pcntl_sigwaitinfo
Oops, I stripped just a little much from the job daemon code in the previous comment. You'll want to add a little line before the ->launchJob() method is called:
<?php
while(count($this->currentJobs) >= $this->maxProcesses){
echo "Maximum children allowed, waiting...\n";
sleep(1);
}
pcntl_wait
(PHP 5)
pcntl_wait — Çatallanmış bir çocuğun durum kodu için bekler
Açıklama
int pcntl_wait
( int
&$durum
[, int $seçenekler = 0
] )Bir çocuk süreç çıkana veya sonlandırıcı bir sinyal alana ya da bir sinyal eylemcisi çağrılana kadar çalışmakta olan sürecin çalışmasını askıya alır. Bir çocuk zaten çıkmışsa (yani bir zombi süreçse) işlev beklemeden döner. Çocuk sürecin kullandığı sistem özkaynakları serbest bırakılır. Sisteminizde waitpid'in nasıl çalıştığı hakkında ayrıntılı bilgi edinmek için waitpid(2) kılavuz sayfasına bakınız.
Bilginize:
seçeneklerdeğiştirgesi olmadan,piddeğiştirgesinde -1 belirterek bir pcntl_waitpid() çağrısı yapmaya denktir.
Değiştirgeler
-
durum -
pcntl_wait() işlevi
durumdeğiştirgesinde durum bilgisini şu işlevler ile değerendirilmek üzere saklar: pcntl_wifexited(), pcntl_wifstopped(), pcntl_wifsignaled(), pcntl_wexitstatus(), pcntl_wtermsig() ve pcntl_wstopsig(). -
seçenekler -
Sisteminizde wait3 kullanılabiliyorsa (geneldde BSD sistemlerinde bulunur) isteğe bağlı olan
seçeneklerdeğişirgesini kullanabilirsiniz. Aksi takdirde bu değiştirgede belirtilen seçeneklerin hiçbir etkisi olmayacaktır. Değiştirgenin değeri aşağıdaki küresel sabitlerin bitsel VEYAlanmışıdır:Olası seçeneklerWNOHANG Çıkmış çocuk süreç yoksa hemen dön. WUNTRACED Durumu raporlanmamış ve durmuş çocuklar varsa dön.
Dönen Değerler
Çocuk süreç çıkmışsa süreç kimliği, hata oluşmuşsa -1,
(wait3 bulunan sistemlerde) WNOHANG kullanılmış ama
ortada bir çocuk süreç yoksa 0 ile döner.
Ayrıca Bakınız
- pcntl_fork() - Çalışan süreci çatallar
- pcntl_signal() - Bir sinyal eylemci belirtir
- pcntl_wifexited() - Durum kodunun normal bir çıkışı mı işaret ettiğine bakar
- pcntl_wifstopped() - Çocuk sürecin durmuş olup olmadığına bakar
- pcntl_wifsignaled() - Durum kodunun bir sinyal sebebiyle bir sonlanmayı mı işaret ettiğine bakar
- pcntl_wexitstatus() - Sonlanmış çocuk sürecin dönüş kodunu döndürür
- pcntl_wtermsig() - Çocuk sürecin sonlanmasına sebep olan sinyali döndürür
- pcntl_wstopsig() - Çocuk sürecin durmasına sebep olan sinyali döndürür
- pcntl_waitpid() - Bir çocuk sürecin çıkmasını bekler ve durum kodunu döndürür
add a note
User Contributed Notes
pcntl_wait
duerra at yahoo dot com
01-Jul-2010 07:12
duerra at yahoo dot com
01-Jul-2010 06:45
Using pcntl_fork() can be a little tricky in some situations. For fast jobs, a child can finish processing before the parent process has executed some code related to the launching of the process. The parent can receive a signal before it's ready to handle the child process' status. To handle this scenario, I add an id to a "queue" of processes in the signal handler that need to be cleaned up if the parent process is not yet ready to handle them.
<?php
declare(ticks=1);
//A very basic job daemon that you can extend to your needs.
class JobDaemon{
public $maxProcesses = 25;
protected $jobsStarted = 0;
protected $currentJobs = array();
protected $signalQueue=array();
protected $parentPID;
public function __construct(){
echo "constructed \n";
$this->parentPID = getmypid();
pcntl_signal(SIGCHLD, array($this, "childSignalHandler"));
}
/**
* Run the Daemon
*/
public function run(){
echo "Running \n";
for($i=0; $i<10000; $i++){
$jobID = rand(0,10000000000000);
$launched = $this->launchJob($jobID);
}
//Wait for child processes to finish before exiting here
while(count($this->currentJobs)){
echo "Waiting for current jobs to finish... \n";
sleep(1);
}
}
/**
* Launch a job from the job queue
*/
protected function launchJob($jobID){
$pid = pcntl_fork();
if($pid == -1){
//Problem launching the job
error_log('Could not launch new job, exiting');
return false;
}
else if ($pid){
// Parent process
// Sometimes you can receive a signal to the childSignalHandler function before this code executes if
// the child script executes quickly enough!
//
$this->currentJobs[$pid] = $jobID;
// In the event that a signal for this pid was caught before we get here, it will be in our signalQueue array
// So let's go ahead and process it now as if we'd just received the signal
if(isset($this->signalQueue[$pid])){
echo "found $pid in the signal queue, processing it now \n";
$this->childSignalHandler(SIGCHLD, $pid, $this->signalQueue[$pid]);
unset($this->signalQueue[$pid]);
}
}
else{
//Forked child, do your deeds....
$exitStatus = 0; //Error code if you need to or whatever
echo "Doing something fun in pid ".getmypid()."\n";
exit($exitStatus);
}
return true;
}
public function childSignalHandler($signo, $pid=null, $status=null){
//If no pid is provided, that means we're getting the signal from the system. Let's figure out
//which child process ended
if(!$pid){
$pid = pcntl_waitpid(-1, $status, WNOHANG);
}
//Make sure we get all of the exited children
while($pid > 0){
if($pid && isset($this->currentJobs[$pid])){
$exitCode = pcntl_wexitstatus($status);
if($exitCode != 0){
echo "$pid exited with status ".$exitCode."\n";
}
unset($this->currentJobs[$pid]);
}
else if($pid){
//Oh no, our job has finished before this parent process could even note that it had been launched!
//Let's make note of it and handle it when the parent process is ready for it
echo "..... Adding $pid to the signal queue ..... \n";
$this->signalQueue[$pid] = $status;
}
$pid = pcntl_waitpid(-1, $status, WNOHANG);
}
return true;
}
}
digitalaudiorock at gmail dot com
21-Jun-2010 02:44
I was unable to get pcntl_wait or pcntl_waitpid to terminate when I had an active signal handler. I then noticed the post below from gaylord at 100days dot de, however I'm a little confused by that post as I found the exact opposite to be true. The default value of the third parameter of pcntl_signal (the restart_syscalls parameter) is true and this seems to cause the wait to continue when the signal arrives. In order to prevent this I had to expressly set it to false. That is:
pcntl_signal(SIGTERM, 'my_handler_function', false);
gaylord at 100days dot de
16-Jun-2010 05:17
pcntl_wait will not terminate on signals if you have a PHP signal handler activated (pcntl_signal).
This is unless the signal handler was activated with 3rd parameter=true.
Example:
<?php
declare(ticks=1);
pcntl_signal(SIGTERM, "myHandler");
$pid=pcntl_wait($status);
?>
This will not terminate on SIGTERM sent to the process, because "wait" will be restarted after php recieves the signal. The signal handler "myHandler" will not be called unless pcntl_wait terminates for some other reason.
Change to:
<?php
declare(ticks=1);
pcntl_signal(SIGTERM, "myHandler", true);
$pid=pcntl_wait($status);
?>
Now the pcntl_wait terminates when a signal comes in and "myHandler" will be called on SIGTERM. (Make sure to put the wait in a loop though, because it will now not only terminate when a child exits but also when a signal arrives. Test for $pid>0 to detect a exit message from a child)
(thanks to Andrey for helping me debugging this)
thomas dot nicolai at unisg dot ch
24-Mar-2006 11:19
The code before isnt working for me cause the children are correctly started but not refreshed after they died. So keep in mind to use this instead and use the signal handler to know when a child exits to know when you have to start a new one. I added a few lines to the posting from {andy at cbeyond dot net} cause his post wasnt working for me as well (PHP5.1). Same effect like the one below.
<?php
declare(ticks = 1);
$max=5;
$child=0;
// function for signal handler
function sig_handler($signo) {
global $child;
switch ($signo) {
case SIGCHLD:
echo "SIGCHLD received\n";
$child--;
}
}
// install signal handler for dead kids
pcntl_signal(SIGCHLD, "sig_handler");
while (1){
$child++;
$pid=pcntl_fork();
if ($pid == -1) {
die("could not fork");
} else if ($pid) {
// we are the parent
if ( $child >= $max ){
pcntl_wait($status);
$child++;
}
} else {
// we are the child
echo "\t Starting new child | now we de have $child child processes\n";
// presumably doing something interesting
sleep(rand(3,5));
exit;
}
}
?>
federico at nextware dot it
19-Feb-2006 04:39
This a simple multi process application where you can choose
the maximun process that can run at the same time.
This is useful when you need to limit the fork of process.
When the MAXPROCESS is reached the program wait on pcntl_wait()
<?php
DEFINE(MAXPROCESS,25);
for ($i=0;$i<100;$i++){
$pid = pcntl_fork();
if ($pid == -1) {
die("could not fork");
} elseif ($pid) {
echo "I'm the Parent $i\n";
$execute++;
if ($execute>=MAXPROCESS){
pcntl_wait($status);
$execute--;
}
} else {
echo "I am the child, $i pid = $pid \n";
sleep(rand(1,3));
echo "Bye Bye from $i\n";
exit;
}
}
?>
thisisroot at gmail dot com
19-Oct-2005 07:14
Below is a simple example of forking some children and timing the total duration (useful for stress tests).
<?php
$isParent = true;
$children = array();
$start = microtime( true);
/* Fork you!
* (Sorry, I had to)
*/
$ceiling = $CONCURRENCY - 1;
for ( $i = 0; (( $i < $ceiling) && ( $isParent)); $i++) {
$pid = pcntl_fork();
if ( $pid === 0) {
$isParent = false;
} elseif ( $pid != -1) {
$children[] = $pid;
}
}
/* Process body */
echo "Do stuff here\n";
/* Cleanup */
if ( $isParent) {
$status = null;
while ( count( $children)) {
pcntl_wait( $status);
array_pop( $children);
}
echo "Completed in " . ( microtime( true) - $start) . " seconds.\n";
}
?>