PHP 8.3.4 Released!

Funciones de Arrays

Ver también

Ver también is_array(), explode(), implode(), split(), preg_split(), and unset().

Tabla de contenidos

  • array_change_key_case — Cambia a mayúsculas o minúsculas todas las claves en un array
  • array_chunk — Divide un array en fragmentos
  • array_column — Devuelve los valores de una sola columna del array de entrada
  • array_combine — Crea un nuevo array, usando una matriz para las claves y otra para sus valores
  • array_count_values — Cuenta todos los valores de un array
  • array_diff_assoc — Calcula la diferencia entre arrays con un chequeo adicional de índices
  • array_diff_key — Calcula la diferencia entre arrays empleando las claves para la comparación
  • array_diff_uassoc — Calcula la diferencia entre arrays con un chequeo adicional de índices que se realiza por una función de devolución de llamada suministrada por el usuario
  • array_diff_ukey — Calcula la diferencia entre arrays usando una función de devolución de llamada en las keys para comparación
  • array_diff — Calcula la diferencia entre arrays
  • array_fill_keys — Llena un array con valores, especificando las keys
  • array_fill — Llena un array con valores
  • array_filter — Filtra elementos de un array usando una función de devolución de llamada
  • array_flip — Intercambia todas las claves de un array con sus valores asociados
  • array_intersect_assoc — Calcula la intersección de arrays con un chequeo adicional de índices
  • array_intersect_key — Calcula la intersección de arrays usando sus claves para la comparación
  • array_intersect_uassoc — Calcula la intersección de arrays con una comprobación adicional de índices, los cuales se comparan con una función de retrollamada
  • array_intersect_ukey — Calcula la intersección de arrays usando una función de devolución de llamada en las claves para la comparación
  • array_intersect — Calcula la intersección de arrays
  • array_is_list — Checks whether a given array is a list
  • array_key_exists — Verifica si el índice o clave dada existe en el array
  • array_key_first — Obtiene la primera clave de un array
  • array_key_last — Obtiene la última clave de un array
  • array_keys — Devuelve todas las claves de un array o un subconjunto de claves de un array
  • array_map — Aplica la retrollamada a los elementos de los arrays dados
  • array_merge_recursive — Une dos o más arrays recursivamente
  • array_merge — Combina dos o más arrays
  • array_multisort — Ordena varios arrays, o arrays multidimensionales
  • array_pad — Rellena un array a la longitud especificada con un valor
  • array_pop — Extrae el último elemento del final del array
  • array_product — Calcula el producto de los valores de un array
  • array_push — Inserta uno o más elementos al final de un array
  • array_rand — Seleccionar una o más claves aleatorias de un array
  • array_reduce — Reduce iterativamente un array a un solo valor usando una función llamada de retorno
  • array_replace_recursive — Reemplaza los elementos de los arrays pasados al primer array de forma recursiva
  • array_replace — Reemplaza los elementos del array original con elementos de array adicionales
  • array_reverse — Devuelve un array con los elementos en orden inverso
  • array_search — Busca un valor determinado en un array y devuelve la primera clave correspondiente en caso de éxito
  • array_shift — Quita un elemento del principio del array
  • array_slice — Extraer una parte de un array
  • array_splice — Elimina una porción del array y la reemplaza con otra cosa
  • array_sum — Calcular la suma de los valores de un array
  • array_udiff_assoc — Computa la diferencia entre arrays con una comprobación de indices adicional, compara la información mediante una función de llamada de retorno
  • array_udiff_uassoc — Computa la diferencia entre arrays con una verificación de índices adicional, compara la información y los índices mediante una función de llamada de retorno
  • array_udiff — Computa la diferencia entre arrays, usando una llamada de retorno para la comparación de datos
  • array_uintersect_assoc — Calcula la intersección de arrays con una comprobación de índices adicional, compara la información mediante una función de retrollamada
  • array_uintersect_uassoc — Calcula la intersección de arrays con una comprobación de índices adicional, compara la información y los índices mediante funciones de retrollamada por separado
  • array_uintersect — Computa una intersección de arrays, compara la información mediante una función de llamada de retorno
  • array_unique — Elimina valores duplicados de un array
  • array_unshift — Añadir al inicio de un array uno a más elementos
  • array_values — Devuelve todos los valores de un array
  • array_walk_recursive — Aplicar una función de usuario recursivamente a cada miembro de un array
  • array_walk — Aplicar una función proporcionada por el usuario a cada miembro de un array
  • array — Crea un array
  • arsort — Ordena un array en orden inverso y mantiene la asociación de índices
  • asort — Ordena un array y mantiene la asociación de índices
  • compact — Crear un array que contiene variables y sus valores
  • count — Cuenta todos los elementos de un array o algo de un objeto
  • current — Devuelve el elemento actual en un array
  • each — Devolver el par clave/valor actual de un array y avanzar el cursor del array
  • end — Establece el puntero interno de un array a su último elemento
  • extract — Importar variables a la tabla de símbolos actual desde un array
  • in_array — Comprueba si un valor existe en un array
  • key_exists — Alias de array_key_exists
  • key — Obtiene una clave de un array
  • krsort — Ordena un array por clave en orden inverso
  • ksort — Ordena un array por clave
  • list — Asignar variables como si fueran un array
  • natcasesort — Ordenar un array usando un algoritmo de "orden natural" insensible a mayúsculas-minúsculas
  • natsort — Ordena un array usando un algoritmo de "orden natural"
  • next — Avanza el puntero interno de un array
  • pos — Alias de current
  • prev — Rebobina el puntero interno del array
  • range — Crear un array que contiene un rango de elementos
  • reset — Establece el puntero interno de un array a su primer elemento
  • rsort — Ordena un array en orden inverso
  • shuffle — Mezcla un array
  • sizeof — Alias de count
  • sort — Ordena un array
  • uasort — Ordena un array con una función de comparación definida por el usuario y mantiene la asociación de índices
  • uksort — Ordena un array según sus claves usando una función de comparación definida por el usuario
  • usort — Ordena un array según sus valores usando una función de comparación definida por el usuario
add a note

User Contributed Notes 13 notes

up
18
permanovd at gmail dot com
5 years ago
A simple trick that can help you to guess what diff/intersect or sort function does by name.

[suffix] assoc - additional index check. Compares both value and index.

Example: array_diff_assoc, array_intersect_assoc.

[suffix] key - index only check. Ignores value of array, compares only indexes.

Example: array_diff_key, array_intersect_key.

[suffix] **empty** - no "key" or "assoc" word in suffix. Compares values only. Ignores indexes of array.

Example: array_diff, array_intersect.

[prefix] u - will do comparison with user defined function. Letter u can be used twice in some functions (like array_udiff_uassoc), this means that you have to use 2 functions (one for value, one for index).

Example: array_udiff_uassoc, array_uintersect_assoc.

This also works with array sort functions:

[prefix] a - associative. Will preserve keys.

Example: arsort, asort.

[prefix] k - key sort. Will sort array by keys.

Example: uksort, ksort.

[prefix] r - reverse. Will sort array in reverse order.

Example: rsort, krsort.

[prefix] u - sort by user defined function (same as for diff/intersect).

Example: usort, uasort.
up
2
renatonascto at gmail dot com
15 years ago
Big arrays use a lot of memory possibly resulting in memory limit errors. You can reduce memory usage on your script by destroying them as soon as you´re done with them. I was able to get over a few megabytes of memory by simply destroying some variables I didn´t use anymore.
You can view the memory usage/gain by using the funcion memory_get_usage(). Hope this helps!
up
-3
indioeuropeo at driverop dot com
4 years ago
I need to take an element from the Array and change its position within the Array by moving the rest of the elements as required.
This is the function that does it. The first parameter is the working Array. The second is the position of the element to move and the third is the position where to move the element.
The function returns the modified Array.
<?php
function array_move_elem($array, $from, $to) {
if (
$from == $to) { return $array; }
$c = count($array);
if ((
$c > $from) and ($c > $to)) {
if (
$from < $to) {
$f = $array[$from];
for (
$i = $from; $i < $to; $i++) {
$array[$i] = $array[$i+1];
}
$array[$to] = $f;
} else {
$f = $array[$from];
for (
$i = $from; $i > $to; $i--) {
$array[$i] = $array[$i-1];
}
$array[$to] = $f;
}

}
return
$array;
}

?>
Examples:
<?php
$array
= array('Cero','Uno','Dos','Tres','Cuatro','Cinco','Seis','Siete','Ocho','Nueve','Diez');
$array = array_move_elem($array, 3, 5); // Move element in position 3 to position 5...
print_r($array);

$array = array_move_elem($array, 5, 3); // Move element in position 5 to position 3, leaving array as it was... ;)
print_r($array);

?>
Return:
<?php
Array ( [0] => Cero [1] => Uno [2] => Dos [3] => Cuatro [4] => Cinco [5] => Tres [6] => Seis [7] => Siete [8] => Ocho [9] => Nueve [10] => Diez )
Array ( [
0] => Cero [1] => Uno [2] => Dos [3] => Tres [4] => Cuatro [5] => Cinco [6] => Seis [7] => Siete [8] => Ocho [9] => Nueve [10] => Diez )
?>
up
-13
nicoolasens at gmail dot com
8 years ago
/*to change an index without rewriting the whole table and leave at the same place.
*/
<?php
function change_index(&$tableau, $old_key, $new_key) {
$changed = FALSE;
$temp = 0;
foreach (
$tableau as $key => $value) {
switch (
$changed) {
case
FALSE :
//creates the new key and deletes the old
if ($key == $old_key) {
$tableau[$new_key] = $tableau[$old_key];
unset(
$tableau[$old_key]);
$changed = TRUE;
}
break;

case
TRUE :
//moves following keys
if ($key != $new_key){
$temp= $tableau[$key];
unset(
$tableau[$key]);
$tableau[$key] = $temp;
break;
}
else {
$changed = FALSE;} //stop
}
}
array_values($tableau); //free_memory
}

//Result :
$tableau = array(1, 2 , 3, 4,5, 6, 7, 8, 9, 10);
$res = print_r($tableau, TRUE);
$longueur = strlen($res) -1;
echo
"Old array :\n" . substr($res, 8, $longueur) . "\n" ;

change_index ($tableau, 2, 'number 2');
$res = print_r($tableau, TRUE);
$longueur = strlen($res) -10;
echo
"New array :\n" . substr($res, 8, $longueur) . "\n" ;

/*
Old array :
[0] => 1
[1] => 2
[2] => 3
[3] => 4
[4] => 5
[5] => 6
[6] => 7
[7] => 8
[8] => 9
[9] => 10
)

New array :
[0] => 1
[1] => 2
[numéro 2] => 3
[3] => 4
[4] => 5
[5] => 6
[6] => 7
[7] => 8
[8] => 9
[9] => 10
*/
?>
up
-15
info at hotkey404 dot com
3 years ago
Updated code of 'indioeuropeo' with option to input string-based keys.

INPUT:
array(4) {
["a"]=>
string(5) "Apple"
["b"]=>
string(6) "Banana"
["c"]=>
string(3) "Cat"
["d"]=>
string(3) "Dog"
}

OUTPUT:
array(4) {
["a"]=>
string(5) "Apple"
["d"]=>
string(3) "Dog"
["b"]=>
string(6) "Banana"
["c"]=>
string(3) "Cat"
}

FUNCTION:
<?php
function array_move_elem($array, $from, $to){
// return if non-numeric couldn't be found or from=to
if(!is_numeric($from)){
if(
array_search($from, array_keys($array))!==FALSE){
$from = array_search($from, array_keys($array));
}else{
return
$array;
}
}
$array_numeric_keys = array();
foreach(
$array as $k => $v){
$array_numeric_keys[] = $k;
}
if (
$from == $to) { return $array; }
$c = count($array_numeric_keys);
if ((
$c > $from) and ($c > $to)) {
if (
$from < $to) {
$f = $array_numeric_keys[$from];
for (
$i = $from; $i < $to; $i++) {
$array_numeric_keys[$i] = $array_numeric_keys[$i+1];
}
$array_numeric_keys[$to] = $f;
} else {
$f = $array_numeric_keys[$from];
for (
$i = $from; $i > $to; $i--) {
$array_numeric_keys[$i] = $array_numeric_keys[$i-1];
}
$array_numeric_keys[$to] = $f;
}

}
$array_new = array();
foreach(
$array_numeric_keys as $v){
$array_new[$v] = $array[$v];
}
return
$array_new;
}
?>
up
-20
ob at babcom dot biz
17 years ago
Here is a function to find out the maximum depth of a multidimensional array.

<?php
// return depth of given array
// if Array is a string ArrayDepth() will return 0
// usage: int ArrayDepth(array Array)

function ArrayDepth($Array,$DepthCount=-1,$DepthArray=array()) {
$DepthCount++;
if (
is_array($Array))
foreach (
$Array as $Key => $Value)
$DepthArray[]=ArrayDepth($Value,$DepthCount);
else
return
$DepthCount;
foreach(
$DepthArray as $Value)
$Depth=$Value>$Depth?$Value:$Depth;
return
$Depth;
}
?>
up
-27
kolkabes at googlemail dot com
11 years ago
Short function for making a recursive array copy while cloning objects on the way.

<?php
function arrayCopy( array $array ) {
$result = array();
foreach(
$array as $key => $val ) {
if(
is_array( $val ) ) {
$result[$key] = arrayCopy( $val );
} elseif (
is_object( $val ) ) {
$result[$key] = clone $val;
} else {
$result[$key] = $val;
}
}
return
$result;
}
?>
up
-15
DamianKaelGreen at gmail dot com
6 years ago
While there are a lot of array functions in the PHP libs, there also seem to be a lot of rudimentary ones missing.

I went ahead and created several of my own functions for handling multiple non-associative (na) arrays including:

na_array_merge
na_array_intersect
na_array_diff
na_array_xnor
na_array_xor

If you are using Venn diagrams to think about your arrays, then these functions might be for you.

I have made them available and posted documentation for them here: https://www.greendingle.com/some-useful-non-associative-array-functions/
up
-26
dave at davidhbrown dot us
12 years ago
While PHP has well over three-score array functions, array_rotate is strangely missing as of PHP 5.3. Searching online offered several solutions, but the ones I found have defects such as inefficiently looping through the array or ignoring keys.

The following array_rotate() function uses array_merge and array_shift to reliably rotate an array forwards or backwards, preserving keys. If you know you can trust your $array to be an array and $shift to be between 0 and the length of your array, you can skip the function definition and use just the return expression in your code.

<?php
function array_rotate($array, $shift) {
if(!
is_array($array) || !is_numeric($shift)) {
if(!
is_array($array)) error_log(__FUNCTION__.' expects first argument to be array; '.gettype($array).' received.');
if(!
is_numeric($shift)) error_log(__FUNCTION__.' expects second argument to be numeric; '.gettype($shift)." `$shift` received.");
return
$array;
}
$shift %= count($array); //we won't try to shift more than one array length
if($shift < 0) $shift += count($array);//handle negative shifts as positive
return array_merge(array_slice($array, $shift, NULL, true), array_slice($array, 0, $shift, true));
}
?>
A few simple tests:
<?php
$array
=array("foo"=>1,"bar"=>2,"baz"=>3,4,5);

print_r(array_rotate($array, 2));
print_r(array_rotate($array, -2));
print_r(array_rotate($array, count($array)));
print_r(array_rotate($array, "4"));
print_r(array_rotate($array, -9));
?>
up
-24
Ewan
7 years ago
I was looking for an array aggregation function here and ended up writing this one.

Note: This implementation assumes that none of the fields you're aggregating on contain The '@' symbol.

<?php
function array_group_by($flds, $arr) {
$groups = array();
foreach (
$arr as $rec) {
$keys = array_map(function($f) use($rec) { return $rec[$f]; }, $flds);
$k = implode('@', $keys);
if (isset(
$groups[$k])) {
$groups[$k][] = $rec;
} else {
$groups[$k] = array($rec);
}
}
return
$groups;
}

?>
up
-26
oliverSPAMMENOT at e-geek dot com dot au
13 years ago
Function to pretty print arrays and objects. Detects object recursion and allows setting a maximum depth. Based on arraytostring and u_print_r from the print_r function notes. Should be called like so:

<?php
egvaluetostring
($value) //no max depth, or
egvaluetostring($value, $max_depth) //max depth set

function egvaluetostring($value, $max_depth, $key = NULL, $depth = 0, $refChain = array()) {
if(
$depth > 0)
$tab = str_repeat("\t", $depth);
$text .= $tab . ($key !== NULL ? $key . " => " : "");

if (
is_array($value) || is_object($value)) {
$recursion = FALSE;
if (
is_object($value)) {
foreach (
$refChain as $refVal) {
if (
$refVal === $value) {
$recursion = TRUE;
break;
}
}
array_push($refChain, $value);
}

$text .= (is_array($value) ? "array" : "object") . " ( ";

if (
$recursion) {
$text .= "*RECURSION* ";
}
elseif (isset(
$max_depth) && $depth >= $max_depth) {
$text .= "*MAX DEPTH REACHED* ";
}
else {
if (!empty(
$value)) {
$text .= "\n";
foreach (
$value as $child_key => $child_value) {
$text .= egvaluetostring($child_value, $max_depth, (is_array($value) ? "[" : "") . $child_key . (is_array($value) ? "]" : ""), $depth+1, $refChain) . ",\n";
}
$text .= "\n" . $tab;
}
}

$text .= ")";

if (
is_object($value)) {
array_pop($refChain);
}
}
else {
$text .= "$value";
}

return
$text;
}
?>
up
-27
mo dot longman at gmail dot com
16 years ago
to 2g4wx3:
i think better way for this is using JSON, if you have such module in your PHP. See json.org.

to convert JS array to JSON string: arr.toJSONString();
to convert JSON string to PHP array: json_decode($jsonString);

You can also stringify objects, numbers, etc.
up
-28
cyberchrist at futura dot net
16 years ago
Lately, dealing with databases, I've been finding myself needing to know if one array, $a, is a proper subset of $b.

Mathematically, this is asking (in set theory) [excuse the use of u and n instead of proper Unicode):

( A u B ) n ( ~ B )

What this does is it first limits to known values, then looks for anything outside of B but in the union of A and B (which would be those things in A which are not also in B).

If any value exists in this set, then A is NOT a proper subset of B, because a value exists in A but not in B. For A to be a proper subset, all values in A must be in B.

I'm sure this could easily be done any number of ways but this seems to work for me. It's not got a lot of error detection such as sterilizing inputs or checking input types.

// bool array_subset( array, array )
// Returns true if $a is a proper subset of $b, returns false otherwise.

function array_subset( $a, $b )
{
if( count( array_diff( array_merge($a,$b), $b)) == 0 )
return true;
else
return false;
}
To Top