phpday 2021 digital edition


(PHP 4, PHP 5, PHP 7, PHP 8)

systemBelirtilen harici komutu çalıştırır ve çıktısını gösterir


system ( string $komut , int &$sonuç = null ) : string|false

system() işlevi C dilindeki adaşı gibi verilen komut'u çalıştırır ve sonucunu çıktılar.

PHP bir sunucu modülü olarak çalışırken, bu işlev her çıktı satırından sonra HTTP sunucusunun çıktı tamponunu boşaltmaya çalışır.

Bir komutu, çıktısı ortamla etkileşime girmeden çalıştırmak isterseniz passthru() işlevini kullanın.



Çalıştırılacak komut.


Bu değiştirge belirtilmişse çalıştırılan komutun çıktısı bu değişkene yazılır.

Dönen Değerler

Başarısızlık durumunda false aksi takdirde komut çıktısının son satırı döner.


Örnek 1 - system() örneği

echo '<pre>';

// "ls" kabuk komutunun sonucunu çıktılar ve
// çıktının son satırını $son_satır ile döndürürken,
// işlevin dönüş değerini $sonuç değişkenine kaydeder.
$son_satır system('ls'$sonuç);

// Bilgileri basalım
echo '
<hr />Çıktının son satırı: ' 
$son_satır '
<hr />Dönüş değeri: ' 



Kullanıcı kaynaklı verilerin bu işlev üzerinden aktarımına izin verilecekse, kullanıcının bazı komutlar çalıştırarak sistemi kandıramaması için escapeshellarg() veya escapeshellcmd() işlevleri kullanılabilir.


Eğer bir uygulama bu işlevle başlatılmışsa uygulamanın artalanda çalışmasını sürdürebilmesi için uygulama çıktısı ya bir dosyaya ya da başka bir çıktı akımına yönlendirilmelidir. Aksi takdirde, uygulama sonlanana kadar PHP askıda kalacaktır.

Ayrıca Bakınız

add a note add a note

User Contributed Notes 19 notes

no at mail dot com
8 years ago
This is for WINDOWS users. I am running apache and I have been trying for hours now to capture the output of a command.

I'd tried everything that is written here and then continued searching online with no luck at all. The output of the command was never captured. All I got was an empty array.

Finally, I found a comment in a blog by a certain amazing guy that solved my problems.

Adding the string ' 2>&1' to the command name finally returned the output!! This works in exec() as well as system() in PHP since it uses stream redirection to redirect the output to the correct place!

system("yourCommandName 2>&1",$output) ;
mortoray at ecircle-ag dot com
17 years ago
Do not use "system" if you use the "php.ini" option:
    zlib.output_compression = On

Doing so will result in the browser receiving garbage (I'm guessing the headers/buffers get confused).

Use passthru in this case, it appears to work as intended.
dan at thecsl dot org
14 years ago
You probably want to check your system calls for errors. The convention is to return 0  for "no error" which is the same as FALSE which can be confusing. You need to do something like:

= "/usr/bin/pngtopnm $png_file > $pnm_file";
$return_value == 0) or die("returned an error: $cmd");
morris_hirsch at hotmail dot com
17 years ago
another reason to use shell_exec instead of system is when the result is multiple lines such as grep or ls


// this correctly sets answer string to all lines found
//$answer = shell_exec ("grep 'set of color names' *.php ");
//echo "answer = $answer";

// this passes all lines to output (they  show on page)
// and sets answer string to the final line
$sys = system ("grep 'set of color names' *.php ");
"sys =(($sys))";


here is view/source resulting from system call

setprefs.php:// The standard set of color names is:
setprefs.php:// Most browsers accept a wider set of color names
silly.php:  //$answer = shell_exec ("grep 'set of color names' *.php ");
silly.php: $sys = system ("grep 'set of color names' *.php ");
sys =((silly.php: $sys = system ("grep 'set of color names' *.php ");))

and here is view source from using shell_exec instead

answer = setprefs.php:// The standard set of color names is:
setprefs.php:// Most browsers accept a wider set of color names
silly.php:  $answer = shell_exec ("grep 'set of color names' *.php ");
silly.php:// $sys = system ("grep 'set of color names' *.php ");
vlad dot sharanhovich at gmail dot com
13 years ago
The double quote problem on Windows platform discussed earlier here in comments still present in PHP 5.2.5. You can't execute system($command) if $command contains more than 2 " chars. system('"echo" A'); works, while system('"echo" "A"'); does not. Search comment, that was a solution posted to overhaul this issue via temporary .bat file.
eric_REMOVE at movementmovement_REMOVE dot com
16 years ago
It's important to note that if you are running a series of system() commands in a loop, you need to include the second argument in order for them to run synchonously.


// this will execute process.php asynchronously; not waiting for completion before executing the next one.
$array = array('apple', 'banana', 'pear');
foreach($array as $i)
system("php process.php \"fruit=$i\"");

// this will execute process.php 3 times, waiting for the prior command to complete before starting a new one
$array = array('apple', 'banana', 'pear');
foreach($array as $i)
system("php process.php \"fruit=$i\"", $status);
kexianin at diyism dot com
11 years ago
If you can't see any output or error from system(), shell_exec() etc, you could try this:

function my_exec($cmd, $input='')
$proc=proc_open($cmd, array(0=>array('pipe', 'r'), 1=>array('pipe', 'w'), 2=>array('pipe', 'w')), $pipes);
fwrite($pipes[0], $input);fclose($pipes[0]);
          return array(
var_export(my_exec('echo -e $(</dev/stdin) | wc -l', 'h\\nel\\nlo'));

For example, "echo shell_exec('ls');" will get nothing output,
"my_exec('ls');" will get "sh: ls: command not found",
"my_exec('/bin/ls');" will maybe get "sh: /bin/ls: Permission denied",
and the permission may be caused by selinux.
nospam at php dot net
20 years ago
If you are trying to parse a CGI script to your webserver which needs arguments, take a look to the virtual() function .. it took me long before i found out it existed...
It's used like this:
And that works excellent now for me
Daniel Morris (
12 years ago
How to produce a system beep with PHP.

function beep ($int_beeps = 1) {
            for (
$i = 0; $i < $int_beeps; $i++): $string_beeps .= "\x07"; endfor;
            isset (
$_SERVER['SERVER_PROTOCOL']) ? false : print $string_beeps;


This will not do anything when running through a browser, if running through a shell it will produce an audible beep $int_beeps times.  This should work on Windows, Unix, etc.
ccurtis at aet-usa dot com
21 years ago
If no headers have been printed, calling the system() function will flush the headers to the client and insert a newline; no further headers or cookies will be transferred to the browser.  In version 3.0.7, you will not be warned that the Header() function failed, but will be warned if trying to set a cookie.  If you want to continue to send headers after the function call, use exec() instead.
d dot kraft at szo dot de
18 years ago
For PHP running inside a Webserver:

When calling a process via
system("your_process &");
to make it running in background, note that this process is killed when the webserver is restarted.
vdweij at hotmail dot com
15 years ago
It is possible to only capture the error stream (STERR). Here it goes...

(some_command par1 par2 > /dev/null) 3>&1 1>&2 2>&3

-First STDOUT is redirected to /dev/null.
-By using parenthesis it is possible to gain control over STERR and STOUT again.
-Then switch STERR with STOUT.

The switch is using the standard variable switch method -- 3 variables (buckets) are required to swap 2 variables with each other. (you have 2 variables and you need to switch the contents - you must bring in a 3rd temporary variable to hold the contents of one value so you can properly swap them).

This link gave me this information:
grytolle at gmail dot com
11 years ago
This is a work-around that makes the program run in it's own directory instead of the script's.

example usage:
<?php runAsynchronously("c:\games\jazz2\jazz2.exe","-connect"); ?>

function runAsynchronously($path,$arguments) {
$WshShell = new COM("WScript.Shell");
$oShellLink = $WshShell->CreateShortcut("temp.lnk");
$oShellLink->TargetPath = $path;
$oShellLink->Arguments = $arguments;
$oShellLink->WorkingDirectory = dirname($path);
$oShellLink->WindowStyle = 1;
$oExec = $WshShell->Run("temp.lnk", 7, false);
timgolding_10 at hotmail dot com
13 years ago
An example of using the system to call the file command on a linux server. This script detects whether a user posted file is a jpeg, gif or png


=array("JPEG" , "GIF", "PNG");

// The temporary filename of the file in which the uploaded file was stored on the server.
$uploaddir = $_SERVER['DOCUMENT_ROOT']."/images/";
$uploaddir.=basename( $_FILES['uploadedfile']['name']);
//verfiy file using linux FILE command
$last_line = system('file '.escapeshellarg($_FILES['uploadedfile']['tmp_name']), $retval);

//get the file extension returned through magic database
$splitvals=explode(' image data' $last_line);
$vals=explode(':', $splitvals[0]);
$vals[1]=str_replace(' ','', $vals[1]);

if (
in_array($vals[1], $accepted_types))
$vals[1].' was accepted <br />';
//Copy the file to some permanent location
if(move_uploaded_file($_FILES["uploadedfile"]["tmp_name"], $uploaddir))
$uploaddir." was uploaded! <br />";
"There was a problem when uploding the new file, please contact admin about this.";
        else echo
'This file already exists in DB please rename file before uploading';
}else echo
$_FILES['uploadedfile']['error'].'<br />';
Jim Belton
17 years ago
To run a full screen program from a PHP CLI script, redirect input from and output to /dev/tty.  For example:

system("timeconfig > /dev/tty < /dev/tty");

System will wait for the program to finish before continuing.
lc at _REMOVE__THIS_lc dot yi dot org
17 years ago
Re: cpmorris at hotmail dot com and WINNT.

I just spent some time learning to use the php system function.  I managed to get long file names to work for me.  It seems you need to take the same approach that batch files, WSH, and most other programming languages do under WinNT/2K/XP.  Putting double quotes around the Path+Filename seems to work.  So, something like this should have worked for you:

"c:\program files\apache group\apache2\bin\htpasswd"

Note that if you have parameters, they go OUTSIDE of the last quote.  Oh, and don't forget to escape the slashes and quotes! 

I don't know what htpasswd's params are, but let us pretend:

$cmd="\"c:\\program files\\apache group\\apache2\\bin\\htpasswd\" username password";

Hope this helps someone!

cnoelker at softpearls dot de
18 years ago
some tips for using a system()-call for batch files on a windows computer:
* Write the path to the executable with double back-slashes, like so:
* If you are refering to other pathes, e.g. as a parameter, one back-slash works fine.
* Do not use SET for declaring parameters - this does not work! Example:
   SET PATH="C:\path\to\lib"
   echo path is %PATH%
This works fine when started from the comand line, but when called from PHP, the variable is just empty.
2 years ago
Windows commands requiring a GUI.

Alot of the info on this topic is from the 2010-2012 time frame and referring to XP, and basically don't work.  I am using apache/php/mysql in windows 7.

When requiring a system command in windows with a GUI - such as a labview executable, notepad, etc..., others have mentioned the psexec command from sysinternals, since cmd /c wont work, but the specific use was not real clearly defined.  Here is what worked for me on windows 7: 

system('C:/nttools/2019/psexec \\\\ -i  -u administrator -p password -accepteula -nobanner C:\\htdocs\\test\\test.bat');

The path to the psexec executable is with forward slashes, the remote PC network location (which was actually the local PC, not remote) was \\ip_address with an extra backslash for each backslash so that required the 4 \'s.

The path for the command to be executed by psexec required backslashes, which also requires double backslashes.

The -i option is for an interactive program, and is required for it to properly run, otherwise it show up in the taskmanager but not be visable or execute properly if given command line arguments.

The -accepteula -nobanner is to suppress the sysinternals message box about their license.

My command to execute is really long with multiple command line inputs with many surrounded in double quotes, so I thought it would be easiest to put that in a batch file and just call the bat file.  Works great, remote users loading the webpage causes the executable to pop up on the web server, do its analysis and disappear.  Labview can read native excel files with active-x functions and write to a mysql data base to store results etc, so thats a pretty powerful combination of functions.
Alastair Irvine
3 years ago
Note that system() returns FALSE on failure, but this does NOT happen when the command returned a non-zero exit code.  system() won't even fail if the command isn't found.  (bash returns exit code 127 in this case.)  I assume system() only returns FALSE when something seriously bad happens, like not being able to run your shell.
To Top