Simple key white-list filter:
<?php
$arr = array('a' => 123, 'b' => 213, 'c' => 321);
$allowed = array('b', 'c');
print_r(array_intersect_key($arr, array_flip($allowed)));
?>
Will return:
Array
(
[b] => 213
[c] => 321
)
(PHP 5 >= 5.1.0, PHP 7, PHP 8)
array_intersect_key — Calcula la intersección de dos arrays utilizando las claves para la comparación
array_intersect_key() devuelve un array que contiene
todas las entradas del array array
que contienen claves presentes en todos los arrays pasados como argumentos.
arrayEl array que contiene las claves maestras a verificar.
arraysArrays a comparar.
Devuelve un array asociativo que contiene todas las entradas del
array array cuyas claves están presentes
en todos los argumentos.
| Versión | Descripción |
|---|---|
| 8.0.0 | Esta función ahora puede ser llamada con un solo parámetro. Anteriormente, se requerían al menos dos parámetros. |
Ejemplo #1 Ejemplo con array_intersect_key()
<?php
$array1 = array('azul' => 1, 'rojo' => 2, 'verde' => 3, 'violeta' => 4);
$array2 = array('verde' => 5, 'azul' => 6, 'amarillo' => 7, 'cian' => 8);
var_dump(array_intersect_key($array1, $array2));
?>El resultado del ejemplo sería:
array(2) {
["azul"]=>
int(1)
["verde"]=>
int(3)
}
En este ejemplo, se puede ver que solo las claves 'azul'
y 'verde' están presentes en ambos arrays y por lo tanto,
son devueltas. Note también que los valores para las claves
'azul' y 'verde' difieren
entre los dos arrays. No obstante, aún corresponden porque
solo las claves son verificadas.
Los valores devueltos son los del array array1.
Las dos claves desde los pares clave => valor
son consideradas iguales solo si
(string) $clave1 === (string) $clave2 . En otras palabras,
se realiza un análisis estricto del tipo, por lo que la representación en forma de
string debe ser exactamente la misma.
Simple key white-list filter:
<?php
$arr = array('a' => 123, 'b' => 213, 'c' => 321);
$allowed = array('b', 'c');
print_r(array_intersect_key($arr, array_flip($allowed)));
?>
Will return:
Array
(
[b] => 213
[c] => 321
)Note that the order of the keys in the returned array is the same as the order of the keys in the source array.
To sort by the second array, then you may do so through array_replace.
<?php
$array = array(
'two' => 'a',
'three' => 'b',
'one' => 'c',
);
$keyswant = array(
'one' => '',
'three' => '',
);
print_r(array_intersect_key(array_replace($keyswant, $array), $keyswant));
?>
Shows:
Array
(
[one] => c
[three] => b
)
Rather than:
Array
(
[three] => b
[one] => c
)[Editor's note: changed array_merge_recursive() to array_replace_recursive() to fix the script]
Here is a better way to merge settings using some defaults as a whitelist.
<?php
$defaults = [
'id' => 123456,
'client_id' => null,
'client_secret' => null,
'options' => [
'trusted' => false,
'active' => false
]
];
$options = [
'client_id' => 789,
'client_secret' => '5ebe2294ecd0e0f08eab7690d2a6ee69',
'client_password' => '5f4dcc3b5aa765d61d8327deb882cf99', // ignored
'client_name' => 'IGNORED', // ignored
'options' => [
'active' => true
]
];
var_dump(
array_replace_recursive($defaults,
array_intersect_key(
$options, $defaults
)
)
);
?>
Output:
array (size=4)
'id' => int 123456
'client_id' => int 789
'client_secret' => string '5ebe2294ecd0e0f08eab7690d2a6ee69' (length=32)
'options' =>
array (size=2)
'trusted' => boolean false
'active' => boolean trueNote that the order of the keys in the returned array is the same as the order of the keys in the source array. eg:
<?php
$array = array(
'two' => 'a',
'three' => 'b',
'one' => 'c',
);
$keyswant = array(
'one' => '',
'three' => '',
);
print_r(array_intersect_key($array, $keyswant));
?>
Shows:
Array
(
[three] => b
[one] => c
)If you want an array that has no key value pairs added from the second array:
$new = array_intersect_key($b, $a) + $a;I have found the following helpful:
<?PHP
function array_merge_default($default, $data) {
$intersect = array_intersect_key($data, $default); //Get data for which a default exists
$diff = array_diff_key($default, $data); //Get defaults which are not present in data
return $diff + $intersect; //Arrays have different keys, return the union of the two
}
?>
It's use is like both of the functions it uses, but keeps defaults and _only_ defaults. It's designed for key arrays, and i'm not sure how it will work on numeric indexed arrays.
Example:
<?PHP
$default = array(
"one" => 1,
"two" => 2
);
$untrusted = array(
"one" => 42,
"three" => 3
);
var_dump(array_merge_default($default, $untrusted));
array(2) {
["two"]=>
int(2)
["one"]=>
int(42)
}
?>Jesse: no, array_intersect_key does not accomplish the same thing as what you posted:
array_flip (array_intersect (array_flip ($a), array_flip ($b)))
because when the array is flipped, values become keys. having duplicate values is not a problem, but having duplicate keys is. array_flip resolves it by keeping only one of the duplicates and discarding the rest. by the time you start intersecting, you've already lost information.Regarding php at keithtylerdotcom solution to emulate
<?php
$z = someFuncReturningAnArray()['some_key'];
?>
His recommended solution will still return an array. To get the value of a single key in an array returned by a function, simply add implode() to the recipe:
<?php
function someFuncReturningAnArray() {
return array(
'a' => 'b',
'c' => 'd',
'e' => 'f',
'g' => 'h',
'i' => 'j'
);
}
//traditional way
$temp = someFuncReturningAnArray();
$b = $temp['a'];
echo print_r($b, 1) . "\n----------\n";
//keithtylerdotcom one-line method
$b = array_intersect_key(someFuncReturningAnArray(), array('a'=>''));
echo print_r($b, 1) . "\n----------\n";
//better one line method
$b = implode('', array_intersect_key(someFuncReturningAnArray(), array('a'=>'')));
echo print_r($b, 1) . "\n----------\n";
?>May I suggest this array_intersect_key_recursive implementation ?
function array_intersect_key_recursive(array $targetArray, array ...$comparedArrays): array
{
$targetArrayIntersected = array_intersect_key($targetArray, ...$comparedArrays);
foreach (array_keys($targetArrayIntersected) as $key) {
if (true === is_array($targetArray[$key])
// all compared arrays have key with non-empty array as value
&& true === array_reduce(
$comparedArrays,
function (bool $isArrayPreviousSingleComparedArray, array $singleComparedArray) use ($key) {
return (true === $isArrayPreviousSingleComparedArray
&& true === is_array($singleComparedArray[$key])
&& false === empty($singleComparedArray[$key])
);
},
true)
)
{
// repeat recursively
$targetArrayIntersected[$key] = array_intersect_key_recursive(
$targetArray[$key],
...array_map(
function(array $singleComparedArray) use ($key): array {
return $singleComparedArray[$key];
},
$comparedArrays
)
);
}
}
return $targetArrayIntersected;
}<?php
/**
* calculates intersection of two arrays like array_intersect_key but recursive
*
* @param array/mixed master array
* @param array array that has the keys which should be kept in the master array
* @return array/mixed cleand master array
*/
function myIntersect($master, $mask) {
if (!is_array($master)) { return $master; }
foreach ($master as $k=>$v) {
if (!isset($mask[$k])) { unset ($master[$k]); continue; } // remove value from $master if the key is not present in $mask
if (is_array($mask[$k])) { $master[$k] = $this->myIntersect($master[$k], $mask[$k]); } // recurse when mask is an array
// else simply keep value
}
return $master;
}
?>in case you came here looking for a function that returns an array containing the values of `all` arrays with intersecting keys:
<?php
function array_merge_on_key($key, $array1, $array2) {
$arrays = array_slice(func_get_args(), 1);
$r = array();
foreach($arrays as &$a) {
if(array_key_exists($key, $a)) {
$r[] = $a[$key];
continue;
}
}
return $r;
}
// example:
$array1 = array("id" => 12, "name" => "Karl");
$array2 = array("id" => 4, "name" => "Franz");
$array3 = array("id" => 9, "name" => "Helmut");
$array4 = array("id" => 10, "name" => "Kurt");
$result = array_merge_on_key("id", $array1, $array2, $array3, $array4);
echo implode(",", $result); // => 12,4,9,10
?>Just a simple script if you want to use one array, which contains only zeros and ones, as mask for another one (both arrays must have the same size of course). $outcome is an array that contains only those values from $source where $mask is equal to 1.
<?php
$outcome = array_values(array_intersect_key( array_values($source), array_filter(array_values($mask)) ));
?>
PS: the array_values() function is necessary to ensure that both arrays have the same numbering/keys, otherwise your masking does not behave as you expect.
Enjoy!