json_encode

(PHP 5 >= 5.2.0, PHP 7, PHP 8, PECL json >= 1.2.0)

json_encodeВозвращает JSON-представление данных

Описание

json_encode(mixed $value, int $flags = 0, int $depth = 512): string|false

Возвращает строку, содержащую JSON-представление для указанного value. Если параметр является массивом (array) или объектом (object), он будет рекурсивно сериализован.

Если сериализуемое значение является объектом, то по умолчанию будут включены только публично видимые свойства. В качестве альтернативы класс может реализовать интерфейс JsonSerializable для управления тем, как его значения сериализуются в JSON.

На кодирование влияет параметр flags и, кроме того, кодирование значений типа float зависит от значения serialize_precision.

Список параметров

value

value - значение, которое будет закодировано. Может быть любого типа, кроме resource.

Функция работает только с кодировкой UTF-8.

Замечание:

PHP реализует надмножество JSON, который описан в первоначальном » RFC 7159.

flags

Битовая маска, составляемая из значений JSON_FORCE_OBJECT, JSON_HEX_QUOT, JSON_HEX_TAG, JSON_HEX_AMP, JSON_HEX_APOS, JSON_INVALID_UTF8_IGNORE, JSON_INVALID_UTF8_SUBSTITUTE, JSON_NUMERIC_CHECK, JSON_PARTIAL_OUTPUT_ON_ERROR, JSON_PRESERVE_ZERO_FRACTION, JSON_PRETTY_PRINT, JSON_UNESCAPED_LINE_TERMINATORS, JSON_UNESCAPED_SLASHES, JSON_UNESCAPED_UNICODE, JSON_THROW_ON_ERROR. Смысл этих констант объясняется на странице JSON-констант.

depth

Устанавливает максимальную глубину. Должен быть больше нуля.

Возвращаемые значения

Возвращает строку (string), закодированную JSON или false в случае возникновения ошибки.

Список изменений

Версия Описание
7.3.0 Добавлена константа JSON_THROW_ON_ERROR для параметра flags.
7.2.0 Добавлены константы JSON_INVALID_UTF8_IGNORE и JSON_INVALID_UTF8_SUBSTITUTE для параметра flags.
7.1.0 Добавлена константа JSON_UNESCAPED_LINE_TERMINATORS для параметра flags.
7.1.0 При кодировании чисел с плавающей точкой (float) используется serialize_precision вместо precision.

Примеры

Пример #1 Пример использования json_encode()

<?php
$arr
= array('a' => 1, 'b' => 2, 'c' => 3, 'd' => 4, 'e' => 5);

echo
json_encode($arr);
?>

Результат выполнения данного примера:

{"a":1,"b":2,"c":3,"d":4,"e":5}

Пример #2 Пример использования json_encode() с опциями

<?php
$a
= array('<foo>',"'bar'",'"baz"','&blong&', "\xc3\xa9");

echo
"Обычно: ", json_encode($a), "\n";
echo
"Теги: ", json_encode($a, JSON_HEX_TAG), "\n";
echo
"Апострофы: ", json_encode($a, JSON_HEX_APOS), "\n";
echo
"Кавычки: ", json_encode($a, JSON_HEX_QUOT), "\n";
echo
"Амперсанды: ", json_encode($a, JSON_HEX_AMP), "\n";
echo
"Юникод: ", json_encode($a, JSON_UNESCAPED_UNICODE), "\n";
echo
"Все: ", json_encode($a, JSON_HEX_TAG | JSON_HEX_APOS | JSON_HEX_QUOT | JSON_HEX_AMP | JSON_UNESCAPED_UNICODE), "\n\n";

$b = array();

echo
"Отображение пустого массива как массива: ", json_encode($b), "\n";
echo
"Отображение неассоциативного массива как объекта: ", json_encode($b, JSON_FORCE_OBJECT), "\n\n";

$c = array(array(1,2,3));

echo
"Отображение неассоциативного массива как массива: ", json_encode($c), "\n";
echo
"Отображение неассоциативного массива как объекта: ", json_encode($c, JSON_FORCE_OBJECT), "\n\n";

$d = array('foo' => 'bar', 'baz' => 'long');

echo
"Ассоциативный массив всегда отображается как объект: ", json_encode($d), "\n";
echo
"Ассоциативный массив всегда отображается как объект: ", json_encode($d, JSON_FORCE_OBJECT), "\n\n";
?>

Результат выполнения данного примера:

Обычно: ["<foo>","'bar'","\"baz\"","&blong&","\u00e9"]
Теги: ["\u003Cfoo\u003E","'bar'","\"baz\"","&blong&","\u00e9"]
Апострофы: ["<foo>","\u0027bar\u0027","\"baz\"","&blong&","\u00e9"]
Кавычки: ["<foo>","'bar'","\u0022baz\u0022","&blong&","\u00e9"]
Амперсанды: ["<foo>","'bar'","\"baz\"","\u0026blong\u0026","\u00e9"]
Юникод: ["<foo>","'bar'","\"baz\"","&blong&","é"]
Все: ["\u003Cfoo\u003E","\u0027bar\u0027","\u0022baz\u0022","\u0026blong\u0026","é"]

Отображение пустого массива как массива: []
Отображение неассоциативного массива как объекта: {}

Отображение неассоциативного массива как массива: [[1,2,3]]
Отображение неассоциативного массива как объекта: {"0":{"0":1,"1":2,"2":3}}

Ассоциативный массив всегда отображается как объект: {"foo":"bar","baz":"long"}
Ассоциативный массив всегда отображается как объект: {"foo":"bar","baz":"long"}

Пример #3 Пример использования опции JSON_NUMERIC_CHECK

<?php
echo "Строки, содержащие числа преобразуются в числа".PHP_EOL;
$numbers = array('+123123', '-123123', '1.2e3', '0.00001');
var_dump(
$numbers,
json_encode($numbers, JSON_NUMERIC_CHECK)
);
echo
"Строки, содержащие некорректно заданные числа".PHP_EOL;
$strings = array('+a33123456789', 'a123');
var_dump(
$strings,
json_encode($strings, JSON_NUMERIC_CHECK)
);
?>

Результатом выполнения данного примера будет что-то подобное:

Строки, содержащие числа преобразуются в числа
array(4) {
  [0]=>
  string(7) "+123123"
  [1]=>
  string(7) "-123123"
  [2]=>
  string(5) "1.2e3"
  [3]=>
  string(7) "0.00001"
}
string(28) "[123123,-123123,1200,1.0e-5]"
Строки, содержащие некорректно заданные числа
array(2) {
  [0]=>
  string(13) "+a33123456789"
  [1]=>
  string(4) "a123"
}
string(24) "["+a33123456789","a123"]"

Пример #4 Пример с последовательными индексами, начинающимися с нуля, и непоследовательными индексами массивов

<?php
echo "Последовательный массив".PHP_EOL;
$sequential = array("foo", "bar", "baz", "blong");
var_dump(
$sequential,
json_encode($sequential)
);

echo
PHP_EOL."Непоследовательный массив".PHP_EOL;
$nonsequential = array(1=>"foo", 2=>"bar", 3=>"baz", 4=>"blong");
var_dump(
$nonsequential,
json_encode($nonsequential)
);

echo
PHP_EOL."Последовательный массив с одним удалённым индексом".PHP_EOL;
unset(
$sequential[1]);
var_dump(
$sequential,
json_encode($sequential)
);
?>

Результат выполнения данного примера:

Последовательный массив
array(4) {
  [0]=>
  string(3) "foo"
  [1]=>
  string(3) "bar"
  [2]=>
  string(3) "baz"
  [3]=>
  string(5) "blong"
}
string(27) "["foo","bar","baz","blong"]"

Непоследовательный массив
array(4) {
  [1]=>
  string(3) "foo"
  [2]=>
  string(3) "bar"
  [3]=>
  string(3) "baz"
  [4]=>
  string(5) "blong"
}
string(43) "{"1":"foo","2":"bar","3":"baz","4":"blong"}"

Последовательный массив с одним удалённым индексом
array(3) {
  [0]=>
  string(3) "foo"
  [2]=>
  string(3) "baz"
  [3]=>
  string(5) "blong"
}
string(33) "{"0":"foo","2":"baz","3":"blong"}"

Пример #5 Пример использования опции JSON_PRESERVE_ZERO_FRACTION

<?php
var_dump
(json_encode(12.0, JSON_PRESERVE_ZERO_FRACTION));
var_dump(json_encode(12.0));
?>

Результат выполнения данного примера:

string(4) "12.0"
string(2) "12"

Примечания

Замечание:

в случае возникновения ошибки кодирования можно использовать json_last_error() для определения точной ошибки.

Замечание:

При кодировании массива в случае, если его индексы не являются последовательными числами от нуля, то все индексы кодируются в строковые ключи для каждой пары индекс-значение.

Замечание:

Как и эталонный кодировщик JSON, json_encode() будет создавать JSON в виде простого значения (то есть не объект и не массив), если ему переданы типы string, int, float или bool в качестве входящего значения value. Большинство декодеров воспринимают эти значения как правильный JSON, но некоторые нет, потому что спецификация неоднозначна на этот счёт.

Всегда проверяйте, что ваш декодер JSON может правильно обрабатывать данные, которые вы создаёте с помощью json_encode().

Смотрите также

add a note

User Contributed Notes 16 notes

up
100
bohwaz
11 years ago
Are you sure you want to use JSON_NUMERIC_CHECK, really really sure?

Just watch this usecase:

<?php
// International phone number
json_encode(array('phone_number' => '+33123456789'), JSON_NUMERIC_CHECK);
?>

And then you get this JSON:

{"phone_number":33123456789}

Maybe it makes sense for PHP (as is_numeric('+33123456789') returns true), but really, casting it as an int?!

So be careful when using JSON_NUMERIC_CHECK, it may mess up with your data!
up
3
elliseproduction at gmail dot com
11 months ago
Notice that JSON_FORCE_OBJECT will convert all non-associative arrays to objects. This is not necessarily a good solution for empty arrays.
If you want to convert only empty arrays to objects, simply convert them to empty object before use json_encode function.

For example:

<?php

$foo
=array(
'empty2object'=>(object)[],
'empty2array'=>[],
);

echo
json_encode($foo); // {"empty2object":{},"empty2array":[]}

?>
up
9
Istratov Vadim
14 years ago
Be careful with floating values in some locales (e.g. russian) with comma (",") as decimal point. Code:

<?php
setlocale
(LC_ALL, 'ru_RU.utf8');

$arr = array('element' => 12.34);
echo
json_encode( $arr );
?>

Output will be:
--------------
{"element":12,34}
--------------

Which is NOT a valid JSON markup. You should convert floating point variable to strings or set locale to something like "LC_NUMERIC, 'en_US.utf8'" before using json_encode.
up
5
ryan at ryanparman dot com
13 years ago
I came across the "bug" where running json_encode() over a SimpleXML object was ignoring the CDATA. I ran across http://bugs.php.net/42001 and http://bugs.php.net/41976, and while I agree with the poster that the documentation should clarify gotchas like this, I was able to figure out how to workaround it.

You need to convert the SimpleXML object back into an XML string, then re-import it back into SimpleXML using the LIBXML_NOCDATA option. Once you do this, then you can use json_encode() and still get back the CDATA.

<?php
// Pretend we already have a complex SimpleXML object stored in $xml
$json = json_encode(new SimpleXMLElement($xml->asXML(), LIBXML_NOCDATA));
?>
up
2
ck at ergovia dot de
10 years ago
Attention when passing a plain array to json_encode and using JSON_FORCE_OBJECT. It figured out that the index-order of the resulting JSON-string depends on the system PHP is running on.

$a = array("a" , "b", "c");
echo json_encode($a, JSON_FORCE_OBJECT);

On Xampp (Windows) you get:

{"0":"a","1":"b","2":"c"}';

On a machine running debian I get:

{"2":"a","1":"b","0":"c"}';

Note that the key:value pairs are different!

Solution here was to use array_combine to create a ssociative array and then pass it to json_encode:

json_encode(array_combine(range(0, count($a) - 1), $a), JSON_FORCE_OBJECT);
up
6
guilhenfsu at gmail dot com
10 years ago
Solution for UTF-8 Special Chars.

<?

$array = array('nome'=>'Paição','cidade'=>'São Paulo');

$array = array_map('htmlentities',$array);

//encode
$json = html_entity_decode(json_encode($array));

//Output: {"nome":"Paição","cidade":"São Paulo"}
echo $json;

?>
up
4
Sam Barnum
14 years ago
Note that if you try to encode an array containing non-utf values, you'll get null values in the resulting JSON string. You can batch-encode all the elements of an array with the array_map function:
<?php
$encodedArray
= array_map(utf8_encode, $rawArray);
?>
up
2
Walter Tross
7 years ago
If you need pretty-printed output, but want it indented by 2 spaces instead of 4:

$json_indented_by_4 = json_encode($output, JSON_UNESCAPED_SLASHES|JSON_PRETTY_PRINT);
$json_indented_by_2 = preg_replace('/^( +?)\\1(?=[^ ])/m', '$1', $json_indented_by_4);
up
0
polygon dot co dot in at gmail dot com
24 days ago
JSON Encode Huge Data with minimum Memory footprint.

<?php
/**
* Creates JSON
*
* This class is built to avoid creation of large array objects
* (which leads to memory limit issues for larger data set)
* which are then converted to JSON. This class gives access to
* create JSON in parts for what ever smallest part of data
* we have of the large data set which are yet to be fetched.
*/
class JsonEncode
{
/**
* Array of JsonEncodeObject objects
*
* @var array
*/
private $objects = [];

/**
* Current JsonEncodeObject object
*
* @var object
*/
private $currentObject = null;

/**
* JsonEncode constructor
*/
public function __construct()
{

}

/**
* Escape the json string key or value
*
* @param string $str json key or value string.
* @return string
*/
private function escape($str)
{
if (
is_null($str)) return 'null';
$escapers = array("\\", "/", "\"", "\n", "\r", "\t", "\x08", "\x0c");
$replacements = array("\\\\", "\\/", "\\\"", "\\n", "\\r", "\\t", "\\f", "\\b");
$str = str_replace($escapers, $replacements, $str);
return
'"' . $str . '"';
}

/**
* Encodes both simple and associative array to json
*
* @param $arr string value escaped and array value json_encode function is applied.
* @return void
*/
public function encode($arr)
{
if (
$this->currentObject) {
echo
$this->currentObject->comma;
}
if (
is_array($arr)) {
echo
json_encode($arr);
} else {
echo
$this->escape($arr);
}
if (
$this->currentObject) {
$this->currentObject->comma = ',';
}
}

/**
* Add simple array/value as in the json format.
*
* @param $value data type is string/array. This is used to add value/array in the current Array.
* @return void
*/
public function addValue($value)
{
if (
$this->currentObject->mode !== 'Array') {
throw new
Exception('Mode should be Array');
}
$this->encode($value);
}

/**
* Add simple array/value as in the json format.
*
* @param string $key key of associative array
* @param $value data type is string/array. This is used to add value/array in the current Array.
* @return void
*/
public function addKeyValue($key, $value)
{
if (
$this->currentObject->mode !== 'Assoc') {
throw new
Exception('Mode should be Assoc');
}
echo
$this->currentObject->comma;
echo
$this->escape($key) . ':';
$this->currentObject->comma = '';
$this->encode($value);
}

/**
* Start simple array
*
* @param string $key Used while creating simple array inside an associative array and $key is the key.
* @return void
*/
public function startArray($key = null)
{
if (
$this->currentObject) {
echo
$this->currentObject->comma;
array_push($this->objects, $this->currentObject);
}
$this->currentObject = new JsonEncodeObject('Array');
if (!
is_null($key)) {
echo
$this->escape($key) . ':';
}
echo
'[';
}

/**
* End simple array
*
* @return void
*/
public function endArray()
{
echo
']';
$this->currentObject = null;
if (
count($this->objects)>0) {
$this->currentObject = array_pop($this->objects);
$this->currentObject->comma = ',';
}
}

/**
* Start simple array
*
* @param string $key Used while creating associative array inside an associative array and $key is the key.
* @return void
*/
public function startAssoc($key = null)
{
if (
$this->currentObject) {
echo
$this->currentObject->comma;
array_push($this->objects, $this->currentObject);
}
$this->currentObject = new JsonEncodeObject('
up
1
Garrett
14 years ago
A note about json_encode automatically quoting numbers:

It appears that the json_encode function pays attention to the data type of the value. Let me explain what we came across:

We have found that when retrieving data from our database, there are occasions when numbers appear as strings to json_encode which results in double quotes around the values.

This can lead to problems within javascript functions expecting the values to be numeric.

This was discovered when were were retrieving fields from the database which contained serialized arrays. After unserializing them and sending them through the json_encode function the numeric values in the original array were now being treated as strings and showing up with double quotes around them.

The fix: Prior to encoding the array, send it to a function which checks for numeric types and casts accordingly. Encoding from then on worked as expected.
up
-1
jakepucan at gmail dot com
2 years ago
It's also worth mentioning that adding charset is fine.

<?php
header
('Content-type:application/json;charset=utf-8');
json_encode(['name' => 'Jake', 'country' => 'Philippines']);
up
-1
pvl dot kolensikov at gmail dot com
12 years ago
As json_encode() is recursive, you can use it to serialize whole structure of objects.

<?php
class A {
public
$a = 1;
public
$b = 2;
public
$collection = array();

function
__construct(){
for (
$i=3; $i-->0;){
array_push($this->collection, new B);
}
}
}

class
B {
public
$a = 1;
public
$b = 2;
}

echo
json_encode(new A);
?>

Will give:

{
"a":1,
"b":2,
"collection":[{
"a":1,
"b":2
},{
"a":1,
"b":2
},{
"a":1,
"b":2
}]
}
up
-3
Nick
7 years ago
Please note that there was an (as of yet) undocumented change to the json_encode() function between 2 versions of PHP with respect to JSON_PRETTY_PRINT:

In version 5.4.21 and earlier, an empty array [] using JSON_PRETTY_PRINT would be rendered as 3 lines, with the 2nd one an empty (indented) line, i.e.:
"data": [

],

In version 5.4.34 and above, an empty array [] using JSON_PRETTY_PRINT would be rendered as exactly [] at the spot where it occurs, i.e.
"data: [],

This is not mentioned anywhere in the PHP changelist and migration documentations; neither on the json_encode documentation page.

This is very useful to know when you are parsing the JSON using regular expressions to manually insert portions of data, as is the case with my current use-case (working with JSON exports of over several gigabytes requires sub-operations and insertion of data).
up
-1
DimeCadmium
1 year ago
> While most decoders will accept these values as valid JSON, some may not, as the specification is ambiguous on this point.

The specification (https://datatracker.ietf.org/doc/html/rfc8259#section-2) is not ambiguous, whether you look at RFC8259, go back to RFC7159 or 7158 or 4627, look at (either edition of) ECMA-404, or even at JSON.org.

The original RFC - from 16 years ago, mind you - specified that the root level of JSON text could only be a object or array.

Literally every other standard - from as long as 9 years ago (RFC7158 and ECMA-404 1st Ed.) and as recent as 5 years ago (RFC8259 and ECMA-404 2nd Ed., both current standards) - makes explicit that any value can appear at the root.
up
-4
spam.goes.in.here AT gmail.com
15 years ago
For anyone who has run into the problem of private properties not being added, you can simply implement the IteratorAggregate interface with the getIterator() method. Add the properties you want to be included in the output into an array in the getIterator() method and return it.
up
-3
mikko dot rantalainen at peda dot net
2 years ago
Notice that <?php $json = json_encode($x, JSON_FORCE_OBJECT); ?> doesn't guarantee that $json is actually an object encoded with JSON syntax. It *only* guarantees that the output doesn't start with "[".

For example:
<?php
json_encode
("foo", JSON_FORCE_OBJECT); # "foo"
json_encode(42, JSON_FORCE_OBJECT); # 42
json_encode(false, JSON_FORCE_OBJECT); # false
json_encode("false", JSON_FORCE_OBJECT); # "false"
json_encode(10/3, JSON_FORCE_OBJECT); # 3.3333333333333335
?>
To Top