ssh2_shell

(PECL ssh2 >= 0.9.0)

ssh2_shellЗапрашивает интерактивный терминал

Описание

ssh2_shell(
    resource $session,
    string $termtype = "vanilla",
    ?array $env = null,
    int $width = 80,
    int $height = 25,
    int $width_height_type = SSH2_TERM_UNIT_CHARS
): resource|false

Открывает терминал к удалённому серверу и выделяет ему поток.

Список параметров

session

Идентификатор соединения SSH, полученный из ssh2_connect().

termtype

Тип терминала termtype. Должен соответствовать одному из перечисленных в серверном файле /etc/termcap.

env

env может содержать ассоциативный массив пар имя/значение, представляющий переменные окружения, которые надо выставить в терминале.

width

Ширина виртуального терминала.

height

Высота виртуального терминала.

width_height_type

width_height_type должен быть SSH2_TERM_UNIT_CHARS или SSH2_TERM_UNIT_PIXELS.

Возвращаемые значения

Возвращает ресурс (resource) потока в случае успешного выполнения или false, если возникла ошибка.

Примеры

Пример #1 Запрос интерактивного терминала

<?php
$connection
= ssh2_connect('shell.example.com', 22);
ssh2_auth_password($connection, 'username', 'password');

$stream = ssh2_shell($connection, 'vt102', null, 80, 24, SSH2_TERM_UNIT_CHARS);
?>

Смотрите также

  • ssh2_exec() - Выполнение команды на удалённом сервере
  • ssh2_tunnel() - Открыть туннель через удалённый сервер
  • ssh2_fetch_stream() - Получение расширенного потока данных

add a note

User Contributed Notes 9 notes

up
6
stefanov at uk dot ibm dot com
16 years ago
Do not use \n to end the command. Some server will fail to process. Use always the standard for PHP end of line: PHP_EOL

'suri at suribala dot com"'s example should be modified as follows (also change the double quotes to single, for better performance):

<?php

$con
=ssh2_connect('192.168.0.1', 22);
ssh2_auth_password($con, 'user', 'password');
$shell=ssh2_shell($con, 'xterm');
fwrite( $shell, 'cd /dir_one;'.PHP_EOL);
fwrite( $shell, 'ls -la;'.PHP_EOL);
fwrite( $shell, 'cd /dir_two;'.PHP_EOL);
fwrite( $shell, 'ls -la;'.PHP_EOL);

?>

Cheers,

Pimmy
up
4
tuxedobob at mac dot com
10 years ago
Keep in mind that when using ssh2_shell, the remote system's EOL may not be the same as PHP's EOL, so it may not be safe to use PHP_EOL. The native EOL for Windows is \r\n, while Unix is typically merely \n, and classic Mac for some reason is \r.

If you're running PHP on Windows (\r\n) and sshing into a Unix box (\n) you're going to end up sending extra lines. My experience so far is that it just acts as though you typed nothing, which may cause issues with password prompts.

Oh, and \n\r? Don't do that. Nobody does that.
up
2
galvao at galvao dot eti dot br
17 years ago
In response to webmaster at spectreanime dot com:

"For some obscur reasons, just after ur command, u need to make a sleep to be sure, that the command has reached the server and is running"

Actually what you must do is set the blocking of the string to true, so it waits until the server sends data to the STDOUT before echoing it.

So, instead of:

sleep(1);

Just do:

stream_set_blocking($stdio, true);

Best regards,
up
2
webmaster at spectreanime dot com
19 years ago
// Connection to SSH server
echo "Connexion SSH ";
if (!($resource=@ssh2_connect("192.168.0.1"))) {
echo "[FAILED]<br />";
exit(1);
}
echo "[OK]<br />";

// Authentification by login/passwd
echo "Authentification ";
if (!@ssh2_auth_password($resource,"root","your_password")) {
echo "[FAILED]<br />";
exit(1);
}
echo "[OK]<br />";

// We need a shell
echo "Shell stdio ";
if (!($stdio = @ssh2_shell($resource,"xterm"))) {
echo "[FAILED]<br />";
exit(1);
}
echo "[OK]<br />";

// Execution of any command
// Be careful to add an '\n' at the end of the command
$command = "/bin/ls /tmp\n";
fwrite($stdio,$command);

// IMPORTANT
// For some obscur reasons, just after ur command, u need to make a sleep to be sure, that the command has reached the server and is running
sleep(1);

// Then u can fetch the stream to see what happens on stdio
while($line = fgets($stdio)) {
flush();
echo $line."<br />";
}

// It's always cleaner to close all stream
fclose($stdio);

I truly hope i'll help someone :)
up
2
josh at hydril dot com
17 years ago
To run a shell script with all the variables that you would have when logged in interactively add bash -l or sh --login infront of your command. The script I use creates a shell script, copies the script to the box with ssh2_scp_send, then executes the script with ssh2_exec. Hope this helps somebody.

<?php

//Example

$script1 = "bash -l /etc/rc.d/rc.httpd restart";

$connection = ssh2_connect('shell.example.com', 22);
ssh2_auth_password($connection, 'username', 'password');

$stream = ssh2_exec($connection, $script1);
?>
up
1
vgopu1 at gmail dot com
17 years ago
Hi,

we could also use shell_exec to execute multiple related commands
separated by semicolon (;).

And I figured out problem that sometimes arise related to the execution of complex java c/c++ programs. All we need to do is to set the required environment variables. I have a environment variable in .bash_profile. This variable would be set when I log into my account normally through shell. But when we use ssh2_connect(), the environment variables in the .bash_profile are not set, all we need to do is export the required environment variables with shell_exec();

example:

$conn = ssh2_connect($ipaddress);
ssh2_auth_password($conn,$username,$passwd);
$cmd1="/path/to/program1";
$cmd2="/path/to/program2";
$env1="export Variable_name1=path1";
$env2="export Variable_name2=path2"
$stream = ssh2_exec($connection,"$env1; $env2; $cmd1; $cmd2");//this would execute all the //commands and return
// stream
stream_set_blocking($stream, true);
while($o=fgets($stream)){
echo $o.'<br>';
}

...
...

Thanks,
Vikram Gopu .
http:\\my.lsu.edu/vgopu1
up
0
nogueiraconsultoria at gmail dot com
4 years ago
I get it a work script for multiple commands. This script return output of each command on array, indexed by the "command".

Att: ssh2_cmd() dont work for multiple commands, thus ssh2_shell(). Attencion for de EOL on witch type of SO. I used "\n" at the end of witch command, but maybe other options like "<br>, ; , etc);

$connection = ssh2_connect($input_host_ip, 22);

if (false === $connection) {
error_log("ERROR função SSH_UMTELECOM: Connection failed!\n",3,$log_file);
exit();
}else{
if($debugar){error_log("SSH_UMTELECOM: Connection success to $input_host_ip!\n",3,$log_file);}

$auth = @ssh2_auth_password($connection, $user, $pass);
if (false === $auth) {
error_log("ERROR função SSH_UMTELECOM: Authentication failed on $input_host_ip (user: $user)!\n",3,$log_file);
exit();
}else{
if($debugar){error_log("SSH_UMTELECOM: Authentication success to $input_host_ip!\n",3,$log_file);}

error_log("Iniciando Stream: $connection\n",3,$log_file);
$output_array = array();
$shell = ssh2_shell($connection, 'vt100');

foreach($input_cmd as $cmd){
if($debugar){error_log("shell: $cmd\n",3,$log_file);}
$output_stream = ""; # Limpa variável para cada interação
fwrite($shell, "$cmd\n"); # Não esquecer o "\n" ao término de cada comando
#stream_set_blocking($shell, true); # Não funciona, aguarda infinitamente
sleep(2); # 2 segundos para redes com alta latência
while($output_streams = fgets($shell)){
$output_stream .= $output_streams;
flush();# Limpa o conteúdo para a próxima interação
}
$output_array[] = $output_stream; # Reune cada retorno em seu respectivo comando
}
fclose($shell); # Gracius logout from shell
}# Fim if false === $auth
}# Fim if false === $conenection
up
0
tsschulz at gmx dot net
13 years ago
In my case the ssh2_shell doesn't work every time. There were many problems:
- If I use stream_get_contents, the command(s) never executed
- with while ($buf = fgets...) the loop never stops
- without sleep(1) before stream_set_blocking, the command wasn't execute every time. Anyone knows why?
That's what I made, and it works - but I think it isn't what it should be:
<?php
$strCommand
= 'tar -C /path/to/extract -xjf /path/from/file.tar.bz2';
$sshStream = ssh2_shell($this->sshSession, 'xterm', null, 120, 24, SSH2_TERM_UNIT_CHARS);
fwrite($sshStream, $strCommand . PHP_EOL);
sleep(1);
stream_set_blocking($sshStream, true);
$sshUntarRetval = "";
while (
$buf = fgets($sshStream,4096)) {
flush();
$sshUntarRetval .= $buf;
if (
strpos($buf, 'tar -C') !== false)
{
break;
}
}
fclose($sshStream);
?>
up
-2
suri at suribala dot com
19 years ago
Using ssh_exec, one could execute only one command at a time. However, ssh_shell, offers greater flexibility.

Here is an example:

<?php

$con
=ssh2_connect('192.168.0.1', 22);
ssh2_auth_password($con, "user", "password");
$shell=ssh2_shell($con, 'xterm');
fwrite( $shell, "cd /dir_one\n");
fwrite( $shell, "ls -la\n");
fwrite( $shell, "cd /dir_two\n");
fwrite( $shell, "ls -la\n");

?>

Thanks Sara for your implementation and your help !
To Top