyism dot com 3 years ago If you can't see any output or error from system(), shell_exec() etc, you could try this: <?php function my_exec($cmd, $input='') {$proc=proc_open($cmd, array(0=>array('pipe', 'r'), 1=>array('pipe', 'w'), 2=>array('pipe', 'w')),$pipes);

fwrite($pipes[0],$input);fclose($pipes[0]);$stdout=stream_get_contents($pipes[1]);fclose($pipes[1]);

$stderr=stream_get_contents($pipes[2]);fclose($pipes[2]);$rtn=proc_close($proc); return array( 'stdout'=>$stdout,

'stderr'=>$stderr, 'return'=>$rtn

);
}
var_export(my_exec('echo -e $(</dev/stdin) | wc -l', 'h\\nel\\nlo')); ?> For example, "echo shell_exec('ls');" will get nothing output, "my_exec('ls');" will get "sh: ls: command not found", "my_exec('/bin/ls');" will maybe get "sh: /bin/ls: Permission denied", and the permission may be caused by selinux. ca at php dot net dot spamtrak dot org 3 years ago If you don't want the output of your command echoed to STDOUT while using PHP for scripting (Unix/CLI) use exec() instead of system(). May apply to CGI versions, YMMV. <?php$cmd
= "date";

$output = system($cmd);

printf("System Output: $output\n"); exec($cmd, $results); printf("Exec Output: {$results[0]}\n");

/*
Output:
Mon Oct 26 19:30:08 EST 2009
System Output: Mon Oct 26 19:30:08 EST 2009
Exec Output: Mon Oct 26 19:30:08 EST 2009
*/
?>
Daniel Morris (danielxmorris.com)
4 years ago
How to produce a system beep with PHP.

<?php

function beep ($int_beeps = 1) { for ($i = 0; $i <$int_beeps; $i++):$string_beeps .= "\x07"; endfor;
isset (
$_SERVER['SERVER_PROTOCOL']) ? false : print$string_beeps;
}

?>

This will not do anything when running through a browser, if running through a shell it will produce an audible beep $int_beeps times. This should work on Windows, Unix, etc. Dennis 5 years ago If you are writing CLI scripts in PHP and call external programs which produce some kind of progress bar you should really use passthru() for the output of the external program to go to the terminal immediately. Such progress bar are usually done by outputing the string with "\r" at the end, and contain no "\n". system() and friends look for "\n" before flushing the buffer. As a result, you see nothing during the lengthy operation and suddenly you get the 100% reading, because all output was buffered and quickly replayed into the terminal when the final "\n" has been seen. Billybob 5 years ago Hi I'm a newbie in php, and I was wondering if it's possible to use multiple line with "system". Here is an example:$commandeDB1 = system ("cd \
cd mysql
cd bin
mysql -uroot -pedfdiver -P3307
use diver_1
insert into cdn_flv_8(flv_file,cdn_dn_or_ip,video_path,flv_groups
values('$fichier','130.98.61.32','/diver_edf/video_1/','0');"); Thanks willytk at gmail dot com 5 years ago If you're having problems with getting imagemagick/convert to work with ghostscript because the gs executable isn't in the apache PATH, do the following: To create a thumb of the first pdf page: <?php$command
= 'export PATH=$PATH:/sw/bin; convert "files/example.pdf[0]" -thumbnail 150x150 "files/thumbs/example.png"';$lastline = system($command,$return);
?>

Regards,

Willy T. Koch
Oslo, Norway
timgolding_10 at hotmail dot com
5 years ago
An example of using the system to call the file command on a linux server. This script detects whether a user posted file is a jpeg, gif or png

<?PHP

$accepted_types =array("JPEG" , "GIF", "PNG"); // The temporary filename of the file in which the uploaded file was stored on the server. if(!empty($_FILES["uploadedfile"]))
{

$uploaddir =$_SERVER['DOCUMENT_ROOT']."/images/";

$uploaddir.=basename($_FILES['uploadedfile']['name']);

//verfiy file using linux FILE command

$last_line = system('file '.escapeshellarg($_FILES['uploadedfile']['tmp_name']), $retval); //get the file extension returned through magic database$splitvals=explode(' image data' $last_line);$vals=explode(':', $splitvals[0]);$vals[1]=str_replace(' ','', $vals[1]); if ( in_array($vals[1], $accepted_types)) { echo$vals[1].' was accepted <br />';
if(!
file_exists($uploaddir)){ //Copy the file to some permanent location if(move_uploaded_file($_FILES["uploadedfile"]["tmp_name"], $uploaddir)) { echo$uploaddir." was uploaded! <br />";
}
else
{
echo
}
}
else echo
}
}else echo
$_FILES['uploadedfile']['error'].'<br />'; ?> eis 5 years ago It should be noted, too, that "unable to fork" error in Windows also occurs if you try to send a command that's too long for cmd.exe to process. peter at randomnity dot com 6 years ago Just a note to dan at thecsl dot org 0 and FALSE are _NOT_ the same. You can check for false like so: <?php if($return_val === FALSE) {

// ....
} else if ($return_val == 0) { // ... } // Continue... ?> jordan314 at mailinator dot com 6 years ago z1a7n8g, your system logging to file function was really useful, but had two errors:$line=fgets($fPtr,filesize("yourfile.php"); that line needs a second closing ')' and: while ($line)
returns true until your script runs out of memory. Those two lines can be combined:
while($line=fgets($fPtr,filesize("yourfile.php")));
norman_ss at hotmail dot com
6 years ago
thanks to tr4nc3,

I'm trying to, from the explorer, run an access's macro and this example give me the solution:

You can execute a .bat file with the especifications that give us tr4nc3.
After, in this .bat file, you can execute msacces.exe and pass /x parameter with the name of the macro. like this:

"c:\windows\system32\cmd.exe /c <path or the msaccess.exe>" <path of the .mdb file> /x <name of the macro>"

At the end of the .bat file you have to put "exit" and the thread will end.

Thanks to tr4nc3!
dan at thecsl dot org
6 years ago
You probably want to check your system calls for errors. The convention is to return 0  for "no error" which is the same as FALSE which can be confusing. You need to do something like:

<?php
$cmd = "/usr/bin/pngtopnm$png_file > $pnm_file"; system($cmd,$return_value); ($return_value == 0) or die("returned an error: $cmd"); ?> matt-php at cdsportland dot com 7 years ago If using Windows with IIS and you're having problems with the system() and related commands, I found the easiest way to solve it was to modify the Authentication Method for the file (or directory) that uses the call and change the anonymous access user from the default (IUSR_IMAGE) to a user with enough permissions to execute the commands in the system call. This way, there is no need to give execute permissions to IUSR_IMAGE on cmd.exe (which opens up a security risk system-wide) or copy cmd.exe into your php directory (per the suggestions of others). Hope this helps someone! 151408626 dot unique at servux dot org 7 years ago The documentation notes that for making a program running in the background: ... you have to make sure that the output of that program is redirected to a file or some other output stream ... But simply redirecting the command's output to a fifo will also cause PHP to wait for the command to terminate, even if it is started in background. After quite a bit of trial & error, however I figured out that the trick (mentioned in some other note) using parenthesis to regain control over an already redirected STDOUT does work here, too: <? // this will not execute the echo in background while continuing the PHP-script, // as one might expect system("echo 'something' >$someFIFO &");

// however that will do the trick - the echo is run in background, waiting until the data is read
//    from the FIFO, while your PHP-script continues execution, e.g. being able to open that
//    FIFO for read without being blocked until some data will arrive!!
system("(echo 'something' >$someFIFO) >/dev/null &"); ?> cho at stunt growth dot com 7 years ago Note to the persons who suggested using backticks for gathering a return value from scripts via system(). Using Backticks is generally frowned upon for security sake. They can be exploited more easily. Instead, why not use the exec() function with a return parameter specified as an array type. This will allow you to take the full string returned from your script (for example rsync) and return each line in an array. like so:$result = array();
exec( $cmd, &$result);
foreach ( $result as$v )
{
// parse, or do cool stuff
}

Hope this alternative brings you merriment.
vdweij at hotmail dot com
7 years ago
It is possible to only capture the error stream (STERR). Here it goes...

(some_command par1 par2 > /dev/null) 3>&1 1>&2 2>&3

-First STDOUT is redirected to /dev/null.
-By using parenthesis it is possible to gain control over STERR and STOUT again.
-Then switch STERR with STOUT.

The switch is using the standard variable switch method -- 3 variables (buckets) are required to swap 2 variables with each other. (you have 2 variables and you need to switch the contents - you must bring in a 3rd temporary variable to hold the contents of one value so you can properly swap them).

This link gave me this information:
http://www.cpqlinux.com/redirect.html
Stuart Prescott
8 years ago
Note that for stderr redirection, you have to use double quotes (") not single quotes (') for the 2>&1 part at least.

<?
//e.g. the this will NOT do what you expect:
exec('mysqldump -h localhost ...... 2>&1', $output); //but this will: exec("mysqldump -h localhost ...... 2>&1",$output);
?>

*sigh*

(Sounds like a PHP bug to me..., or at least buggy docs!)
phil at pjhayward.net
8 years ago
On Windows XP, (possibly others)

If you are getting the unable to fork error, make sure the internet guest user has permission to read and execute the \Windows\System32\cmd.exe file.
Shai Coleman
8 years ago
The easiest way to run a process in the background under Windows, is to use system() with the bgrun.exe utility, available from http://www.jukkis.net/bgrun/
roga at yoopee dot de
8 years ago
In combination with Zend Optimizer and Windows 2K/XP some programs may not run with system(), exec(), etc.

I tried to use a small tool for ejecting the cd tray and it did just nothing. Disabling Zend Optimizer solved it.
beetung at yahoo dot com
9 years ago
Under Linux

exec("/home/www/cgi-bin/runProg $a$b");

works ok when I execute the script using > php myscript.php but fails to show the output when run via the web browser.

When I give it the exact full path without the symbolic link

exec("/mnt/Downloads/www.site.com/cgi-bin/runProg $a$b");

everything works perfectly.
diogaogv at icqmail dot com
9 years ago
a really useful use for import(); while running the server at ur own machine is taking a screenshot of you desktop and showing it to the guest !!!

<?
echo system("/usr/X11R6/bin/import -window root -display localhost:0 /mnt/d/Desenvolvimento/Desenvolvimento\ WWW/import/cache/imagem.jpg -quality 30" ." 2>&1");
?>
<img src="cache/imagem.jpg">

remember to set chmod 777 to your directory (called "cache" on my code). also do "xhost +" or you r gonna get a xlib error saying that it could not connect to x server at localhost...

the code is still too simple. i've just done it. e.g. you can improve a real cache system avoying more than one screenshot in a minute while...

that is it! hope u enjoy it ( rofl... =DDD ) ...

diogo86
tomlubbock at hotmail dot com
9 years ago
If you need to run root-level commands, such as to reboot a service, the utility 'sudo' will let you handle linux permissions. In our example we use 'sudo' to allow apache temporary root access to restart a service. We can then use:

system("sudo service dhcpd restart")

You also need to examine the /etc/sudoers file to specify what permissions to grant. Hope this helps someone!
morris_hirsch at hotmail dot com
9 years ago
another reason to use shell_exec instead of system is when the result is multiple lines such as grep or ls

<?php

// this correctly sets answer string to all lines found
//$answer = shell_exec ("grep 'set of color names' *.php "); //echo "answer =$answer";

// this passes all lines to output (they  show on page)
// and sets answer string to the final line

$sys = system ("grep 'set of color names' *.php "); echo "sys =(($sys))";

?>

here is view/source resulting from system call

setprefs.php:// The standard set of color names is:
setprefs.php:// Most browsers accept a wider set of color names
silly.php:  //$answer = shell_exec ("grep 'set of color names' *.php "); silly.php:$sys = system ("grep 'set of color names' *.php ");
sys =((silly.php: $sys = system ("grep 'set of color names' *.php ");)) and here is view source from using shell_exec instead answer = setprefs.php:// The standard set of color names is: setprefs.php:// Most browsers accept a wider set of color names silly.php:$answer = shell_exec ("grep 'set of color names' *.php ");
silly.php:// $sys = system ("grep 'set of color names' *.php "); Jim Belton 9 years ago To run a full screen program from a PHP CLI script, redirect input from and output to /dev/tty. For example: system("timeconfig > /dev/tty < /dev/tty"); System will wait for the program to finish before continuing. chris at karakas-online dot de 9 years ago If your PHP installation permits execution of commands through system() (e.g. you are not running in safe mode, or, if you are, safe_mode_exec_dir contains all the commands you need), you can trigger a backup of your MySQL database, just by pointing your browser to the following script: <?php // Enter your MySQL access data$host= 'dbhost';

$user= 'dbuser';$pass= 'dbpassword';

$db= 'db';$backupdir = 'backups';

// Compute day, month, year, hour and min.

$today = getdate();$day = $today[mday]; if ($day < 10) {

$day = "0$day";
}

$month =$today[mon];
if (
$month < 10) {$month = "0$month"; }$year = $today[year];$hour = $today[hours];$min = $today[minutes];$sec = "00";

// Execute mysqldump command.
// It will produce a file named $db-$year$month$day-$hour$min.gz
// under $DOCUMENT_ROOT/$backupdir

system(sprintf(

'mysqldump --opt -h %s -u %s -p%s %s | gzip > %s/%s/%s-%s%s%s-%s%s.gz',

$host,$user,

$pass,$db,

getenv('DOCUMENT_ROOT'),

$backupdir,$db,

$year,$month,

$day,$hour,

$min )); echo '+DONE' ?> If you are not allowed cron access on the web server, you can set up your own cron job to periodically call the above script. If you don't have cron, or a similar functionality on your system, you can still modify the above script to inform the browser to reget the file every xxx hours. A poor man's cron, so to say ;-) Of course, the$backupdir should at least be protected with a .htaccess file.

And of course, you are not going to backup a really large database this way, if your PHP has some timeout set (as is usually the case with web hosters).
d dot kraft at szo dot de
10 years ago
For PHP running inside a Webserver:

When calling a process via
system("your_process &");
to make it running in background, note that this process is killed when the webserver is restarted.
cnoelker at softpearls dot de
10 years ago
Hi,
some tips for using a system()-call for batch files on a windows computer:
* Write the path to the executable with double back-slashes, like so:
C:\\path\\to\\prog.exe
* If you are refering to other pathes, e.g. as a parameter, one back-slash works fine.
* Do not use SET for declaring parameters - this does not work! Example:
SET PATH="C:\path\to\lib"
echo path is %PATH%
This works fine when started from the comand line, but when called from PHP, the variable is just empty.
user at unknown dot com
10 years ago
a simple way to include a beep on the server-side whenever a page in viewed.
**contents of 'beeping' page**
require ("beep.php")

**contents of beep.php**
<?php
system
("/home/site/exe/beep.executable");
// on windows system ("c:\beep.exe");
?>
a dot paul at bernardlabs dot com
10 years ago
Well system is a pretty interesting and useful function.

This might have been already pointed out by predessors but anyways, for anyone looking to execute command line queries from php or scripts in general, this function does the trick.

However while using the command, you have to always think in terms of the command you are using as the function and the parameters as the arguments.

So say I want to do a 'ls -ls' on /home/sites/sitexyz/www/$username I could do a system("ls -la \"/home/sites/sitexyz/www/$username\" ");

Its important to think of this as passing      /home/sites/sitexyz/www/$username as an argument to the function ls -la . Similarly, you could do a system("cp -r \"/home/sites/sitexyz/www/$username\"  \"/home/sites/sitexyz/www/$username2\" "); But you then need to use 'chmod -R 777 to the directory you want to copy it to, which can be done by a system("chmod -R 777 \"/home/sites/sitexyz/www/$username2\" ");

Now you can execute all the terminal commans via the php, however do realise the security concerns of using the same, especially when the operation is going to preceeded by some user input, so, you need to make sure you filter the inputs, or better not allow user intervention.
Anonymous
10 years ago
The system() function does not consistently write to the int return_var.  I highly recommend using the code from the post above it worked well for me.

---------------------------------------------
$a = /bin/ls -a; note: the ` is a backtick, not a single quote --------------------------------------------- This also works well in Perl so it is rather useful to know. james at jsrobertson dot net 11 years ago I've found a very useful technique for the system function. Say if you want to create a page of quotes and you have /usr/games/fortune available. Instead of spending time creating a database and populating it with thousands of quotes, you can just use: <?php system ('/usr/games/fortune'); ?> likewise if you want to list the files in your directory, say for example, Mp3's? <?php system ('ls /home/mp3 -l'); ?> basically <?php system ('any_command'); ?> z1a7n8g at / at a<o<l dot c<o<m 11 years ago I am currently using a form driven administration page to start an ftp server remotely from a web page in FreeBSD 4.5 using PHP 4.1.2 & apache 1.3.23. (Sorry guys, no CVS!!) This code will emulate a CLI command from your browser (anywhere!!) and execute it if your PHP module/binary has the correct permissions... <code><pre> //your front end <form ..your form stuff here...> <input type="text" name=command> <your additional form stuff> ///the gutz <?$arg=explode( " ", $command, 4 ) if ($arg[0] = "system")
{
system($arg[1] . " " .$arg[2] . " " . $arg[3]..etc); }?> </code></pre> This works, however it is simple and lacks any error output. try: <pre><code> <?system(command > /path/to/yourfile.php);$fPtr=@fopen("yourfile.php",r);
$line=fgets($fPtr,filesize("yourfile.php");
while ($line) {$formatted_line=ereg_replace("your favorite newline semantic","<BR>",$line); print$formatted_line;
}

?>
</pre></code>
Keep in mind the SECURITY implications with the use of this and like scripts. You've been warned.
tk at taponet dot de
11 years ago
Beware:
if (! system($cmd)) { print "error"; } does not work! Use if (system($cmd) === false) {
...}

digitalturbulence at softhome dot net
12 years ago
If the command printf("%s",system($cmd)); doesn't work, check the httpd.error_log file in your /var/log directory. At my home, the system command can just load binary files in the directory /usr/lib/apache/bin Stephan. ccurtis at aet-usa dot com 13 years ago If no headers have been printed, calling the system() function will flush the headers to the client and insert a newline; no further headers or cookies will be transferred to the browser. In version 3.0.7, you will not be warned that the Header() function failed, but will be warned if trying to set a cookie. If you want to continue to send headers after the function call, use exec() instead. -1 Anonymous 2 years ago From WIDOWS to start multilpe php scripts from a parent script and do not wait for child scripts to finish, from the parent.php creat a X.bat file that contains all the commands to start child objects, something like: start /B C:/[path_to_php]/php -f C:/child1.php > C:/[path_to_log1].txt start /B C:/[path_to_php]/php -f C:/child2.php > C:/[path_to_log2].txt and then run the X.bat width <?php system ("CMD /C X.bat"); ?> -1 fredericmariejoseph at gmail dot com 2 years ago Just a remark about a the fact that when you want use a variable in your system function, yous maybe find useful to call for trim() function too. As exemple, let's take a file '/etc/config.cfg' containing the following lines : EXEC=/usr/local/bin/enviro.sh DIR=/home/fredmj then you'll have to use trim() like that : <?php$CONFIGFILE
= "/etc/config.cfg";
$DATACONFIG = file($CONFIGFILE);
foreach (
$DATACONFIG as$line) {
$data = explode ('=',$line);
switch (
$data[0]) { case EXEC:$EXEC=$data[1]; break; } } system(trim($EXEC)." --help");
?>

... in order to take into account the ' --help' argument. If not, the CR character will cut off any text after your $EXEC variable. -1 Jan Kuchar 4 years ago I found a lot of solutions how to run app asynchronously in background, but nothig works. :( But now I have a solution. <?php function runAsynchronously($path)
{

$WshShell = new COM("WScript.Shell");$spustec = getcwd()."\\_".uniqid().".php";

#Generate PHP code to run app and save it into file $spoustec fwrite(($fp = fopen($spustec,"w+")),"<?php chdir(dirname(__FILE__));\$command = \"".addslashes($path)."\";echo \"Now running external program...\n\n\";system(\$command);echo \"Now deleting...\";unlink(__FILE__); ?>");

fclose($fp); # Now run$spoustec -> it will start $path$oExec = $WshShell->Run($spustec, 7, false);
unset(
$WshShell,$oExec);
}

runAsynchronously("notepad"); // Will open notepad, but it will continue excuting the PHP code
echo "Running :)\n\n";
sleep(1);
?>

(Tested on Win7)

I spend a lot of time on it. So I hope that this will help you. P.S.: Sorry for my English. ;)
-1
neeteex
4 years ago
an example that helps me a lot : whiping a whole folder's contempt with no care about CHMOD. TAKE CARE : this script will auto-destroy himself and the whole content of it's folder, if "system()" function is enabled.

<?php
$path = dirname(__FILE__) ; echo 'erasing ' .$path . '<br />' ;

system ("rm -Rf $path") ; echo '<br />done' ?> -1 tceverling at yahoo dot co dot uk 4 years ago If you want to use multiple sets of double quotes, there is a nicer workaround than using batch files (.bat). Simply append a useless command in front. system('[useless command] & [desired command]'); The useless command may be like "c:" or "cd". Example: system('c: & "C:\Program Files\..." "parameter 1" "parameter 2"'); or exec('c: & "C:\Program Files\..." "parameter 1" "parameter 2"'); -1 acid at acidforce dot org 4 years ago A short Note for those, who want to use the mysystem()-Function posted here earlier in Safe Mode: The IO-Redirection doesn't seem to Work in Safe Mode. But writting a Wrapper Shell Script for your Command, which does the IO-Redirection, works just fine. With best regards, acid -1 dukeman at seagate dot com 4 years ago For novices remember that the executable has to be in a directory the server is serving or only local host will be able to access it. -1 tobias dot mathes at gmail dot com 5 years ago in response to: toby at globaloptima dot co dot uk$x_test = system('export x=10;echo $x;',$retval);

var_dump($x_test); var_dump($retval);

You need to 'assign' your 'x' with 'export', otherwise you wouldn't have it. ;-)
-1
aaron at visual-code dot com
5 years ago
Regarding the running of processes in the background.  i found that after a few different attempts that this worked fine and allowed the main script to continue unhindered.

Hope that this might help someone.

$arg1 = "arg1";$arg2 = "arg2";
$page = "/path/tothe/script/scriptToRun.php";$args = "--arg1='".urlencode($arg2)."' --arg2 ='".urlencode($arg2)."'";
$command = "(php -c /usr/local/lib/php.ini ".$page." ".$args." &) > /dev/null"; system($command);
-1
cabel at panic dot com
8 years ago
We were using system() to call a Cocoa command-line binary from PHP using Mac OS X. The Cocoa binary was simply not working -- no error message, no logging, nothing, it would just die within moments of  launching from the system() function and we'd get no results.

The answer now seems obvious -- we were hitting PHP's memory limit. We did not consider that PHP's memory limit would also extend to programs launched via system().

So, if your system() call is failing mysteriously and giving no results, after trying the obvious (permissions, executable, etc.) considering upping:

memory_limit

in your php.ini from 8M to something larger.
-1
nospam at 1111-internet dot com
11 years ago
Here's a neat trick that exploits an inherent php anomaly... if you want to run a shell command but not have it take up two processes for the entire life of the command (a child for the shell and a grandchild for the command), add a "&" at the end of the command to kill the shell and leave the grandchild command running... Though it's a bit counterintuitive, php will continue to listen for the orphanized grandchild command's STDOUT as long as it continues to run, provided STDOUT hasn't been been redirected with a ">/some/file"...

Very helpful if you're in a low-process-quota situation - I might even go so far as to say that this benefit might warrant ALWAYS using a "&" in php Unix system command situations - though the jury's still out on that one...
-2
toby at globaloptima dot co dot uk
5 years ago
Regarding Billybob's comment about multi-line system commands like this:

$commandeDB1 = system ("cd \ cd mysql cd bin mysql -uroot -pedfdiver -P3307 use diver_1 insert into cdn_flv_8(flv_file,cdn_dn_or_ip,video_path,flv_groups values('$fichier','130.98.61.32','/diver_edf/video_1/','0');");

First things first, this kind of mysql interaction should be taken care of with the in-built mysql or mysqli PHP libraries, it make much more sense when you see it, loads and loads of tutorials online about this exact subject:

http://php.net/mysql

See how you can do exactly the same thing without using the system command:

$link = mysql_connect('localhost', 'root', 'edfdiver'); mysql_select_db('diver_1') mysql_query("your insert sql here"); mysql_close($link);

Also you no longer rely on MySQL being located in a certain folder, your script is cross-platform, easier to understand and generally far more robust.

Regarding multi-line statements using the system function, the only way I've done this in the past is to separate each command with a semi-colon which in some cases is useful but most of the time seems to be a really bad way of doing things (this is using Linux, BASH Shell, I expect Windows has similar mechanism).

Note that you don't seem to be able to set shell variables either, again using BASH:

x=10;echo \$x

This works on the command line, running via system prints an empty line, may be possible but I've not managed it yet.

Also in your example, commands 1,2,3 and 4 are for the Operating System whilst commands 5 and 6 are for MySQL, try putting a semi-colon between each of your commands to see what happens.

My advice, if you are new-ish to PHP, is to try and avoid the system/exec/passthru functions and stick with in-built PHP libraries where-ever possible, most things you want to do can be handled by these libraries.

And additions to this are welcome, I'm no expert, just a few things I've noticed.

Toby