header

(PHP 4, PHP 5, PHP 7, PHP 8)

headerEnvoie un en-tête HTTP brut

Description

header(string $header, bool $replace = true, int $response_code = 0): void

header() permet de spécifier l'en-tête HTTP string lors de l'envoi des fichiers HTML. Reportez-vous à » HTTP/1.1 Specification pour plus d'informations sur les en-têtes HTTP.

N'oubliez jamais que header() doit être appelée avant que le moindre contenu ne soit envoyé, soit par des lignes HTML habituelles dans le fichier, soit par des affichages PHP. Une erreur très classique est de lire un fichier avec include ou require, et de laisser des espaces ou des lignes vides, qui produiront un affichage avant que la fonction header() ne soit appelée. Le même problème existe avec les fichiers PHP/HTML standards.

<html>
<?php
/* Ceci produira une erreur. Notez la sortie ci-dessus,
* qui se trouve avant l'appel à la fonction header() */
header('Location: http://www.example.com/');
exit;
?>

Liste de paramètres

header

L'en-tête.

Il y a deux en-têtes spéciaux. Le premier commence par la chaîne "HTTP/" (insensible à la casse), qui est utilisée pour signifier le statut HTTP à envoyer. Par exemple, si vous avez configuré Apache pour utiliser les scripts PHP pour gérer les requêtes vers des fichiers inexistants (en utilisant la directive ErrorDocument), assurez-vous que le script génère un code statut correct.

<?php
// This example illustrates the "HTTP/" special case
// Better alternatives in typical use cases include:
// 1. header($_SERVER["SERVER_PROTOCOL"] . " 404 Not Found");
// (to override http status messages for clients that are still using HTTP/1.0)
// 2. http_response_code(404); (to use the default message)
header("HTTP/1.1 404 Not Found");
?>

Le deuxième type d'appel spécial est "Location:". Non seulement il renvoie un en-tête au client, mais, en plus, il envoie un statut REDIRECT (302) au navigateur tant qu'un code statut 201 ou 3xx n'a pas été envoyé.

<?php
header
("Location: http://www.example.com/"); /* Redirection du navigateur */

/* Assurez-vous que la suite du code ne soit pas exécutée une fois la redirection effectuée. */
exit;
?>

replace

Le paramètre optionnel replace indique si la fonction header() doit remplacer un en-tête précédemment émis, ou bien ajouter un autre en-tête du même type. Par défaut, un nouvel en-tête va écraser le précédent, mais si vous passez false dans cet argument, vous pouvez forcer les en-têtes multiples pour un même type d'en-tête. Par exemple :

<?php
header
('WWW-Authenticate: Negotiate');
header('WWW-Authenticate: NTLM', false);
?>

response_code

Force le code réponse HTTP à la valeur spécifiée. À noter que ce paramètre a un effet uniquement si header n'est pas vide.

Valeurs de retour

Aucune valeur n'est retournée.

Erreurs / Exceptions

Lors de l'échec de la planification de l'envoi d'un en-tête, header() lève une erreur de niveau E_WARNING.

Exemples

Exemple #1 Boîte de téléchargement

Si vous voulez que vos utilisateurs recoivent une alerte pour sauver les fichiers générés, comme si vous génériez un fichier PDF, vous pouvez utiliser l'en-tête » Content-Disposition pour fournir un nom de fichier par défaut, à afficher dans le dialogue de sauvegarde.

<?php
// Vous voulez afficher un pdf
header('Content-Type: application/pdf');

// Il sera nommé downloaded.pdf
header('Content-Disposition: attachment; filename="downloaded.pdf"');

// Le source du PDF original.pdf
readfile('original.pdf');
?>

Exemple #2 Directives concernant la mise en cache

Les scripts PHP génèrent souvent du HTML dynamiquement, qui ne doit pas être mis en cache, ni par le client, ni par les proxy intermédiaires. On peut forcer la désactivation du cache de nombreux clients et proxy avec :

<?php
header
("Cache-Control: no-cache, must-revalidate"); // HTTP/1.1
header("Expires: Sat, 26 Jul 1997 05:00:00 GMT"); // Date dans le passé
?>

Note:

Vous pouvez vous rendre compte que vos pages ne sont jamais mises en cache même si vous utilisez tous les en-têtes ci-dessus. Il existe toute une collection de paramètres que les utilisateurs peuvent modifier sur leur navigateur pour modifier le comportement par défaut du cache. En envoyant les en-têtes ci-dessus, vous pouvez imposer vos propres valeurs.

De plus, les paramètres session_cache_limiter() et session.cache_limiter peuvent être utilisés pour générer les en-têtes de caches corrects, lorsque les sessions sont utilisées.

Exemple #3 Paramétrer un cookie

setcookie() offre un moyen pratique de paramétrer des cookies. Pour définir un cookie avec des attributs non pris en charge par setcookie(), header() peut être utilisé.

Par exemple, le code suivant définit un cookie qui inclut un attribut Partitioned.

<?php
header
('Set-Cookie: name=value; Secure; Path=/; SameSite=None; Partitioned;');
?>

Notes

Note:

Les en-têtes ne seront accessibles et s'afficheront que lorsqu'un SAPI qui les supporte sera utilisé.

Note:

Vous pouvez utiliser le système de cache (output buffering) pour contourner ce problème. Tous vos textes générés seront mis en buffer sur le serveur jusqu'à ce que vous les envoyiez. Vous pouvez utiliser les fonctions ob_start() et ob_end_flush() dans vos scripts, ou en modifiant la directive de configuration output_buffering dans votre fichier php.ini ou vos fichiers de configuration du serveur.

Note:

Le code statut HTTP doit toujours être le premier à être envoyé au client, au regard de l'actuel header() qui peut être le premier ou non. Le statut peut être écrasé en appelant header() avec un nouveau statut à n'importe quel moment même si l'en-tête HTTP a déjà été envoyé.

Note:

La plupart des clients moderne accepte des URIs relative comme argument de » Location:, mais certains client plus ancien exigent une URI absolue y compris le protocole, l'hôte et le chemin absolu. Vous pouvez généralement utiliser les variables globales $_SERVER['HTTP_HOST'], $_SERVER['PHP_SELF'] et dirname() pour construire vous-même une URI absolue :

<?php
/* Redirection vers une page différente du même dossier */
$host = $_SERVER['HTTP_HOST'];
$uri = rtrim(dirname($_SERVER['PHP_SELF']), '/\\');
$extra = 'mypage.php';
header("Location: http://$host$uri/$extra");
exit;
?>

Note:

L'ID de session n'est pas passé avec l'en-tête Location même si session.use_trans_sid est activé. Il doit être passé manuellement en utilisant la constante SID.

Voir aussi

add a note

User Contributed Notes 26 notes

up
247
mjt at jpeto dot net
15 years ago
I strongly recommend, that you use

header($_SERVER["SERVER_PROTOCOL"]." 404 Not Found");

instead of

header("HTTP/1.1 404 Not Found");

I had big troubles with an Apache/2.0.59 (Unix) answering in HTTP/1.0 while I (accidentially) added a "HTTP/1.1 200 Ok" - Header.

Most of the pages were displayed correct, but on some of them apache added weird content to it:

A 4-digits HexCode on top of the page (before any output of my php script), seems to be some kind of checksum, because it changes from page to page and browser to browser. (same code for same page and browser)

"0" at the bottom of the page (after the complete output of my php script)

It took me quite a while to find out about the wrong protocol in the HTTP-header.
up
169
Marcel G
14 years ago
Several times this one is asked on the net but an answer could not be found in the docs on php.net ...

If you want to redirect an user and tell him he will be redirected, e. g. "You will be redirected in about 5 secs. If not, click here." you cannot use header( 'Location: ...' ) as you can't sent any output before the headers are sent.

So, either you have to use the HTML meta refresh thingy or you use the following:

<?php
header
( "refresh:5;url=wherever.php" );
echo
'You\'ll be redirected in about 5 secs. If not, click <a href="wherever.php">here</a>.';
?>

Hth someone
up
91
Dylan at WeDefy dot com
16 years ago
A quick way to make redirects permanent or temporary is to make use of the $http_response_code parameter in header().

<?php
// 301 Moved Permanently
header("Location: /foo.php",TRUE,301);

// 302 Found
header("Location: /foo.php",TRUE,302);
header("Location: /foo.php");

// 303 See Other
header("Location: /foo.php",TRUE,303);

// 307 Temporary Redirect
header("Location: /foo.php",TRUE,307);
?>

The HTTP status code changes the way browsers and robots handle redirects, so if you are using header(Location:) it's a good idea to set the status code at the same time. Browsers typically re-request a 307 page every time, cache a 302 page for the session, and cache a 301 page for longer, or even indefinitely. Search engines typically transfer "page rank" to the new location for 301 redirects, but not for 302, 303 or 307. If the status code is not specified, header('Location:') defaults to 302.
up
38
mandor at mandor dot net
18 years ago
When using PHP to output an image, it won't be cached by the client so if you don't want them to download the image each time they reload the page, you will need to emulate part of the HTTP protocol.

Here's how:

<?php

// Test image.
$fn = '/test/foo.png';

// Getting headers sent by the client.
$headers = apache_request_headers();

// Checking if the client is validating his cache and if it is current.
if (isset($headers['If-Modified-Since']) && (strtotime($headers['If-Modified-Since']) == filemtime($fn))) {
// Client's cache IS current, so we just respond '304 Not Modified'.
header('Last-Modified: '.gmdate('D, d M Y H:i:s', filemtime($fn)).' GMT', true, 304);
} else {
// Image not cached or cache outdated, we respond '200 OK' and output the image.
header('Last-Modified: '.gmdate('D, d M Y H:i:s', filemtime($fn)).' GMT', true, 200);
header('Content-Length: '.filesize($fn));
header('Content-Type: image/png');
print
file_get_contents($fn);
}

?>

That way foo.png will be properly cached by the client and you'll save bandwith. :)
up
4
Emmanuel Chazard
1 year ago
If you use header() to allow the user to download a file, it's very important to check the encoding of the script itself. Your script should be encoded in UTF-8, but definitely not in UTF-8-BOM! The presence of BOM will alter the file received by the user. Let the following script:

<?php

$content
= file_get_contents('test_download.png') ;
$name = 'test.png' ;
$size = strlen($content) ;

header('Content-Description: File Transfer');
header('Content-Type: application/octet-stream');
header('Cache-Control: no-cache, must-revalidate');
header('Expires: 0');
header('Content-Disposition: attachment; filename="'.$name.'"');
header('Content-Length: ' . $size);
header('Pragma: public');

echo
$content ;

?>

Irrespectively from the encoding of test_download.png, when this PHP script is encoded in UTF-8-BOM, the content received by the user is different:
- a ZWNBSP byte (U+FEFF) is added to the beginning of the file
- the file content is truncated!!!
If it's a binary file (e.g. image, proprietary format), the file will become unreadable.
up
10
php at ober-mail dot de
4 years ago
Since PHP 5.4, the function `http_​response_​code()` can be used to set the response code instead of using the `header()` function, which requires to also set the correct protocol version (which can lead to problems, as seen in other comments).
up
29
bebertjean at yahoo dot fr
15 years ago
If using the 'header' function for the downloading of files, especially if you're passing the filename as a variable, remember to surround the filename with double quotes, otherwise you'll have problems in Firefox as soon as there's a space in the filename.

So instead of typing:

<?php
header
("Content-Disposition: attachment; filename=" . basename($filename));
?>

you should type:

<?php
header
("Content-Disposition: attachment; filename=\"" . basename($filename) . "\"");
?>

If you don't do this then when the user clicks on the link for a file named "Example file with spaces.txt", then Firefox's Save As dialog box will give it the name "Example", and it will have no extension.

See the page called "Filenames_with_spaces_are_truncated_upon_download" at
http://kb.mozillazine.org/ for more information. (Sorry, the site won't let me post such a long link...)
up
3
David Spector
3 years ago
Please note that there is no error checking for the header command, either in PHP, browsers, or Web Developer Tools.

If you use something like "header('text/javascript');" to set the MIME type for PHP response text (such as for echoed or Included data), you will get an undiagnosed failure.

The proper MIME-setting function is "header('Content-type: text/javascript');".
up
8
yjf_victor
8 years ago
According to the RFC 6226 (https://tools.ietf.org/html/rfc6266), the only way to send Content-Disposition Header with encoding is:

Content-Disposition: attachment;
filename*= UTF-8''%e2%82%ac%20rates

for backward compatibility, what should be sent is:

Content-Disposition: attachment;
filename="EURO rates";
filename*=utf-8''%e2%82%ac%20rates

As a result, we should use

<?php
$filename
= '中文文件名.exe'; // a filename in Chinese characters

$contentDispositionField = 'Content-Disposition: attachment; '
. sprintf('filename="%s"; ', rawurlencode($filename))
.
sprintf("filename*=utf-8''%s", rawurlencode($filename));

header('Content-Type: application/octet-stream');

header($contentDispositionField);

readfile('file_to_download.exe');
?>

I have tested the code in IE6-10, firefox and Chrome.
up
11
sk89q
16 years ago
You can use HTTP's etags and last modified dates to ensure that you're not sending the browser data it already has cached.

<?php
$last_modified_time
= filemtime($file);
$etag = md5_file($file);

header("Last-Modified: ".gmdate("D, d M Y H:i:s", $last_modified_time)." GMT");
header("Etag: $etag");

if (@
strtotime($_SERVER['HTTP_IF_MODIFIED_SINCE']) == $last_modified_time ||
trim($_SERVER['HTTP_IF_NONE_MATCH']) == $etag) {
header("HTTP/1.1 304 Not Modified");
exit;
}
?>
up
6
nospam at nospam dot com
8 years ago
<?php

// Response codes behaviors when using
header('Location: /target.php', true, $code) to forward user to another page:

$code = 301;
// Use when the old page has been "permanently moved and any future requests should be sent to the target page instead. PageRank may be transferred."

$code = 302; (default)
// "Temporary redirect so page is only cached if indicated by a Cache-Control or Expires header field."

$code = 303;
// "This method exists primarily to allow the output of a POST-activated script to redirect the user agent to a selected resource. The new URI is not a substitute reference for the originally requested resource and is not cached."

$code = 307;
// Beware that when used after a form is submitted using POST, it would carry over the posted values to the next page, such if target.php contains a form processing script, it will process the submitted info again!

// In other words, use 301 if permanent, 302 if temporary, and 303 if a results page from a submitted form.
// Maybe use 307 if a form processing script has moved.

?>
up
4
tim at sharpwebdevelopment dot com
6 years ago
The header call can be misleading to novice php users.
when "header call" is stated, it refers the the top leftmost position of the file and not the "header()" function itself.
"<?php" opening tag must be placed before anything else, even whitespace.
up
5
David
7 years ago
It seems the note saying the URI must be absolute is obsolete. Found on https://en.wikipedia.org/wiki/HTTP_location

«An obsolete version of the HTTP 1.1 specifications (IETF RFC 2616) required a complete absolute URI for redirection.[2] The IETF HTTP working group found that the most popular web browsers tolerate the passing of a relative URL[3] and, consequently, the updated HTTP 1.1 specifications (IETF RFC 7231) relaxed the original constraint, allowing the use of relative URLs in Location headers.»
up
8
ben at indietorrent dot org
12 years ago
Be aware that sending binary files to the user-agent (browser) over an encrypted connection (SSL/TLS) will fail in IE (Internet Explorer) versions 5, 6, 7, and 8 if any of the following headers is included:

Cache-control:no-store
Cache-control:no-cache

See: http://support.microsoft.com/kb/323308

Workaround: do not send those headers.

Also, be aware that IE versions 5, 6, 7, and 8 double-compress already-compressed files and do not reverse the process correctly, so ZIP files and similar are corrupted on download.

Workaround: disable compression (beyond text/html) for these particular versions of IE, e.g., using Apache's "BrowserMatch" directive. The following example disables compression in all versions of IE:

BrowserMatch ".*MSIE.*" gzip-only-text/html
up
3
chris at ocproducts dot com
7 years ago
Note that 'session_start' may overwrite your custom cache headers.
To remedy this you need to call:

session_cache_limiter('');

...after you set your custom cache headers. It will tell the PHP session code to not do any cache header changes of its own.
up
8
jp at webgraphe dot com
20 years ago
A call to session_write_close() before the statement

<?php
header
("Location: URL");
exit();
?>

is recommended if you want to be sure the session is updated before proceeding to the redirection.

We encountered a situation where the script accessed by the redirection wasn't loading the session correctly because the precedent script hadn't the time to update it (we used a database handler).

JP.
up
8
shutout2730 at yahoo dot com
16 years ago
It is important to note that headers are actually sent when the first byte is output to the browser. If you are replacing headers in your scripts, this means that the placement of echo/print statements and output buffers may actually impact which headers are sent. In the case of redirects, if you forget to terminate your script after sending the header, adding a buffer or sending a character may change which page your users are sent to.

This redirects to 2.html since the second header replaces the first.

<?php
header
("location: 1.html");
header("location: 2.html"); //replaces 1.html
?>

This redirects to 1.html since the header is sent as soon as the echo happens. You also won't see any "headers already sent" errors because the browser follows the redirect before it can display the error.

<?php
header
("location: 1.html");
echo
"send data";
header("location: 2.html"); //1.html already sent
?>

Wrapping the previous example in an output buffer actually changes the behavior of the script! This is because headers aren't sent until the output buffer is flushed.

<?php
ob_start
();
header("location: 1.html");
echo
"send data";
header("location: 2.html"); //replaces 1.html
ob_end_flush(); //now the headers are sent
?>
up
3
Refugnic
14 years ago
My files are in a compressed state (bz2). When the user clicks the link, I want them to get the uncompressed version of the file.

After decompressing the file, I ran into the problem, that the download dialog would always pop up, even when I told the dialog to 'Always perform this operation with this file type'.

As I found out, the problem was in the header directive 'Content-Disposition', namely the 'attachment' directive.

If you want your browser to simulate a plain link to a file, either change 'attachment' to 'inline' or omit it alltogether and you'll be fine.

This took me a while to figure out and I hope it will help someone else out there, who runs into the same problem.
up
3
dev at omikrosys dot com
14 years ago
Just to inform you all, do not get confused between Content-Transfer-Encoding and Content-Encoding

Content-Transfer-Encoding specifies the encoding used to transfer the data within the HTTP protocol, like raw binary or base64. (binary is more compact than base64. base64 having 33% overhead).
Eg Use:- header('Content-Transfer-Encoding: binary');

Content-Encoding is used to apply things like gzip compression to the content/data.
Eg Use:- header('Content-Encoding: gzip');
up
-1
razvan_bc at yahoo dot com
6 years ago
<?php
/* This will give an error. Note the output
* above, which is before the header() call */
header('Location: http://www.example.com/');
exit;
?>

this example is pretty good BUT in time you use "exit" the parser will still work to decide what's happening next the "exit" 's action should do ('cause if you check the manual exit works in others situations too).
SO MY POINT IS : you should use :
<?php

header
('Location: http://www.example.com/');
die();

?>
'CAUSE all die function does is to stop the script ,there is no other place for interpretation and the scope you choose to break the action of your script is quickly DONE!!!

there are many situations with others examples and the right choose for small parts of your scrips that make differences when you write your php framework at well!

Thanks Rasmus Lerdorf and his team to wrap off parts of unusual php functionality ,php 7 roolez!!!!!
up
0
scott at lucentminds dot com
14 years ago
If you want to remove a header and keep it from being sent as part of the header response, just provide nothing as the header value after the header name. For example...

PHP, by default, always returns the following header:

"Content-Type: text/html"

Which your entire header response will look like

HTTP/1.1 200 OK
Server: Apache/2.2.11 (Unix)
X-Powered-By: PHP/5.2.8
Date: Fri, 16 Oct 2009 23:05:07 GMT
Content-Type: text/html; charset=UTF-8
Connection: close

If you call the header name with no value like so...

<?php

header
( 'Content-Type:' );

?>

Your headers now look like this:

HTTP/1.1 200 OK
Server: Apache/2.2.11 (Unix)
X-Powered-By: PHP/5.2.8
Date: Fri, 16 Oct 2009 23:05:07 GMT
Connection: close
up
0
Anonymous
15 years ago
I just want to add, becuase I see here lots of wrong formated headers.

1. All used headers have first letters uppercase, so you MUST follow this. For example:

Location, not location
Content-Type, not content-type, nor CONTENT-TYPE

2. Then there MUST be colon and space, like

good: header("Content-Type: text/plain");
wrong: header("Content-Type:text/plain");

3. Location header MUST be absolute uri with scheme, domain, port, path, etc.

good: header("Location: http://www.example.com/something.php?a=1");

4. Relative URIs are NOT allowed

wrong: Location: /something.php?a=1
wrong: Location: ?a=1

It will make proxy server and http clients happier.
up
0
mzheng[no-spam-thx] at ariba dot com
15 years ago
For large files (100+ MBs), I found that it is essential to flush the file content ASAP, otherwise the download dialog doesn't show until a long time or never.

<?php
header
("Content-Disposition: attachment; filename=" . urlencode($file));
header("Content-Type: application/force-download");
header("Content-Type: application/octet-stream");
header("Content-Type: application/download");
header("Content-Description: File Transfer");
header("Content-Length: " . filesize($file));
flush(); // this doesn't really matter.

$fp = fopen($file, "r");
while (!
feof($fp))
{
echo
fread($fp, 65536);
flush(); // this is essential for large downloads
}
fclose($fp);
?>
up
-2
Vinay Kotekar
9 years ago
Saving php file in ANSI no isuess but when saving the file in UTF-8 format for various reasons remember to save the file without any BOM ( byte-order mark) support.
Otherwise you will face problem of headers not being properly sent
eg.
<?php header("Set-Cookie: name=user");?>

Would give something like this :-

Warning: Cannot modify header information - headers already sent by (output started at C:\www\info.php:1) in C:\www\info.php on line 1
up
-1
Cody G.
14 years ago
After lots of research and testing, I'd like to share my findings about my problems with Internet Explorer and file downloads.

Take a look at this code, which replicates the normal download of a Javascript:

<?php
if(strstr($_SERVER["HTTP_USER_AGENT"],"MSIE")==false) {
header("Content-type: text/javascript");
header("Content-Disposition: inline; filename=\"download.js\"");
header("Content-Length: ".filesize("my-file.js"));
} else {
header("Content-type: application/force-download");
header("Content-Disposition: attachment; filename=\"download.js\"");
header("Content-Length: ".filesize("my-file.js"));
}
header("Expires: Fri, 01 Jan 2010 05:00:00 GMT");
if(
strstr($_SERVER["HTTP_USER_AGENT"],"MSIE")==false) {
header("Cache-Control: no-cache");
header("Pragma: no-cache");
}
include(
"my-file.js");
?>

Now let me explain:

I start out by checking for IE, then if not IE, I set Content-type (case-sensitive) to JS and set Content-Disposition (every header is case-sensitive from now on) to inline, because most browsers outside of IE like to display JS inline. (User may change settings). The Content-Length header is required by some browsers to activate download box. Then, if it is IE, the "application/force-download" Content-type is sometimes required to show the download box. Use this if you don't want your PDF to display in the browser (in IE). I use it here to make sure the box opens. Anyway, I set the Content-Disposition to attachment because I already know that the box will appear. Then I have the Content-Length again.

Now, here's my big point. I have the Cache-Control and Pragma headers sent only if not IE. THESE HEADERS WILL PREVENT DOWNLOAD ON IE!!! Only use the Expires header, after all, it will require the file to be downloaded again the next time. This is not a bug! IE stores downloads in the Temporary Internet Files folder until the download is complete. I know this because once I downloaded a huge file to My Documents, but the Download Dialog box put it in the Temp folder and moved it at the end. Just think about it. If IE requires the file to be downloaded to the Temp folder, setting the Cache-Control and Pragma headers will cause an error!

I hope this saves someone some time!
~Cody G.
up
-3
Angelica Perduta
4 years ago
I made a script that generates an optimized image for use on web pages using a 404 script to resize and reduce original images, but on some servers it was generating the image but then not using it due to some kind of cache somewhere of the 404 status. I managed to get it to work with the following and although I don't quite understand it, I hope my posting here does help others with similar issues:

header_remove();
header("Cache-Control: no-store, no-cache, must-revalidate, max-age=0");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");
// ... and then try redirecting
// 201 = The request has been fulfilled, resulting in the creation of a new resource however it's still not loading
// 302 "moved temporarily" does seems to load it!
header("location:$dst", FALSE, 302); // redirect to the file now we have it
To Top