International PHP Conference Berlin 2025

extract

(PHP 4, PHP 5, PHP 7, PHP 8)

extractImporta le variabili nella tabella dei simboli corrente da un array

Descrizione

extract(array &$array, int $flags = EXTR_OVERWRITE, string $prefix = ""): int

Importa le variabili nella tabella dei simboli corrente da un array.

Controlla ogni chiave per vedere se ha un nome di variabile valido. Controlla anche le collisioni con le variabili esistenti nella tabella dei simboli.

Avviso

Non usare extract() su dati non attendibili, come l'input dell'utente (per esempio $_GET, $_FILES).

Elenco dei parametri

array

Un array associativo. Questa funzione tratta le chiavi come nomi di variabili e i valori come valori di variabili. Per ogni coppia chiave/valore verrà creata una variabile nella tabella dei simboli corrente, soggetta ai parametri flags e prefix.

È necessario utilizzare un array associativo; un array indicizzato numericamente non produrrà risultati a meno che non si utilizzi EXTR_PREFIX_ALL o EXTR_PREFIX_INVALID.

flags

Il modo in cui vengono trattate le chiavi non valide/numeriche e le collisioni è determinato dai flag di estrazione. Può essere uno dei seguenti valori:

EXTR_OVERWRITE
In caso di collisione, sovrascrivi la variabile esistente.
EXTR_SKIP
In caso di collisione, non sovrascrivere la variabile esistente.
EXTR_PREFIX_SAME
In caso di collisione, anteporre al nome della variabile il prefisso prefix.
EXTR_PREFIX_ALL
Prefissa tutti i nomi delle variabili con prefix.
EXTR_PREFIX_INVALID
Aggiunge il prefisso prefix solo ai nomi di variabili non valide/numeriche.
EXTR_IF_EXISTS
Sovrascrive la variabile solo se esiste già nella tabella dei simboli corrente, altrimenti non fa nulla. Questo è utile per definire un elenco di variabili valide e quindi estrarre solo quelle variabili che sono state definite in $_REQUEST, per esempio.
EXTR_PREFIX_IF_EXISTS
Crea nomi di variabili con prefisso solo se la versione senza prefisso della stessa variabile esiste nella tabella dei simboli corrente.
EXTR_REFS
Estrae le variabili come riferimenti. Ciò significa effettivamente che i valori delle variabili importate fanno ancora riferimento ai valori del parametro array. Si può usare questo flag da solo o combinarlo con qualsiasi altro flag utilizzando l'OR dei flags.

Se flags non è specificato, si presume che sia EXTR_OVERWRITE.

prefix

Notare che prefix è richiesto solo se flags è EXTR_PREFIX_SAME, EXTR_PREFIX_ALL, EXTR_PREFIX_INVALID o EXTR_PREFIX_IF_EXISTS. Se il risultato con prefisso non è un nome di variabile valido, non viene importato nella tabella dei simboli. I prefissi vengono separati automaticamente dalla chiave dell'array da un carattere underscore.

Valori restituiti

Restituisce il numero di variabili importate con successo nella tabella dei simboli.

Esempi

Example #1 Esempio di extract()

Un possibile utilizzo di extract() è importare nella tabella dei simboli le variabili contenute in un array associativo restituito da wddx_deserialize().

<?php

/* Si supponga che $var_array sia un array restituito da
wddx_deserialize */

$size = "grande";
$array_variabili = array("color" => "blu",
"size" => "media",
"shape" => "sfera");
extract($array_variabili, EXTR_PREFIX_SAME, "wddx");

echo
"$color, $size, $shape, $wddx_size\n";

?>

Il precedente esempio visualizzerà:

blu, grande, sfera, media

$size non è stato sovrascritto perché abbiamo specificato EXTR_PREFIX_SAME, che ha portato alla creazione di $wddx_size. Se fosse stato specificato EXTR_SKIP, allora $wddx_size non sarebbe nemmeno stato creato. EXTR_OVERWRITE avrebbe fatto sì che $size avesse il valore "medio" e EXTR_PREFIX_ALL avrebbe comportato nuove variabili con nomi $wddx_color, $wddx_size e $wddx_shape.

Note

Avviso

Non utilizzare extract() su dati non attendibili, come l'input dell'utente (per esempio $_GET, $_FILES, ecc.). In tal caso, assicurarsi di utilizzare uno dei valori di flags che non sovrascrivono come EXTR_SKIP e tenere presente che si dovrebbe estrarre nello stesso ordine definito in variables_order all'interno del php.ini.

Vedere anche:

  • compact() - Crea un array contenente variabili e il loro valore
  • list() - Assegna valori a delle variabili come se fossero un array

add a note

User Contributed Notes 28 notes

up
20
Michael Newton
19 years ago
They say "If the result is not a valid variable name, it is not imported into the symbol table."

What they should say is that if _any_ of the results have invalid names, _none_ of the variables get extracted.

Under 4.3.10 on Windows 2000, I was pulling some mySQL records, but needed to convert two fields into IP addresses:
<?
extract(mysql_fetch_assoc(mysql_query('SELECT * FROM foo')));
extract(mysql_fetch_assoc(mysql_query('SELECT INET_NTOA(bar) AS bar, INET_NTOA(baz) FROM foo')));
?>

I had forgotten the second AS modifier in the SQL query. Because it couldn't extract a variable called INET_NTOA(baz) into the symbol table, it didn't do either of them.

(BTW I don't normally stack functions up like that! Just to make a short example!)
up
10
FredLawl
11 years ago
It is possible to use this as a way to create public attributes for a class.

<?php
class Foo {

public function
__construct ($array) {

extract($array, EXTR_REFS);
foreach (
$array as $key => $value) {
$this->$key = $$key;
// Do: $this->key = $key; if $key is not a string.
}

}

}

$array = array(
'valueOne' => 'Test Value 1',
'valueTwo' => 'Test Value 2',
'valueThree' => 'Test Value 3'
);

$foo = new Foo($array);

// Works
echo $foo->valueOne; // Test Value 1
echo $foo->valueTwo; // Test Value 2

// Does not work!
echo $foo::$valueOne; // Fatal error: Access to undeclared static property: Test::$valueOne
?>
up
6
Csaba at alum dot mit dot edu
19 years ago
Sometimes you may want to extract only a named subset of the key/value pairs in an array. This keeps things more orderly and could prevent an unrelated variable from getting clobbered from an errant key. For example,

$things = 'unsaid';
$REQUEST = array(He=>This, said=>1, my=>is, info=>2, had=>a,
very=>3, important=>test, things=>4);
$aVarToExtract = array(my, important, info);
extract (array_intersect_key ($REQUEST, array_flip($aVarToExtract)));

will extract
$my = 'is';
$important = 'test';
$info = 2;

but will leave certain
$things = 'unsaid'

Csaba Gabor from Vienna
NB. Of course the composite request coming in from a web page is in $_REQUEST.
up
10
dmikam
10 years ago
I have made some tests to compare the speed of next constructions:
<?php

extract
($ARRAY);

// vs.

foreach($ARRAY as $key=>$value)
$
$key = $value;
?>

Surprisingly for me extract is 20%-80% slower then foreach construction. I don't really understand why, but it's so.
up
8
Robc
13 years ago
When extracting from a row after a database query using for example:

$row = mysql_fetch_array($result, MYSQL_ASSOC)
extract($row);

I find that the resultant variables may not match the variable type in the database. In particular I have found integers in the database may gettype() to string on the extracted variable.
up
6
Dan O'Donnell
17 years ago
Following up on ktwombley at gmail dot com's post:

Presumably one easy way of dealing with this security issue is to use the EXTR_IF_EXISTS flag and make sure

a) your define acceptable input variables beforehand (i.e. as empty variables)
b) Sanitise any user input to avoid unacceptable variable content.

If you do these two things, then I'm not sure I see the difference between extract($_REQUEST,EXTR_IF_EXISTS); and assigning each of the variables by hand.

I'm not talking here about the idea of storing the variables in a database, just the immediately necessary steps to allow you to use extract on REQUEST arrays with relative safety.
up
8
CertaiN
10 years ago
[New Version]

Example Usage:
<?php
$_GET
['A']['a'] = ' CORRECT(including some spaces) ';
$_GET['A']['b'] = ' CORRECT(including some spaces) ';
$_GET['A']['c'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['A']['d']['invalid_structure'] = 'INVALID';

$_GET['B']['a'] = ' CORRECT(including some spaces) ';
$_GET['B']['b'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['B']['c']['invalid_structure'] = 'INVALID';
$_GET['B']["Invalid UTF-8 sequence: \xe3\xe3\xe3"] = 'INVALID';

$_GET['C']['a'] = ' CORRECT(including some spaces) ';
$_GET['C']['b'] = "Invalid UTF-8 sequence: \xe3\xe3\xe3";
$_GET['C']['c']['invalid_structure'] = 'INVALID';
$_GET['C']["Invalid UTF-8 sequence: \xe3\xe3\xe3"] = 'INVALID';

$_GET['unneeded_item'] = 'UNNEEDED';

var_dump(filter_struct_utf8(INPUT_GET, array(
'A' => array(
'a' => '',
'b' => FILTER_STRUCT_TRIM,
'c' => '',
'd' => '',
),
'B' => FILTER_STRUCT_FORCE_ARRAY,
'C' => FILTER_STRUCT_FORCE_ARRAY | FILTER_STRUCT_TRIM,
)));
?>

Example Result:
array(3) {
["A"]=>
array(4) {
["a"]=>
string(36) " CORRECT(including some spaces) "
["b"]=>
string(30) "CORRECT(including some spaces)"
["c"]=>
string(0) ""
["d"]=>
string(0) ""
}
["B"]=>
array(3) {
["a"]=>
string(36) " CORRECT(including some spaces) "
["b"]=>
string(0) ""
["c"]=>
string(0) ""
}
["C"]=>
array(3) {
["a"]=>
string(30) "CORRECT(including some spaces)"
["b"]=>
string(0) ""
["c"]=>
string(0) ""
}
}
up
2
amolocaleb at gmail dot com
6 years ago
If an object is typecasted into an array and "extracted",only the public properties will be accessible.Methods are of course omitted.
<?php
class Test{
public
$name = '';

protected
$age = 10;

public
$status = 'disabled';

private
$isTrue = false;

public function
__construct()
{
$this->name = 'Amolo';
$this->status = 'active';
}

public function
getName()
{
return
$this->name;
}

public function
getAge()
{
return
$this->age;
}

public function
getStatus()
{
return
$this->status;
}

}

$obj = (array) new Test();
var_dump($obj);
/* array(4) { ["name"]=> string(5) "Amolo" ["*age"]=> int(10) ["status"]=> string(6) "active" ["TestisTrue"]=> bool(false) } */
extract((array)new Test());
echo
$name; //Amolo
echo $status; //active
echo $age;//Notice: Undefined variable: age
echo $isTrue;//Notice: Undefined variable: isTrue
up
3
phatsk+php at gmail dot com
6 years ago
Using extract's return parameter can lead to unintended results, particularly with EXTR_REFS:

<?php

$my_data
= [
'count' => 15,
'name' => 'foo',
];

$count = extract( $my_data, EXTR_REFS );

echo
$my_data['count']; // 2, not 15.
up
7
dotslash.lu at gmail.com
11 years ago
You can't extract a numeric indexed array(e.g. non-assoc array).
<?php
$a
= array(
1,
2
);
extract($a);
var_dump(${1});
?>

result:
PHP Notice: Undefined variable: 1 in /Users/Lutashi/t.php on line 7

Notice: Undefined variable: 1 in /Users/Lutashi/t.php on line 7
NULL
up
4
mrkhoa99 at gmail dot com
6 years ago
We can use extract () function for Template Engine:

<?php
#Template.php

class Template
{
protected
$viewVars;

public function
renderPage($tpl)
{
ob_start();
extract($this->viewVars, EXTR_SKIP);
include
$tpl;
return
ob_end_flush();
}

public function
assign($arr)
{
foreach (
$arr as $key => $value) {
$this->viewVars[$key] = $value;
}
return
$this;
}
}

$template = new Template();
$template->assign(
[
'pageHeader' => 'Page Header', 'content' => 'This is the content page']
);
$template->renderPage('tpl.php');

#tpl.php

<h1><?= $pageHeader; ?></h1>
<p><?= $content ;?></p>

Output:

Page Header
This is the content page
up
6
CertaiN
10 years ago
[New Version]
This function is very useful for filtering complicated array structure.
Also, Some integer bitmasks and invalid UTF-8 sequence detection are available.

Code:
<?php
/**
* @param integer $type Constant like INPUT_XXX.
* @param array $default Default structure of the specified super global var.
* Following bitmasks are available:
* + FILTER_STRUCT_FORCE_ARRAY - Force 1 dimensional array.
* + FILTER_STRUCT_TRIM - Trim by ASCII control chars.
* + FILTER_STRUCT_FULL_TRIM - Trim by ASCII control chars,
* full-width and no-break space.
* @return array The value of the filtered super global var.
*/
define('FILTER_STRUCT_FORCE_ARRAY', 1);
define('FILTER_STRUCT_TRIM', 2);
define('FILTER_STRUCT_FULL_TRIM', 4);
function
filter_struct_utf8($type, array $default) {
static
$func = __FUNCTION__;
static
$trim = "[\\x0-\x20\x7f]";
static
$ftrim = "[\\x0-\x20\x7f\xc2\xa0\xe3\x80\x80]";
static
$recursive_static = false;
if (!
$recursive = $recursive_static) {
$types = array(
INPUT_GET => $_GET,
INPUT_POST => $_POST,
INPUT_COOKIE => $_COOKIE,
INPUT_REQUEST => $_REQUEST,
);
if (!isset(
$types[(int)$type])) {
throw new
LogicException('unknown super global var type');
}
$var = $types[(int)$type];
$recursive_static = true;
} else {
$var = $type;
}
$ret = array();
foreach (
$default as $key => $value) {
if (
$is_int = is_int($value)) {
if (!(
$value | (
FILTER_STRUCT_FORCE_ARRAY |
FILTER_STRUCT_FULL_TRIM |
FILTER_STRUCT_TRIM
))) {
$recursive_static = false;
throw new
LogicException('unknown bitmask');
}
if (
$value & FILTER_STRUCT_FORCE_ARRAY) {
$tmp = array();
if (isset(
$var[$key])) {
foreach ((array)
$var[$key] as $k => $v) {
if (!
preg_match('//u', $k)){
continue;
}
$value &= FILTER_STRUCT_FULL_TRIM | FILTER_STRUCT_TRIM;
$tmp += array($k => $value ? $value : '');
}
}
$value = $tmp;
}
}
if (
$isset = isset($var[$key]) and is_array($value)) {
$ret[$key] = $func($var[$key], $value);
} elseif (!
$isset || is_array($var[$key])) {
$ret[$key] = null;
} elseif (
$is_int && $value & FILTER_STRUCT_FULL_TRIM) {
$ret[$key] = preg_replace("/\A{$ftrim}++|{$ftrim}++\z/u", '', $var[$key]);
} elseif (
$is_int && $value & FILTER_STRUCT_TRIM) {
$ret[$key] = preg_replace("/\A{$trim}++|{$trim}++\z/u", '', $var[$key]);
} else {
$ret[$key] = preg_replace('//u', '', $var[$key]);
}
if (
$ret[$key] === null) {
$ret[$key] = $is_int ? '' : $value;
}
}
if (!
$recursive) {
$recursive_static = false;
}
return
$ret;
}
?>
up
4
nicolas zeh
18 years ago
This function provides exactly the same functionality as extract except that a parameter was added defining the extract target.
This function can be used if your PHP installation does not support the required Flags or more important if you would like to extract arrays to another destination as to $GLOBALS, i.e. other arrays or objects.
The only difference to extract is that extract_to moves the array pointer of $arr to the end as $arr is passed by reference to support the EXTR_REFS flag.

<?php
if( !defined('EXTR_PREFIX_ALL') ) define('EXTR_PREFIX_ALL', 3);
if( !
defined('EXTR_PREFIX_INVALID') ) define('EXTR_PREFIX_INVALID', 4);
if( !
defined('EXTR_IF_EXISTS') ) define('EXTR_IF_EXISTS', 5);
if( !
defined('EXTR_PREFIX_IF_EXISTS') ) define('EXTR_PREFIX_IF_EXISTS', 6);
if( !
defined('EXTR_REFS') ) define('EXTR_REFS', 256);


function
extract_to( &$arr, &$to, $type=EXTR_OVERWRITE, $prefix=false ){

if( !
is_array( $arr ) ) return trigger_error("extract_to(): First argument should be an array", E_USER_WARNING );

if(
is_array( $to ) ) $t=0;
else if(
is_object( $to ) ) $t=1;
else return
trigger_error("extract_to(): Second argument should be an array or object", E_USER_WARNING );

if(
$type==EXTR_PREFIX_SAME || $type==EXTR_PREFIX_ALL || $type==EXTR_PREFIX_INVALID || $type==EXTR_PREFIX_IF_EXISTS )
if(
$prefix===false ) return trigger_error("extract_to(): Prefix expected to be specified", E_USER_WARNING );
else
$prefix .= '_';

$i=0;
foreach(
$arr as $key=>$val ){

$nkey = $key;
$isset = $t==1 ? isset( $to[$key] ) : isset( $to->$key );

if( (
$type==EXTR_SKIP && $isset )
|| (
$type==EXTR_IF_EXISTS && !$isset ) )
continue;

else if( (
$type==EXTR_PREFIX_SAME && $isset )
|| (
$type==EXTR_PREFIX_ALL )
|| (
$type==EXTR_PREFIX_INVALID && !preg_match( '#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $key ) ) )
$nkey = $prefix.$key;

else if(
$type==EXTR_PREFIX_IF_EXISTS )
if(
$isset ) $nkey = $prefix.$key;
else continue;

if( !
preg_match( '#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $nkey ) ) continue;

if(
$t==1 )
if(
$type & EXTR_REFS ) $to->$nkey = &$arr[$key];
else
$to->$nkey = $val;
else
if(
$type & EXTR_REFS ) $to[$nkey] = &$arr[$key];
else
$to[$nkey] = $val;

$i++;
}

return
$i;
}

// e.g.:
extract_to( $myarray, $myobject, EXTR_IF_EXISTS );
?>
up
3
benjaminATwebbutvecklarnaDOTse
16 years ago
Re: anon at anon dot org, about extract() and null values

Personally I've found use extracting multiple resultsets from db where the latter would overwrite the previous when a variable is not null ( and optionally if its not >0 )

It would be useful if $extract_type was extended on top of these two:

EXTR_OVERWRITE
EXTR_SKIP

with something like this:

EXTR_OVERWRITE_NULL
- If there is a collision, overwrite the existing variable if it is null

EXTR_OVERWRITE_0
- Same thing but == 0 or null

EXTR_SKIP_NULL
- If there is a collision, skip the new variable if the existing is not null

EXTR_SKIP_0
- Same thing but == 0 or null

Those ought to cover a few good cases that aren't covered now.
up
4
bob
9 years ago
Note that extract() will only create or overwrite variables in the current scope, so
<?
function test(){
$a=Array('b'=>1,'c'=>2);
extract($a);
}
test();
exit("$b");
?>
will produce no output, whereas
<?
function test(){
global $b;
$a=Array('b'=>1,'c'=>2);
extract($a);
}
test();
exit("$b");
?>
will output 1.
up
1
Hayley Watson
16 years ago
Dan O'Donnell's suggestion needs a third requirement to work as described:

c) No other variables are defined - especially variables that contain potentially sensitive information.

Without that condition the difference between extract() and assigning variables by hand (and the resulting security implications) should be obvious.

The only valid security step there is (b) - but you should be doing that anyway.
up
1
owk dot ch199_ph at gadz dot org
18 years ago
And if you want with PHP 5 an easy way to extract $V by reference, try this :
<?php
foreach ($V as $k => &$v) {
$
$k =& $v;
}
?>
It can be used to create special kind of "free args" functions that let you choose when you call them the way you send variables, and which ones. They are moreover very fast to call thanks to references :
<?php
function free_args (&$V) {
foreach (
$V as $k => &$v) {
$
$k =& $v;
}
unset (
$k); unset ($v); unset ($V);

// be careful that if you need to extract $k, $v or $V variables you should find other names for them in the lines above (ie. $__k, $__v and $__V)
}

$huge_text = '...';

$a = array ('arg1' => 'val1', 'arg2' => &$huge_text); // in this call, only $arg2 will be a true reference in the function
free_args ($a);
?>
Be warned that you can't write : "<?php free_args (array ('arg1' => 'val1')); ?>" because the array can't be referenced by the function, as it's not yet created when the function starts.
up
4
ktwombley at gmail dot com
18 years ago
It's really easy to open gaping security holes using extract() on $_REQUEST, $_GET, etc. You have to be really sure of what you're doing, and use the proper flags on extract() to avoid clobbering important variables.

For instance, the submission by kake26 at gmail dot com will not only perfectly emulate register globals (that's bad), but it'll store it in a database and recall the same variables every time the script runs (essentially allowing an attacker to attack your script every time it runs via one attack). Oops!

To fix it, you'd have to get creative with flags. Maybe you could use EXTR_PREFIX_ALL instead of EXTR_OVERWRITE, for example. Of course, you should also sanitize the form elements to ensure there's no php code in them, and also to make sure any very important variables aren't in the form data. (like the classic $is_admin = true attack)
up
2
Adam Monsen <adamm at wazamatta dot com>
20 years ago
As shown in the example, if your 'prefix' is used, a single underscore is added to the name of the extracted variable. Meaning, a prefix of 'p' becomes a prefix of 'p_', so 'blarg' prefixed would be 'p_blarg'.

If you're not sure what variables you've created through extraction, you can call get_defined_vars() to see all defined variables in the current scope.
up
2
Anonymous
19 years ago
To make this perfectly clear (hopefully), an underscore is always added when the string is prefixed.
extract(array("color" => "blue"),EXTR_PREFIX_ALL,'');// note: prefix is empty
is the same as
$color='_blue';
up
2
Dutchdavey
17 years ago
I would draw your attention to the user note at the very end of this page regarding PREFIXES. The user points out that php adds a '_' to your prefixes.
up
1
anon at anon dot org
19 years ago
A warning about extract() and null values.

This might be an actual Zend2 Engine bug, but it's bad programming practice, so I'm sharing it here instead.

I often work in envrionments where E_STRICT (which would prevent errors like this) isn't on, and I don't have access to change it. I also use a very simple template class that in a nutshell works like this:

$t = new Template('somefile.php');
$t->title = $title;
$t->body = $body;
$t->display();

display() more or less looks like this:

function display(){
extract(get_object_vars($this),EXTR_REFS);
ob_start(); include $this->templateFileName;
return ob_get_clean();
}

If any of the assigned values are null (let's say that in this case $title wasn't initialized above) it causes the engine to do all sorts of incredibly whacky stuff like certifiably lose track of variables in an incredibly inconsistent way. I traced the problem down to the fact that it's using the EXTR_REFS flag. I assume that in PHP's internal variable storage or reference counting mechanism, that trying to extract null references makes it lose track or count of something or rather.

In a nutshell, if you start getting wierd behavior when using extract() make sure that the array or object you are trying to get variables out of doesn't contain null keys or values!
up
0
auto493097 at hushmail dot com
14 years ago
I use XDebug with NetbeansIDE to for analyzing and developing PHP Code. When debugging an extract statement no new variables appeared in the variable's list. Although all variables created by extract could be examined by explicit watch items and single variables appeared as soon as an PHP script makes use of them I am not sure weather it is a wrong configuration, a feature or a bug in XDebug.
up
0
Aaron Stone
20 years ago
If you are working porting an older application, and taking the advice above, extracting only _SERVER, _SESSING, _COOKIE, _POST, _GET, you have forgotten to extract _FILES. Putting _FILES last and using EXTR_SKIP doesn't work because the name of the file upload box is already set as a variable containing only the temporary name of the uploaded file from one of the earlier extracts (I haven't tested to see which one specifically, however). A workaround is to put _FILES last and use EXTR_OVERWRITE. This allows extract to replace that temp-name-only variable with the full array of file upload information.
up
-1
darrenforster99 at gmail dot com
3 years ago
In response to Dan O'Donnell's note:

"Presumably one easy way of dealing with this security issue is to use the EXTR_IF_EXISTS flag and make sure"

Not necessarily - even using the EXTR_IF_EXISTS flag could be extremely dangerous - imagine this code running...

<?php

global $sql ;

function
runSql ()
{
$result = $conn->query($sql);
$conn-> close();
return
$result;
}

function
extractGet ()
{
$name = '' ;
$address = '' ;
foreach (
$_GET as $key => $value )
$_GET[$key] = urldecode ( $value ) ;
extract($_GET,EXTR_IF_EXISTS);
$sql = str_replace ( '{NAME}', $name, $sql ) ;
$sql = str_replace ( '{ADDRESS}', $address, $sql ) ;
}

function
outputResult ( $res )
{
echo
'<pre>'.print_r ( $res->fetch_array(MYSQLI_NUM) ).'</pre>' ;
}

$sql = 'SELECT postcode FROM Customers WHERE name={NAME} AND address={ADDRESS}';
extractGet () ;
$res = runSql () ;
outputResult ( $res ) ;
?>

Now can you see a massive security issue here...

seems all well and good if we had a url like

mycode.php?name=joe%20bloggs&address=20%20Any%20Street

as that would specifically find joe bloggs of 20 any street.

however what if someone typed in

mycode.php?sql=SELECT%20password%20FROM%20Customers

or even worse

mycode.php?sql=DELETE%20from%20Customers

The problem here is that even though as far as you're aware you defined both name and address as the only two empty variables within that function - you may have forgotten about global variables, and these global variables could cause major security issues

In the example above $sql is defined as "SELECT postcode FROM Customers WHERE name={NAME} AND address={ADDRESS}" which seems all well and good, and safe, and then later on str_replace in the extractGet function replaces {NAME} and {ADDRESS} with the name and address variables from $_GET - but if GET contains an SQL variable then that would overwrite the global $sql variable before the str_replace function - and if the str_replace function finds no matches it just returns the original string - in the above two examples the SQL string would be "SELECT password FROM Customers" which in the example outputResult just prints the data retrieved from the database and so in this stage it could print all the customers passwords (hopefully encrypted!) to the screen (oops!) or in the second example the SQL string would be "DELETE from Customers" - with no WHERE clause that would delete all the data from the Customers table and of course a combination of

SELECT table_name FROM information_schema.tables

and

DROP TABLE <table_name>

could be a real disaster!

Of course, this is only a basic example, but it could be quite easy to forget about global variables and these global variables could quite easily be used with extract to cause serious security risks if GET, REQUEST or POST is sent to extract!
up
-2
pg dot perfection at gmail dot com
19 years ago
Here is a little example of how an extraction method should look like when it needs to work recursive (work on nested_arrays too)...

Note that this is only an example, it can be done more easily, and more advanced too.

<?php
/**
* A nested version of the extract () function.
*
* @param array $array The array which to extract the variables from
* @param int $type The type to use to overwrite (follows the same as extract () on PHP 5.0.3
* @param string $prefix The prefix to be used for a variable when necessary
*/
function extract_nested (&$array, $type = EXTR_OVERWRITE, $prefix = '')
{
/**
* Is the array really an array?
*/
if (!is_array ($array))
{
return
trigger_error ('extract_nested (): First argument should be an array', E_USER_WARNING);
}

/**
* If the prefix is set, check if the prefix matches an acceptable regex pattern
* (the one used for variables)
*/
if (!empty ($prefix) && !preg_match ('#^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$#', $prefix))
{
return
trigger_error ('extract_nested (): Third argument should start with a letter or an underscore', E_USER_WARNING);
}

/**
* Check if a prefix is necessary. If so and it is empty return an error.
*/
if (($type == EXTR_PREFIX_SAME || $type == EXTR_PREFIX_ALL || $type == EXTR_PREFIX_IF_EXISTS) && empty ($prefix))
{
return
trigger_error ('extract_nested (): Prefix expected to be specified', E_USER_WARNING);
}

/**
* Make sure the prefix is oke
*/
$prefix = $prefix . '_';

/**
* Loop thru the array
*/
foreach ($array as $key => $val)
{
/**
* If the key isn't an array extract it as we need to do
*/
if (!is_array ($array[$key]))
{
switch (
$type)
{
default:
case
EXTR_OVERWRITE:
$GLOBALS[$key] = $val;
break;
case
EXTR_SKIP:
$GLOBALS[$key] = isset ($GLOBALS[$key]) ? $GLOBALS[$key] : $val;
break;
case
EXTR_PREFIX_SAME:
if (isset (
$GLOBALS[$key]))
{
$GLOBALS[$prefix . $key] = $val;
}
else
{
$GLOBALS[$key] = $val;
}
break;
case
EXTR_PREFIX_ALL:
$GLOBALS[$prefix . $key] = $val;
break;
case
EXTR_PREFIX_INVALID:
if (!
preg_match ('#^[a-zA-Z_\x7f-\xff]$#', $key{0}))
{
$GLOBALS[$prefix . $key] = $val;
}
else
{
$GLOBALS[$key] = $val;
}
break;
case
EXTR_IF_EXISTS:
if (isset (
$GLOBALS[$key]))
{
$GLOBALS[$key] = $val;
}
break;
case
EXTR_PREFIX_IF_EXISTS:
if (isset (
$GLOBALS[$key]))
{
$GLOBALS[$prefix . $key] = $val;
}
break;
case
EXTR_REFS:
$GLOBALS[$key] =& $array[$key];
break;
}
}
/**
* The key is an array... use the function on that index
*/
else
{
extract_nested ($array[$key], $type, $prefix);
}
}
}
?>
up
-4
danbettles at yahoo dot co dot uk
15 years ago
When using EXTR_PREFIX_ALL - and probably all the other EXTR_PREFIX_* constants - and a numerically-indexed array, extract() will add an underscore ("_") between the prefix and the index.

<?php

extract
(array('foo', 'bar'), EXTR_PREFIX_ALL, 'var');

print_r(get_defined_vars()); // Reveals $var_0 = 'foo' and $var_1 = 'bar'
?>
up
-5
moslehi<atsign>gmail<d0t>c0m
18 years ago
Experimentally I found that calling extract() also shows the number of keys if the key is set and is not numeric ! Maybe there was a better definition than mine . Please have a look to this scripts :

<?PHP
$var
["i"] = "a";
$var["j"] = "b";
$var["k"] = 1;
echo
extract($var); // returns 3
?>

<?PHP
$var2
["i"] = "a";
$var2[2] = "b";
$var2[] = 1;
echo
extract($var2); // returns 1
?>

(Arash Moslehi)
To Top