PHP 8.3.4 Released!

imagefilledpolygon

(PHP 4, PHP 5, PHP 7, PHP 8)

imagefilledpolygonРисование закрашенного многоугольника

Описание

Сигнатура, начиная с PHP 8.0.0 (не поддерживается с именованными аргументами)

imagefilledpolygon(GdImage $image, array $points, int $color): bool

Альтернативный синтаксис (объявлен устаревшим с PHP 8.1.0)

imagefilledpolygon(
    GdImage $image,
    array $points,
    int $num_points,
    int $color
): bool

imagefilledpolygon() создаёт закрашенный многоугольник в заданном изображении image.

Список параметров

image

Объект GdImage, который возвращает одна из функций, создающих изображения, например, imagecreatetruecolor().

points

Массив, содержащий x и y координаты последовательных вершин многоугольника.

num_points

Общее число точек (вершин), должно быть не меньше 3.

Если этот параметр опущен (смотрите альтернативный синтаксис), то массив points должен содержать чётное количество элементов и num_points будет вычислено как count($points)/2.
color

Идентификатор цвета, созданный функцией imagecolorallocate().

Возвращаемые значения

Возвращает true в случае успешного выполнения или false в случае ошибки.

Список изменений

Версия Описание
8.1.0 Параметр num_points объявлен устаревшим.
8.0.0 Параметр image теперь ожидает экземпляр класса GdImage; раньше параметр ждал корректный gd-ресурс (resource).

Примеры

Пример #1 Пример использования imagefilledpolygon()

<?php
// задание массива точек для многоугольника
$values = array(
40, 50, // Point 1 (x, y)
20, 240, // Point 2 (x, y)
60, 60, // Point 3 (x, y)
240, 20, // Point 4 (x, y)
50, 40, // Point 5 (x, y)
10, 10 // Point 6 (x, y)
);

// создание изображения
$image = imagecreatetruecolor(250, 250);

// определение цветов
$bg = imagecolorallocate($image, 0, 0, 0);
$blue = imagecolorallocate($image, 0, 0, 255);

// заливка фона
imagefilledrectangle($image, 0, 0, 249, 249, $bg);

// рисование многоугольника
imagefilledpolygon($image, $values, 6, $blue);

// вывод изображения
header('Content-type: image/png');
imagepng($image);
imagedestroy($image);
?>

Вывод приведённого примера будет похож на:

Вывод примера: imagefilledpolygon()

Смотрите также

add a note

User Contributed Notes 9 notes

up
1
tatlar at yahoo dot com
17 years ago
<?php function _makeFiveSidedStar( $x, $y, $radius, $shape='polygon', $spiky=NULL ) {
// $x, $y co-ords of origin (in pixels), $radius (in pixels), $shape - 'polygon' or 'star', $spikiness - ratio between 0 and 1
$point = array() ;
$angle = 360 / 5 ;
$point[0]['x'] = $x ;
$point[0]['y'] = $y - $radius ;
$point[2]['x'] = $x + ( $radius * cos( deg2rad( 90 - $angle ) ) ) ;
$point[2]['y'] = $y - ( $radius * sin( deg2rad( 90 - $angle ) ) ) ;
$point[4]['x'] = $x + ( $radius * sin( deg2rad( 180 - ( $angle*2 ) ) ) ) ;
$point[4]['y'] = $y + ( $radius * cos( deg2rad( 180 - ( $angle*2 ) ) ) ) ;
$point[6]['x'] = $x - ( $radius * sin( deg2rad( 180 - ( $angle*2 ) ) ) ) ;
$point[6]['y'] = $y + ( $radius * cos( deg2rad( 180 - ( $angle*2 ) ) ) ) ;
$point[8]['x'] = $x - ( $radius * cos( deg2rad( 90 - $angle ) ) ) ;
$point[8]['y'] = $y - ( $radius * sin( deg2rad( 90 - $angle ) ) ) ;
if(
$shape == 'star' ) {
if(
$spiky == NULL ) $spiky = 0.5 ; // default to 0.5
$indent = $radius * $spiky ;
$point[1]['x'] = $x + ( $indent * cos( deg2rad( 90 - $angle/2 ) ) ) ;
$point[1]['y'] = $y - ( $indent * sin( deg2rad( 90 - $angle/2 ) ) ) ;
$point[3]['x'] = $x + ( $indent * sin( deg2rad( 180 - $angle ) ) ) ;
$point[3]['y'] = $y - ( $indent * cos( deg2rad( 180 - $angle ) ) ) ;
$point[5]['x'] = $x ;
$point[5]['y'] = $y + ( $indent * sin( deg2rad( 180 - $angle ) ) ) ;
$point[7]['x'] = $x - ( $indent * sin( deg2rad( 180 - $angle ) ) ) ;
$point[7]['y'] = $y - ( $indent * cos( deg2rad( 180 - $angle ) ) ) ;
$point[9]['x'] = $x - ( $indent * cos( deg2rad( 90 - $angle/2 ) ) ) ;
$point[9]['y'] = $y - ( $indent * sin( deg2rad( 90 - $angle/2 ) ) ) ;
}
ksort( $point ) ;
$coords = array() ; // new array
foreach( $point as $pKey=>$pVal ) {
if(
is_array( $pVal ) ) {
foreach(
$pVal as $pSubKey=>$pSubVal ) {
if( !empty(
$pSubVal ) ) array_push( $coords, $pSubVal ) ;
}
}
}
return
$coords ;
}
$values = _makeFiveSidedStar( 100, 100, 50, 'star' ) ;
// Put values into imagepolygon function. You need to define the $image and $color, and flush it out to an image type.?>
up
0
martin at eksperimentrum dot dk
5 years ago
How to draw a simple 6-sided star img where x,y is center of the star and s is the size:

function drawStar($img, $x, $y, $s, $color) {
$x=$x-$s/2;
$y=$y-$s/4;
$points=array($x,$y, $x+$s/2,$y+$s, $x+$s,$y);
imagefilledpolygon($img, $points, 3, $color);
$points=array($x,2/3*$s+$y, $x+$s/2,$y-$s/3, $x+$s,2/3*$s+$y);
imagefilledpolygon($img, $points, 3, $color);
}
up
0
Steween
6 years ago
My version of drawStar (with examples)

<?php
header
("Content-type: image/png");

/* drawStar or regular polygon
$x, $y -> Position in the image
$radius -> Radius of the star
$spikes -> Number of spikes (min 2)
$ratio -> Ratio between outer and inner points
$dir -> Rotation 270° for having an up spike( with ratio<1)
*/
function drawStar($x, $y, $radius, $spikes=5, $ratio=0.5, $dir=270) {
$coordinates = array();
$angle = 360 / $spikes ;
for(
$i=0; $i<$spikes; $i++){
$coordinates[] = $x + ( $radius * cos(deg2rad($dir+$angle*$i)));
$coordinates[] = $y + ( $radius * sin(deg2rad($dir+$angle*$i)));
$coordinates[] = $x + ($ratio*$radius * cos(deg2rad($dir+$angle*$i + $angle/2)));
$coordinates[] = $y + ($ratio*$radius * sin(deg2rad($dir+$angle*$i + $angle/2)));
}
return
$coordinates ;
}

// 14*20+24*2 = 328 Examples
$im = imagecreate(800,600);
imagecolorallocate($im, 0, 0, 0);
$w = imagecolorallocate($im, 255, 255, 255);
$r = imagecolorallocate($im, 255, 0, 0);
for (
$spikes=2; $spikes<16; $spikes++) { //[2-15]
for ($ratio=1; $ratio<21; $ratio++) { //[0.1-2.0]
$values = drawStar(40*$ratio-20, $spikes*40-60, 10, $spikes, $ratio/10);
imagefilledpolygon($im, $values, count($values)/2, ($ratio % 5 == 0) ? $r : $w);
}
}
for (
$dir=0; $dir<24; $dir++) {
$values = drawStar(30*$dir+20, 580, 10, 2, 1.5, $dir*15);
imagefilledpolygon($im, $values, count($values)/2, $w);
$values = drawStar(30*$dir+20, 580, 10, 2, 0.2, $dir*15);
imagefilledpolygon($im, $values, count($values)/2, $r);
}
imagepng($im);
imagedestroy($im);
?>
up
0
rbenheidorn at gmail dot com
9 years ago
Discovered while working on printing geographical boundaries to an image: if you provide floating point vertices, then the decimal value is automatically truncated. This can cause images drawn with floating point vertices to shift slightly towards the top-left corner. My personal resolution is to round all of the vertices to their nearest whole values, which eliminates this shift.
up
0
austinoblouk at yahoo dot com
14 years ago
Actually the minimum it allows is 3. It says "Total number of vertices, which must be bigger than 3." but it allows 3...
up
0
webmaster at mywebsolution dot de
16 years ago
Just thought that 'tatlar at yahoo dot com's function has some redundant code in it, so I tried to "improve" it. Now you can choose a variable number of spikes.

<?php
error_reporting
(E_ALL);
function
drawStar($x, $y, $radius, $spikes=5) {
// $x, $y -> Position in the image
// $radius -> Radius of the star
// $spikes -> Number of spikes

$coordinates = array();
$angel = 360 / $spikes ;

// Get the coordinates of the outer shape of the star
$outer_shape = array();
for(
$i=0; $i<$spikes; $i++){
$outer_shape[$i]['x'] = $x + ($radius * cos(deg2rad(270 - $angel*$i)));
$outer_shape[$i]['y'] = $y + ($radius * sin(deg2rad(270 - $angel*$i)));
}

// Get the coordinates of the inner shape of the star
$inner_shape = array();
for(
$i=0; $i<$spikes; $i++){
$inner_shape[$i]['x'] = $x + (0.5*$radius * cos(deg2rad(270-180 - $angel*$i)));
$inner_shape[$i]['y'] = $y + (0.5*$radius * sin(deg2rad(270-180 - $angel*$i)));
}

// Bring the coordinates in the right order
foreach($inner_shape as $key => $value){
if(
$key == (floor($spikes/2)+1))
break;
$inner_shape[] = $value;
unset(
$inner_shape[$key]);
}

// Reset the keys
$i=0;
foreach(
$inner_shape as $value){
$inner_shape[$i] = $value;
$i++;
}

// "Merge" outer and inner shape
foreach($outer_shape as $key => $value){
$coordinates[] = $outer_shape[$key]['x'];
$coordinates[] = $outer_shape[$key]['y'];
$coordinates[] = $inner_shape[$key]['x'];
$coordinates[] = $inner_shape[$key]['y'];
}

// Return the coordinates
return $coordinates ;
}

// Example
$spikes = 5;

$values = drawStar(250, 250, 200, $spikes);
$im = imagecreate(500,500);
imagecolorallocate($im,0,0,0);
$w = imagecolorallocate($im, 255, 255, 255);
imagefilledpolygon($im, $values, $spikes*2, $w);
imageGIF($im);
imagedestroy($im);
?>
up
0
jylyn at hotmail dot com
17 years ago
In spite of what it says about requiring more than 3 vertices, it is possible to draw a triangle with this function!
up
0
etnekor at tar dot hu
18 years ago
There is a simple function to draw a filled point with a chosen radius and color.

<?php
function drawPoint($img, $radius, $origo_x, $origo_y, $pointColor)
{
for (
$i=0;$i<=360;$i++)
{
$pont[] = $origo_x + ($radius * sin(deg2rad($i)));
$pont[] = $origo_y - ($radius * cos(deg2rad($i)));
}
reset($pont);
ImageFilledPolygon ($img, $pont, (sizeof($pont)/2), $pointColor);
}
?>
up
-2
Arnapou
16 years ago
I discovered that the GD imagefilledpolygon function is incorrect for some drawing with transparent color (for example red 50% : RGBA = 255, 0, 0, 64).

I tried to draw a complex form with lots of points really near (1 pixel of distance) and a transparent red.

The problem was : some border pixels were not drawn by the imagefilledpolygon but were drawn with imagepolygon !?!?

So I wrote my own imagefilledpolygon function which work very well in all case I tested.

<?php
// $points should be an array of coordinates like that :
$points = array(
array(
0, 0),
array(
100, 50),
array(
90, 100),
array(
50, 50),
array(
70, 30),
array(
10, 10),
);
?>

<?php
function myimagefilledpolygon(& $img, $points, $color) {
$scanline = 99999;
// compute edges
$all_edges = array();
$n = count($points);
for(
$i=0; $i<$n; $i++) {
$p1 = $points[$i];
if (
$i == $n-1) { $p2 = $points[0]; } else { $p2 = $points[$i+1]; }
$x1 = $p1[0]; $y1 = $p1[1];
$x2 = $p2[0]; $y2 = $p2[1];
if (
$y1 != $y2) {
$invslope = ($x2 - $x1)/($y2 - $y1);
if (
$y1 < $y2 ) {
$ymin = $y1;
$xval = $x1;
$ymax = $y2;
} else {
$ymin = $y2;
$xval = $x2;
$ymax = $y1;
}
$all_edges[] = array($ymin, $ymax, $xval, $invslope);
if (
$ymin < $scanline) { $scanline = $ymin; }
} else {
if (
$y1 < $scanline) { $scanline = $y1; }
if (
$y2 < $scanline) { $scanline = $y2; }
}
}
// draw
$active = array();
do {
// add edges to active array
$tmp = array();
$n = count($all_edges);
for(
$i=0; $i<$n; $i++) {
if (
$all_edges[$i][0] == $scanline) {
$active[] = $all_edges[$i];
} else {
$tmp[] = $all_edges[$i];
}
}
$all_edges = $tmp;
// remove previous edges from active array
$tmp = array();
$n = count($active);
for(
$i=0; $i<$n; $i++) {
if (
$active[$i][1] > $scanline) {
$tmp[] = $active[$i];
}
}
$active = $tmp;
// sort active tab
$n = count($active);
for(
$i=0; $i<$n-1; $i++) {
$min = $i;
for(
$k=$i+1; $k<$n; $k++) {
if (
$active[$k][2] < $active[$min][2]) { $min = $k; }
}
if (
$i != $min) {
$tmp = $active[$i];
$active[$i] = $active[$min];
$active[$min] = $tmp;
}
}
// draw
$n = count($active);
for(
$i=0; $i<$n; $i+=2) {
if (
$i+1 < $n) {
if (
$tmp[$i][2] == $active[$i+1][2]) {
imagesetpixel($img, round($active[$i][2]), $scanline, $color);
} else {
imageline($img, round($active[$i][2]), $scanline, round($active[$i+1][2]), $scanline, $color);
}
}
}
// increment x values
$n = count($active);
for(
$i=0; $i<$n; $i++) { $active[$i][2] += $active[$i][3]; }
$scanline++;
} while (
count($all_edges) + count($active) > 0);
}
?>
To Top