LaravelConf Taiwan 2020 CFP Started

imagefilter

(PHP 5, PHP 7)

imagefilterApplies a filter to an image

Beschreibung

imagefilter ( resource $image , int $filtertype [, int $arg1 [, int $arg2 [, int $arg3 [, int $arg4 ]]]] ) : bool

imagefilter() applies the given filter filtertype on the image.

Parameter-Liste

image

Eine von den verschiedenen Erzeugungsfunktionen wie imagecreatetruecolor() gelieferte Grafikressource.

filtertype

filtertype can be one of the following:

  • IMG_FILTER_NEGATE: Reverses all colors of the image.
  • IMG_FILTER_GRAYSCALE: Converts the image into grayscale by changing the red, green and blue components to their weighted sum using the same coefficients as the REC.601 luma (Y') calculation. The alpha components are retained. For palette images the result may differ due to palette limitations.
  • IMG_FILTER_BRIGHTNESS: Changes the brightness of the image. Use arg1 to set the level of brightness. The range for the brightness is -255 to 255.
  • IMG_FILTER_CONTRAST: Changes the contrast of the image. Use arg1 to set the level of contrast.
  • IMG_FILTER_COLORIZE: Like IMG_FILTER_GRAYSCALE, except you can specify the color. Use arg1, arg2 and arg3 in the form of red, green, blue and arg4 for the alpha channel. The range for each color is 0 to 255.
  • IMG_FILTER_EDGEDETECT: Uses edge detection to highlight the edges in the image.
  • IMG_FILTER_EMBOSS: Embosses the image.
  • IMG_FILTER_GAUSSIAN_BLUR: Blurs the image using the Gaussian method.
  • IMG_FILTER_SELECTIVE_BLUR: Blurs the image.
  • IMG_FILTER_MEAN_REMOVAL: Uses mean removal to achieve a "sketchy" effect.
  • IMG_FILTER_SMOOTH: Makes the image smoother. Use arg1 to set the level of smoothness.
  • IMG_FILTER_PIXELATE: Applies pixelation effect to the image, use arg1 to set the block size and arg2 to set the pixelation effect mode.
  • IMG_FILTER_SCATTER: Applies scatter effect to the image, use arg1 and arg2 to define the effect strength and additionally arg3 to only apply the on select pixel colors.

arg1

  • IMG_FILTER_BRIGHTNESS: Brightness level.
  • IMG_FILTER_CONTRAST: Contrast level.
  • IMG_FILTER_COLORIZE: Wert der Rotkomponente.
  • IMG_FILTER_SMOOTH: Smoothness level.
  • IMG_FILTER_PIXELATE: Block size in pixels.
  • IMG_FILTER_SCATTER: Effect substraction level. This must not be higher or equal to the addition level set with arg2.

arg2

  • IMG_FILTER_COLORIZE: Wert der Grünkomponente.
  • IMG_FILTER_PIXELATE: Whether to use advanced pixelation effect or not (defaults to FALSE).
  • IMG_FILTER_SCATTER: Effect addition level.

arg3

  • IMG_FILTER_COLORIZE: Wert der Blaukomponente.
  • IMG_FILTER_SCATTER: Optional array indexed color values to apply effect at.

arg4

  • IMG_FILTER_COLORIZE: Alpha channel, A value between 0 and 127. 0 indicates completely opaque while 127 indicates completely transparent.

Rückgabewerte

Gibt bei Erfolg TRUE zurück. Im Fehlerfall wird FALSE zurückgegeben.

Changelog

Version Beschreibung
7.4.0 Scatter support (IMG_FILTER_SCATTER) was added.
5.3.0 Pixelation support (IMG_FILTER_PIXELATE) was added.
5.2.5 Alpha support for IMG_FILTER_COLORIZE was added.

Beispiele

Beispiel #1 imagefilter() grayscale example

<?php
$im 
imagecreatefrompng('dave.png');

if(
$im && imagefilter($imIMG_FILTER_GRAYSCALE))
{
    echo 
'Image converted to grayscale.';

    
imagepng($im'dave.png');
}
else
{
    echo 
'Conversion to grayscale failed.';
}

imagedestroy($im);
?>

Beispiel #2 imagefilter() brightness example

<?php
$im 
imagecreatefrompng('sean.png');

if(
$im && imagefilter($imIMG_FILTER_BRIGHTNESS20))
{
    echo 
'Image brightness changed.';

    
imagepng($im'sean.png');
    
imagedestroy($im);
}
else
{
    echo 
'Image brightness change failed.';
}
?>

Beispiel #3 imagefilter() colorize example

<?php
$im 
imagecreatefrompng('philip.png');

/* R, G, B, so 0, 255, 0 is green */
if($im && imagefilter($imIMG_FILTER_COLORIZE02550))
{
    echo 
'Image successfully shaded green.';

    
imagepng($im'philip.png');
    
imagedestroy($im);
}
else
{
    echo 
'Green shading failed.';
}
?>

Beispiel #4 imagefilter() negate example

<?php
// Define our negate function so its portable for 
// php versions without imagefilter()
function negate($im)
{
    if(
function_exists('imagefilter'))
    {
        return 
imagefilter($imIMG_FILTER_NEGATE);
    }

    for(
$x 0$x imagesx($im); ++$x)
    {
        for(
$y 0$y imagesy($im); ++$y)
        {
            
$index imagecolorat($im$x$y);
            
$rgb imagecolorsforindex($index);
            
$color imagecolorallocate($im255 $rgb['red'], 255 $rgb['green'], 255 $rgb['blue']);

            
imagesetpixel($im$x$y$color);
        }
    }

    return(
true);
}

$im imagecreatefromjpeg('kalle.jpg');

if(
$im && negate($im))
{
    echo 
'Image successfully converted to negative colors.';

    
imagejpeg($im'kalle.jpg'100);
    
imagedestroy($im);
}
else
{
    echo 
'Converting to negative colors failed.';
}
?>

Beispiel #5 imagefilter() pixelate example

<?php
// Load the PHP logo, we need to create two instances 
// to show the differences
$logo1 imagecreatefrompng('./php.png');
$logo2 imagecreatefrompng('./php.png');

// Create the image instance we want to show the 
// differences on
$output imagecreatetruecolor(imagesx($logo1) * 2imagesy($logo1));

// Apply pixelation to each instance, with a block 
// size of 3
imagefilter($logo1IMG_FILTER_PIXELATE3);
imagefilter($logo2IMG_FILTER_PIXELATE3true);

// Merge the differences onto the output image
imagecopy($output$logo10000imagesx($logo1) - 1imagesy($logo1) - 1);
imagecopy($output$logo2imagesx($logo2), 000imagesx($logo2) - 1imagesy($logo2) - 1);
imagedestroy($logo1);
imagedestroy($logo2);

// Output the differences
header('Content-Type: image/png');
imagepng($output);
imagedestroy($output);
?>

Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

Output of example : imagefilter() pixelate

Beispiel #6 imagefilter() scatter example

<?php
// Load the image
$logo imagecreatefrompng('./php.png');

// Apply a very soft scatter effect to the image
imagefilter($logoIMG_FILTER_SCATTER35);

// Output the image with the scatter effect
header('Content-Type: image/png');
imagepng($logo);
imagedestroy($logo);
?>

Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

Output of example : imagefilter() scatter

Anmerkungen

Hinweis: The result of IMG_FILTER_SCATTER is always random.

Siehe auch

add a note add a note

User Contributed Notes

There are no user contributed notes for this page.
To Top