session_cache_limiter

(PHP 4 >= 4.0.3, PHP 5, PHP 7, PHP 8)

session_cache_limiter — Получает и (или) устанавливает текущий ограничитель кеша

Описание

session_cache_limiter(?string $value = null): string|false

Функция session_cache_limiter() возвращает имя текущего ограничителя кеша.

Режим кеширования определяет, какие HTTP-заголовки управления кешем посылать клиенту. Эти заголовки определяют, какими правилами кеширования контента должны руководствоваться клиент и промежуточные прокси. Установка ограничителя в значение nocache запрещает любое кеширование. Значение public разрешает кеширование как на стороне клиента, так и на прокси-серверах. Значение private запрещает кеширование прокси-серверам, но разрешает клиенту.

Отправка заголовка Expire в режиме private приводит отдельные браузеры, включая Mozilla, в замешательство. Проблему обходят через режим private_no_expire. В этом режиме функция не отправляет заголовок Expire.

Установка для режима кеширования значения '' отключает автоматическую отправку кеш-заголовков.

При запуске запроса режим кеширования сбрасывается до значения по умолчанию, которое хранится в директиве session.cache_limiter. Поэтому вызывать функцию session_cache_limiter() необходимо для каждого запроса перед вызовом функции session_start().

Список параметров

value

Если в парламент value передали значение, которое не равно null, имя текущего режима кеширования изменяется на новое значение.

**Возможные значения**
Значение	Посылаемый заголовок
`public`	Expires: (когда-нибудь в будущем, в зависимости от значения директивы session.cache_expire) Cache-Control: public, max-age=(когда-нибудь в будущем, в зависимости от значения директивы session.cache_expire) Last-Modified: (временная метка последнего сохранения сессии)
`private_no_expire`	Cache-Control: private, max-age=(количество минут директивы session.cache_expire в будущем) Last-Modified: (метка времени последнего сохранения сессии)
`private`	Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: private, max-age=(количество минут директивы session.cache_expire в будущем) Last-Modified: (временная метка последнего сохранения сессии)
`nocache`	Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate Pragma: no-cache

Возвращаемые значения

Функция возвращает имя текущего ограничителя кеша. Функция возвращает false, если функция не смогла изменить значение.

Список изменений

Версия	Описание
8.0.0	Параметр `value` теперь принимает значение `null`.

Примеры

Пример #1 Пример использования функции session_cache_limiter()

<?php

/* Устанавливаем для ограничителя кеша значение 'private' */

session_cache_limiter('private');
$cache_limiter = session_cache_limiter();

echo "Режим кеширования установлен в переменной $cache_limiter<br />";

?>

Смотрите также

session.cache_limiter

Нашли ошибку?

Инструкция • Исправление • Сообщение об ошибке

＋Добавить

Примечания пользователей 24 notes

down

clay at killersoft dot com ¶

17 years ago

The actual headers that are set using the values described above are:

public:
    Expires: pageload + 3 hours
    Cache-Control: public, max-age=10800
    
private:
    Expires: Thu, 19 Nov 1981 08:52:00 GMT
    Cache-Control: private, max-age=10800, pre-check=10800
    
nocache:
    Expires: Thu, 19 Nov 1981 08:52:00 GMT
    Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
    Pragma: no-cache
    
private_no_expire:
    Cache-Control: private, max-age=10800, pre-check=10800
    

Regarding other settings mentioned by some, those just don't do anything. Check the source of PHP, in ext/session/session.c -- the above values are all that actually do anything. Other values, or an emtpy string, result in no cache-limiting headers being set at all.

down

Jeremiah at jkjonesco dot com ¶

18 years ago

If you are trying to work with dynamic binaries such as videos or images, the new IE 7 appears to require the ETag header.  You will need to make sure that you follow the specifications for how ETag works in order for your cache control to work properly.  Mozilla supports the ETag header as well, but does NOT require it for caching.  If you need to cache a dynamic image, video, or other binary file, then be sure to set your ETag and then check for the If-Not-Modified header on subsequent requests so that you can properly return the 304 Not Modified page.

down

ire dot ogunsina at gmail dot com ¶

16 years ago

I have had some trouble preventing IE, particular IE 7 to stop caching pages. I read quite a number of articles relating to people's experiences and how they fixed it but it was hard to find one that worked for me. Eventually I had to use the following fix:
<META HTTP-EQUIV="Pragma" CONTENT="no-cache">
<META HTTP-EQUIV="Expires" CONTENT="-1">

based on the information available on following url: http://support.microsoft.com/kb/234067

Would to God that we'd all quit IE for good. Hope this saves someone some agony over IE.

down

john ¶

19 years ago

In addition to the  above, don't forget to check the php.ini file for the setting:   session.cache_limiter = nocache

Since I use xoops and didn't start the session, I had the SSL/download problem until I noticed this.

down

snakes at ntica dot com ¶

19 years ago

Avoiding caching PHP pages:
After lot of tries and research this is the best combination of headers I've found that seems to work well even with the proxy of visitors that are using satellit connection.

<?
header("ETag: PUB" . time());
header("Last-Modified: " . gmdate("D, d M Y H:i:s", time()-10) . " GMT");
header("Expires: " . gmdate("D, d M Y H:i:s", time() + 5) . " GMT");
header("Pragma: no-cache");
header("Cache-Control: max-age=1, s-maxage=1, no-cache, must-revalidate");
session_cache_limiter("nocache");
?>

down

pulstar at ig dot com dot br ¶

20 years ago

You can find more information about to control the cache in PHP at http://www.php.net/manual/en/function.header.php

If you have a dinamic website and want to allow your visitors to use the back button after they sent a form with the post method, the best combination I found was:

<?php

header("Expires: Sat, 01 Jan 2000 00:00:00 GMT");
header("Last-Modified: ".gmdate("D, d M Y H:i:s")." GMT");
header("Cache-Control: post-check=0, pre-check=0",false);
session_cache_limiter("must-revalidate");

// and after you start the session
session_start();

?>

I try some combinations using header("Cache-Control: no-cache, must-revalidate"), but when clicking the back button, the last changes in the form back to their previous states. The combination above works fine with IE 6.x. I didn't test this with other browsers.

When I try something like session_cache_limiter("nocache, must-revalidate") it doesn't work. The page only updates when I used the browser's refresh button. In dynamic web sites this is not good. The content must be fresh after each click.

I didn't find these combinations like "private, must-revalidate" documented in the manual and I guess that something different from "none, nocache, private, public and private_no_expire" are resolved to "none" or something like that. One thing I notice is that in session_cache_limiter() it is "nocache", but in header() it is "no-cache". This may give us some clues about how session_cache_limiter() function works.

About caching, the perfect solution I think is to give the correct expiration date and time and also the right last-modified header for each element in the web site, when they are really updated. This means a lot of extra controls of course, but may worth in web sites with high overload.

The "public" option means that all available cache in proxies and clientes will be used, so this improves the speed of the web site and also reduces the used bandwidth. But without the right expiration and last-modified headers, you can use it only in static web sites.

The "private" option means that only the cache in clients will be used. This is good for a more sensitive data that can be stored locally in the browser cache. It have some benefits of the public option, but the same restrictions too.

The "nocache" (or no-cache?) option means that the HTML portion will not be cached, but the images, CSS and JS files will. This is good for dynamic websites because you still can use the power of cache without loose the refreshness after each click. These files can be updated when you open the web site or use the browser's refresh button. 
I don't know why, but flash files are never updated when you click the refresh button. A common solution for this is to change the file name when you update the flash file.

The "no-store" option means that all the content will not be cached anyway, including images, CSS or JS files. I don't know if this applyes to flash files too, but is possible. This option must be used with very sensitive data. I think the SSL uses this by default.

down

yves at kochira point com ¶

16 years ago

To avoid a headache while trying the various parameters in Firefox 3.0.1 (+Firebug), just restart the browser after a change... or they're not taken into account (from 'no-cache' to 'public'/'private').

down

richard at izyn dot co dot nz ¶

21 years ago

I found that session_cache_limiter("none") works for me when I create PDFs  on the fly because session_cache_limiter("private") causes the browser(IE6) to cache the PDF indefinitely.

down

jthome at fcgov dot com ¶

21 years ago

In addition to the note above regarding SSL/IE bug/Sessions, also make sure you DO NOT SET THE HEADER 'Pragma: no-cache' if you are sending an inline document (e.g., PDF document).

For example:

<?php

        header("Content-Type: application/pdf");
        header("Content-Disposition: inline; filename=foo.pdf");
        header("Accept-Ranges: bytes");
        header("Content-Length: $len");
        header("Expires: 0");
        header("Cache-Control: private");
//        header("Pragma: no-cache");//don't send this header!!

?>

Best,

--
Jim

down

glenk7901 ¶

9 years ago

I was having a fit trying fix an issue caused by session.cache_limiter.  Somehow I had set this to nocache (a long time ago) in the .ini file and this setting caused the back-button to not work.  When session.cache_limiter was set on private or public, the back-button worked, but then logging out of the site did not work.  I had thought that session.cache_limiter was something that should be enabled, but finally found today that turning it off (by setting it to '') fixed both these problems.  So now the question for me is, when would anybody ever want to use session.cache_limiter?  I was hating Php because of this problem.

down

scott at realorganized dot com ¶

16 years ago

http://us.php.net/session_cache_limiter

sends:

Pragma: no-cache

under some conditions from server to client.

Internet Explorer has a strange interpretation of: Pragma: No-cache
being sent from the server to the client.  

Here's the link:

http://support.microsoft.com/kb/234067

If the client communicates with the server over a secure connection (https://) and the server returns a Pragma: no-cache header with the response, Internet Explorer does not cache the response.

Note, however, that the Pragma: no-cache header was not intended for this. According to the HTTP 1.0 and 1.1 specifications, this header is defined in the context of a request only, not a response, and is actually intended for proxy servers that may prevent certain important requests from reaching the destination Web server. For future applications, the Cache-Control header is the proper means for controlling caching.

For this reason, watch out when using the Pragma: no-cache with https and IE

down

Anonymous ¶

19 years ago

Andrei Chirila, andrei_chirila at yahoo dot com
12-Jan-2005 09:30 
I played about an hour with the download and sessions. yes, to work you'll need session_cache_limiter("must-revalidate"); but this BEFORE session_start() if you want that your download start [IE problem]. Hope someone will need this someday 

====

yes, somebody has needed this today :)

situation: trying to make a session based download management system complete with user login system that requries an authorized user to download some files, and hide all such files from non-authorized users. the user login, download center, and content management system of the site are all tied in to each other, making troubleshooting this headering stuff a headache.

problem: files being served are not accessible thru the regular site, since they are above the htdocs folder in apache, and so headering the file is required, and sessions do not work well with files being headered to the browser.

solution: the download center uses ob_start("");, then  session_cache_limiter("must-revalidate");, before the session_start();, then everything works well.

thank you very much! i was resorting to using a cookie to control this before because i could not figure out how to tie in sessions to the system before!

down

donovan at go4 dot com dot au ¶

19 years ago

IE6 'the file could not be written to the cache':

I tried all the other suggestions mentioned here but none of them worked.

I friend suggested header("Pragma: ");

This worked straight away!

down

justin at justintubbs dot com ¶

20 years ago

I have PHP 4.3 running on a Windows 2003 Server running IIS 6.0 also using SSL encryption for my pages.  I could not (for the life of me) figure out how to get IE 6.0/WinXPPro to recognize a set of HTML tables as an Excel spreadsheet export, and it was due to the header() variables I was using.  Hopefully these are helpful to others who are attempting the same type of export within PHP.

*This example builds on the previously submitted one, adding a few necessary headers.

<?php
    header("Expires: Sat, 01 Jan 2000 00:00:00 GMT");
    header("Last-Modified: ".gmdate("D, d M Y H:i:s")." GMT");
    header("Pragma: public");
    header("Expires: 0");
    header("Cache-Control: must-revalidate, post-check=0, pre-check=0");
    header("Cache-Control: public"); 
    header("Content-Description: File Transfer");
    
    session_cache_limiter("must-revalidate");
    header("Content-Type: application/vnd.ms-excel");
    header('Content-Disposition: attachment; filename="fileToExport.xls"');

    // and after you start the session
    session_start();
?>

down

misterp3d at hotmail dot com ¶

20 years ago

I had a problem using a FORM with POST method when user of my website was using the back button. The page requested a refresh to be able to see again the FORM.

To solve the problem I used : 
<?php
session_cache_limiter('private, must-revalidate');
?>

*You need to write this line before any output

Hope that will help some of you ;)

[P]

down

MerlinsInvite ¶

21 years ago

I solved the problem with pushing downloads to browser's, without needing to play with server/session parameters by using :
header("Content-Disposition: inline; filename=\"$filename\"");
for IE browsers and 
header("Content-Disposition: attachment; filename=\"$filename\"");
for all other browsers.

down

-1

Anonymous ¶

19 years ago

The onLoad method of Actionscript's loadVars class was returning false in IE6 using SSL until I set --> session_cache_limiter("must-revalidate"); <-- on the receiving PHP script.

down

-1

Andrei Chirila, andrei_chirila at yahoo dot com ¶

20 years ago

I played about an hour with the download and sessions. yes, to work you'll need session_cache_limiter("must-revalidate"); but this BEFORE session_start() if you want that your download start [IE problem]. Hope someone will need this someday ...

down

-1

Mikko H?m?l?inen ¶

21 years ago

I had a similair problem (browsers couldn't save files coming from my download-script). Only in my case the problem occured with IE 6.0 and Netscape 7.1. Adding the "session_cache_limiter('public');" before "session_start();" helped.

down

-1

plyrvt at mail dot ru (Yura Pylypenko) ¶

21 years ago

Be careful using session_cache_limiter() with ob_start('ob_gzhandler')
If ob_start('ob_gzhandler') is called after session_cache_limiter() it seems to overwrite cache control headers with 'nocache' equivalent.
So always put ob_start first.

down

-3

Fernando Gabrieli fgabrieli at gmail ¶

18 years ago

<?
    session_cache_limiter ('private, must-revalidate');    

    $cache_limiter = session_cache_limiter();

    //

    session_cache_expire(60); // in minutes 

    session_start() ;
?>

If i do not set must-revalidate, IE seems to cache session variables without refreshing them 

If i post a form then it refreshes the variables

Firefox does not have this problem

So, be sure to use must-revalidate

down

-3

usenet at phord splat com ¶

21 years ago

Hey!  NickyBoy was right!

I looked all over google and his note was the only place that had it right.  But, there's a caveat.

I wrote up my results here:
http://www.phord.com/experiment/cache/

down

-3

radu dot rendec at ines dot ro ¶

19 years ago

I've read the other comments and done some "reasearch" on my own. Using php's session mechanism and explicitly setting the "cache-control" header should not be mixed.

When session_start() is called, the "cache-control" and "pragma" headers are automatically set by php (to whatever value had been specified using session_cache_limiter()).

Explicitly setting those headers _before_ session_start() will have no effect, and explicitly setting them _after_ session_start() will overwrite the settings from session_cache_limiter().

If I had to deal with php sessions, I'd go for using session_cache_limiter() and leaving the headers alone.

down

-3

nickyboy at 4ce.co.uk ¶

22 years ago

The problems people mention about IE are actually a feature!  
Microsoft Knowledge Base Article 316431 says:

In order for Internet Explorer to open documents in Office (or any out-of-process, ActiveX document server), Internet Explorer must save the file to the local cache directory and ask the associated application to load the file by using IPersistFile::Load. If the file is not stored to disk, this operation fails. 

When Internet Explorer communicates with a secure Web site through SSL, Internet Explorer enforces any no-cache request. If the header or headers are present, Internet Explorer does not cache the file. Consequently, Office cannot open the file.

They say this applies to: 
Microsoft Internet Explorer 5.5 for Windows 2000
Microsoft Internet Explorer 5.01 for Windows 2000
Microsoft Internet Explorer version 6 for Windows 2000
not sure about other versions!

hth
nickyboy

＋Добавить