$_SERVER

(PHP 4 >= 4.1.0, PHP 5, PHP 7, PHP 8)

$_SERVERInformationen über Server und Ausführungsumgebung

Beschreibung

$_SERVER ist ein Array, das Informationen wie Header, Pfade und die verschiedenen Wege, das Skript anzusprechen beinhaltet. Die Einträge in diesem Array werden vom Webserver erstellt, weshalb es keine Garantie dafür gibt, dass jeder Webserver alle diese Einträge unterstützt - Server können einige weglassen oder andere Einträge unterstützen, die hier nicht aufgeführt sind. Die meisten dieser Variablen werden jedoch in der » CGI/1.1-Spezifikation ausgewiesen und sind wahrscheinlich definiert.

Hinweis: Wenn PHP auf der Kommandozeile läuft, sind die meisten dieser Einträge nicht verfügbar oder haben keine Bedeutung.

Zusätzlich zu den unten aufgelisteten Elementen erstellt PHP weitere Elemente mit Werten aus Anfrage-Headern. Diese Einträge erhalten die Bezeichnung HTTP_, gefolgt vom Namen des Headers in Großbuchstaben und mit Unterstrichen anstelle von Bindestrichen. Zum Beispiel wäre der Accept-Language-Header als $_SERVER['HTTP_ACCEPT_LANGUAGE'] verfügbar.

Indizes

'PHP_SELF'
Der Dateiname des aktuell ausgeführten Skripts, relativ zum Document-Root. Beispielsweise enthält $_SERVER['PHP_SELF'] in einem Skript, das über die Adresse http://example.com/foo/bar.php aufgerufen wird, den Wert /foo/bar.php. Die Konstante __FILE__ enthält den vollständigen Pfad und Dateinamen der aktuellen (z. B. via include eingebundenen) Datei. Falls PHP als Kommandozeilenprogramm läuft, enthält diese Variable den Namen des Skripts.
'argv'
Das Array der an das Skript übergebenen Argumente. Wenn das Skript auf der Kommandozeile ausgeführt wird, ermöglicht dies den Zugriff auf die Kommandozeilenparameter im C-Stil. Wird das Skript via GET aufgerufen, enthält die Variable den Querystring.
'argc'
Enthält die Anzahl der per Kommandozeile an das Skript übergebenen Parameter (sofern das Skript auf der Kommandozeile ausgeführt wird).
'GATEWAY_INTERFACE'
Enthält die Version der vom Server verwendete CGI-Spezifikation, z. B. 'CGI/1.1'.
'SERVER_ADDR'
Die IP-Adresse des Servers, auf dem das aktuelle Skript ausgeführt wird.
'SERVER_NAME'
Der Hostname des Servers, auf dem das aktuelle Skript ausgeführt wird. Wenn das Skript auf einem virtuellen Host läuft, wird dieser Wert vom virtuellen Host bestimmt.

Hinweis: Unter Apache 2 müssen UseCanonicalName = On und ServerName gesetzt werden. Ansonsten reflektiert dieser Wert den Hostnamen, der vom Client gesendet wurde und vorgetäuscht werden kann. Es ist nicht sicher, sich in einem sicherheitsabhängigen Umfeld auf diesen Wert zu verlassen.

'SERVER_SOFTWARE'
Die Identifikation der verwendeten Server-Software, die bei einer Antwort auf den eingegangenen Request verwendet wird.
'SERVER_PROTOCOL'
Der Name und die Versionsnummer des verwendeten Übertragungsprotokolls, mittels dessen die aktuelle Seite aufgerufen wurde, z. B. 'HTTP/1.0'.
'REQUEST_METHOD'
Die Requestmethode, die verwendet wurde, um die Seite aufzurufen; z. B. 'GET', 'HEAD', 'POST', 'PUT'.

Hinweis:

Ist die Requestmethode HEAD, wird ein PHP-Skript beendet, nachdem die Header gesendet wurden (sofern Ausgaben ohne die Verwendung des Ausgabepuffers (output buffering) erzeugt werden).

'REQUEST_TIME'
Der Timestamp des Zeitpunkts, an dem der Request eintraf.
'REQUEST_TIME_FLOAT'
Der Timestamp des Zeitpunkts, an dem der Request eintraf, in Mikrosekunden-Genauigkeit.
'QUERY_STRING'
Sofern vorhanden, der Querystring, mittels dessen auf die Seite zugegriffen wurde.
'DOCUMENT_ROOT'
Das Document-Root-Verzeichnis, unter dem das aktuelle Skript ausgeführt wird, so wie es in der Konfiguration des Servers festgelegt wurde.
'HTTPS'
Wird auf einen nicht-leeren Wert gesetzt, wenn das Skript via HTTPS aufgerufen wurde.
'REMOTE_ADDR'
Die IP-Adresse, von der aus der Benutzer die aktuelle Seite ansieht.
'REMOTE_HOST'
Der Name des Hosts, von dem aus der Benutzer die aktuelle Seite ansieht. Der Auflösung der IP-Adresse (Reverse DNS Lookup) basiert auf der REMOTE_ADDR des Benutzers.

Hinweis: Der Webserver muss so konfiguriert sein, dass er diese Variable erzeugt. Zum Beispiel muss bei Apache in der httpd.conf die Direktive HostnameLookups On gesetzt werden, damit sie existiert. Siehe auch gethostbyaddr().

'REMOTE_PORT'
Der vom Rechner des Benutzers verwendete Port, um mit dem Webserver zu kommunizieren.
'REMOTE_USER'
Der beglaubigte Benutzer.
'REDIRECT_REMOTE_USER'
Der beglaubigte Benutzer, falls der Request intern weitergeleitet wurde.
'SCRIPT_FILENAME'

Der absolute Pfad des aktuell ausgeführten Skripts.

Hinweis:

Wenn ein Skript als CLI mit einem relativen Pfad wie file.php oder ../file.php ausgeführt wird, enthält $_SERVER['SCRIPT_FILENAME'] den vom Benutzer angegebenen relativen Pfad.

'SERVER_ADMIN'
Der Wert, der für die SERVER_ADMIN-Direktive (für Apache) im Konfigurationsfile des Webservers eingestellt wurde. Wenn das Skript auf einem Virtuellen Host läuft, wird der für diesen Virtuellen Host definierte Wert verwendet.
'SERVER_PORT'
Der Port, der auf dem Server vom Webserver für die Kommunikation genutzt wird. In einer Standardumgebung ist dies '80'; wenn Sie beispielsweise SSL verwenden, wird dieser Wert auf den Port geändert, über den Sie Ihre verschlüsselte HTTP-Kommunikation abwickeln.

Hinweis: Unter Apache 2 müssen UseCanonicalName = On sowie UseCanonicalPhysicalPort = On gesetzt werden, um den physikalischen (wirklichen) Port zu erhalten; andernfalls kann dieser Wert gefälscht werden und gibt dann den Wert des physikalischen Ports zurück oder auch nicht. Es ist nicht sicher, sich in einem sicherheitsabhängigen Umfeld auf diesen Wert zu verlassen.

'SERVER_SIGNATURE'
Ein String, der die Version der verwendeten Serversoftware und den Namen des Virtuellen Hosts enthält, der, sofern die Option auf dem Server aktiviert ist, an die servergenerierten Seiten angefügt wird.
'PATH_TRANSLATED'
Auf dem Dateisystem (nicht dem Document-Root!) basierender Pfad zum aktuellen Skript, nachdem der Server ein Virtual-to-Real-Mapping durchgeführt hat.

Hinweis: Apache 2-Benutzer können die Direktive AcceptPathInfo = On in der httpd.conf verwenden, um einen Wert für PATH_INFO zu definieren.

'SCRIPT_NAME'
Enthält den Pfad zum aktuellen Skript. Dies ist nützlich für Seiten, die auf sich selbst verweisen sollen. Die Konstante __FILE__ enthält den vollständigen Pfad und Dateinamen der aktuellen (z. B. via include eingebundenen) Datei.
'REQUEST_URI'
Der URI, der angegeben wurde, um auf die aktuelle Seite zuzugreifen, beispielsweise '/index.html'.
'PHP_AUTH_DIGEST'
Wenn die Digest HTTP Authentication verwendet wird, wird diese Variable mit dem Inhalt des vom Client gesendeten 'Authorization'-Headers gefüllt, welchen Sie für eine adäquate Validierung nutzen sollten.
'PHP_AUTH_USER'
Wenn die HTTP Authentication verwendet wird, wird diese Variable mit dem vom Benutzer angegebenen Usernamen gefüllt.
'PHP_AUTH_PW'
Wenn die HTTP Authentication verwendet wird, wird diese Variable mit dem vom Benutzer angegebenen Passwort gefüllt.
'AUTH_TYPE'
Wenn die HTTP Authentication verwendet wird, wird diese Variable mit dem verwendeten HTTP-Authentifizierungsmechanismus gefüllt.
'PATH_INFO'
Enthält, sofern vorhanden, den Teil des Pfadnamens hinter dem Namen des PHP-Skripts, aber vor dem Query-String. Wenn zum Beispiel das aktuelle Skript mittels dem URI http://www.example.com/php/path_info.php/some/stuff?foo=bar aufgerufen wird, würde $_SERVER['PATH_INFO'] /some/stuff enthalten.
'ORIG_PATH_INFO'
Originalversion von 'PATH_INFO' vor der Verarbeitung durch PHP.

Beispiele

Beispiel #1 $_SERVER-Beispiel

<?php
echo $_SERVER['SERVER_NAME'];
?>

Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

www.example.com

Anmerkungen

Hinweis:

Dies ist eine 'Superglobale' oder automatisch globale Variable. Dies bedeutet, dass sie innerhalb des Skripts in jedem Geltungsbereich sichtbar ist. Es ist nicht nötig, sie mit global $variable bekannt zu machen, um aus Funktionen oder Methoden darauf zuzugreifen.

add a note

User Contributed Notes 39 notes

up
153
Vladimir Kornea
15 years ago
1. All elements of the $_SERVER array whose keys begin with 'HTTP_' come from HTTP request headers and are not to be trusted.

2. All HTTP headers sent to the script are made available through the $_SERVER array, with names prefixed by 'HTTP_'.

3. $_SERVER['PHP_SELF'] is dangerous if misused. If login.php/nearly_arbitrary_string is requested, $_SERVER['PHP_SELF'] will contain not just login.php, but the entire login.php/nearly_arbitrary_string. If you've printed $_SERVER['PHP_SELF'] as the value of the action attribute of your form tag without performing HTML encoding, an attacker can perform XSS attacks by offering users a link to your site such as this:

<a href='http://www.example.com/login.php/"><script type="text/javascript">...</script><span a="'>Example.com</a>

The javascript block would define an event handler function and bind it to the form's submit event. This event handler would load via an <img> tag an external file, with the submitted username and password as parameters.

Use $_SERVER['SCRIPT_NAME'] instead of $_SERVER['PHP_SELF']. HTML encode every string sent to the browser that should not be interpreted as HTML, unless you are absolutely certain that it cannot contain anything that the browser can interpret as HTML.
up
54
vcoletti at tiscali dot it
4 years ago
To list all the $_SERVER parameters, simply do:

foreach ($_SERVER as $parm => $value) echo "$parm = '$value'\n";

No need to list all possible keys of the array.
up
38
MarkAgius at markagius dot co dot uk
13 years ago
You have missed 'REDIRECT_STATUS'

Very useful if you point all your error pages to the same file.

File; .htaccess
# .htaccess file.

ErrorDocument 404 /error-msg.php
ErrorDocument 500 /error-msg.php
ErrorDocument 400 /error-msg.php
ErrorDocument 401 /error-msg.php
ErrorDocument 403 /error-msg.php
# End of file.

File; error-msg.php
<?php
$HttpStatus
= $_SERVER["REDIRECT_STATUS"] ;
if(
$HttpStatus==200) {print "Document has been processed and sent to you.";}
if(
$HttpStatus==400) {print "Bad HTTP request ";}
if(
$HttpStatus==401) {print "Unauthorized - Iinvalid password";}
if(
$HttpStatus==403) {print "Forbidden";}
if(
$HttpStatus==500) {print "Internal Server Error";}
if(
$HttpStatus==418) {print "I'm a teapot! - This is a real value, defined in 1998";}

?>
up
37
Lord Mac
14 years ago
An even *more* improved version...

<?php
phpinfo
(32);
?>
up
25
jonbarnett at gmail dot com
15 years ago
It's worth noting that $_SERVER variables get created for any HTTP request headers, including those you might invent:

If the browser sends an HTTP request header of:
X-Debug-Custom: some string

Then:

<?php
$_SERVER
['HTTP_X_DEBUG_CUSTOM']; // "some string"
?>

There are better ways to identify the HTTP request headers sent by the browser, but this is convenient if you know what to expect from, for example, an AJAX script with custom headers.

Works in PHP5 on Apache with mod_php. Don't know if this is true from other environments.
up
23
pierstoval at example dot com
7 years ago
As PHP $_SERVER var is populated with a lot of vars, I think it's important to say that it's also populated with environment vars.

For example, with a PHP script, we can have this:

MY_ENV_VAR=Hello php -r 'echo $_SERVER["MY_ENV_VAR"];'

Will show "Hello".

But, internally, PHP makes sure that "internal" keys in $_SERVER are not overriden, so you wouldn't be able to do something like this:

REQUEST_TIME=Hello php -r 'var_dump($_SERVER["REQUEST_TIME"]);'

Will show something like 1492897785

However, a lot of vars are still vulnerable from environment injection.

I created a gist here ( https://gist.github.com/Pierstoval/f287d3e61252e791a943dd73874ab5ee ) with my PHP configuration on windows with PHP7.0.15 on WSL with bash, the results are that the only "safe" vars are the following:

PHP_SELF
SCRIPT_NAME
SCRIPT_FILENAME
PATH_TRANSLATED
DOCUMENT_ROOT
REQUEST_TIME_FLOAT
REQUEST_TIME
argv
argc

All the rest can be overriden with environment vars, which is not very cool actually because it can break PHP applications sometimes...

(and I only tested on CLI, I had no patience to test with Apache mod_php or Nginx + PHP-FPM, but I can imagine that not a lot of $_SERVER properties are "that" secure...)
up
13
chris at ocproducts dot com
7 years ago
Guide to absolute paths...

Data: __FILE__
Data type: String
Purpose: The absolute pathname of the running PHP file, including the filename.
Caveat: This is not the file called by the PHP processor, it's what is running. So if you are inside an include, it's the include.
Caveat: Symbolic links are pre-resolved, so don't trust comparison of paths to be accurate.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: Yes

Data: __DIR__
Data type: String
Purpose: The absolute pathname to the running PHP file, excluding the filename
Caveat: This is not the file called by the PHP processor, it's what is running. So if you are inside an include, it's the include.
Caveat: Symbolic links are pre-resolved, so don't trust comparison of paths to be accurate.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: Yes

Data: $_SERVER['SCRIPT_FILENAME']
Data type: String
Purpose: The absolute pathname of the origin PHP file, including the filename
Caveat: Not set on all PHP environments, may need setting by copying from __FILE__ before other files are included.
Caveat: Symbolic links are not pre-resolved, use PHP's 'realpath' function if you need it resolved.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Caveat: "Filename" makes you think it is just a filename, but it really is the full absolute pathname. Read the identifier as "Script's filesystem (path)name".
Works on web mode: Yes
Works on CLI mode: Yes

Data: $_SERVER['PATH_TRANSLATED']
Data type: String
Purpose: The absolute pathname of the origin PHP file, including the filename
Caveat: It's probably not set, best to just not use it. Just use realpath($_SERVER['SCRIPT_FILENAME']) (and be aware that itself may need to have been emulated).
Caveat: Symbolic links are pre-resolved, so don't trust comparison of paths to be accurate.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['DOCUMENT_ROOT']
Data type: String
Purpose: Get the absolute path to the web server's document root. No trailing slash.
Caveat: Don't trust this to be set, or set correctly, unless you control the server environment.
Caveat: May or may not have symbolic links pre-resolved, use PHP's 'realpath' function if you need it resolved.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: No

Note that if something is not set it may be missing from $_SERVER, or it may be blank, so use PHP's 'empty' function for your test.

Note that if you call "php --info" on the command line then naturally some of these settings are going to be blank, as no PHP file is involved.
up
21
Richard York
15 years ago
Not documented here is the fact that $_SERVER is populated with some pretty useful information when accessing PHP via the shell.

["_SERVER"]=>
array(24) {
["MANPATH"]=>
string(48) "/usr/share/man:/usr/local/share/man:/usr/X11/man"
["TERM"]=>
string(11) "xterm-color"
["SHELL"]=>
string(9) "/bin/bash"
["SSH_CLIENT"]=>
string(20) "127.0.0.1 41242 22"
["OLDPWD"]=>
string(60) "/Library/WebServer/Domains/www.example.com/private"
["SSH_TTY"]=>
string(12) "/dev/ttys000"
["USER"]=>
string(5) "username"
["MAIL"]=>
string(15) "/var/mail/username"
["PATH"]=>
string(57) "/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin"
["PWD"]=>
string(56) "/Library/WebServer/Domains/www.example.com/www"
["SHLVL"]=>
string(1) "1"
["HOME"]=>
string(12) "/Users/username"
["LOGNAME"]=>
string(5) "username"
["SSH_CONNECTION"]=>
string(31) "127.0.0.1 41242 10.0.0.1 22"
["_"]=>
string(12) "/usr/bin/php"
["__CF_USER_TEXT_ENCODING"]=>
string(9) "0x1F5:0:0"
["PHP_SELF"]=>
string(10) "Shell.php"
["SCRIPT_NAME"]=>
string(10) "Shell.php"
["SCRIPT_FILENAME"]=>
string(10) "Shell.php"
["PATH_TRANSLATED"]=>
string(10) "Shell.php"
["DOCUMENT_ROOT"]=>
string(0) ""
["REQUEST_TIME"]=>
int(1247162183)
["argv"]=>
array(1) {
[0]=>
string(10) "Shell.php"
}
["argc"]=>
int(1)
}
up
12
ywarnier at beeznest dot org
7 years ago
Note that $_SERVER['REQUEST_URI'] might include the scheme and domain in certain cases.

This happens, for example, when calling the page through a call to stream_context_create() with a HTTP header of 'request_fulluri' set to 1.

For example:

$http = ['request_fulluri' => 1, /* other params here */];
$context = stream_context_create(array( 'http' => $http ));
$fp = fopen($some_url, 'rb', false, $context);

When outputting $_SERVER['REQUEST_URI'] on the server at $some_url, you will get
https://some_url/some_script.php

Remove the request_fulluri => 1 option, and $_SERVER['REQUEST_URI'] gets back to its "normal":
/some_script.php

Apparently, request_fulluri is useful when using some proxy servers.

In this case, there is no proper way to "detect" if this option was set or not, and you should probably use a combination of other $_SERVER[] elements (like REQUEST_SCHEME, SERVER_NAME and SERVER_PORT) to determine if this was the case.

One quick (and improvable) way to detect it would be to compare the start of the REQUEST_URI with REQUEST_SCHEME:

$scheme = $_SERVER['REQUEST_SCHEME'] . '://';
if (strcmp(substr($_SERVER['REQUEST_URI'], 0, strlen($scheme)), $scheme) === 0) {
// request_fulluri was set
}
up
15
krinklemail at gmail dot com
11 years ago
If requests to your PHP script send a header "Content-Type" or/ "Content-Length" it will, contrary to regular HTTP headers, not appear in $_SERVER as $_SERVER['HTTP_CONTENT_TYPE']. PHP removes these (per CGI/1.1 specification[1]) from the HTTP_ match group.

They are still accessible, but only if the request was a POST request. When it is, it'll be available as:
$_SERVER['CONTENT_LENGTH']
$_SERVER['CONTENT_TYPE']

[1] https://www.ietf.org/rfc/rfc3875
up
11
chris at ocproducts dot com
7 years ago
Guide to URL paths...

Data: $_SERVER['PHP_SELF']
Data type: String
Purpose: The URL path name of the current PHP file, including path-info (see $_SERVER['PATH_INFO']) and excluding URL query string. Includes leading slash.
Caveat: This is after URL rewrites (i.e. it's as seen by PHP, not necessarily the original call URL).
Works on web mode: Yes
Works on CLI mode: Tenuous (emulated to contain just the exact call path of the CLI script, with whatever exotic relative pathname you may call with, not made absolute and not normalised or pre-resolved)

Data: $_SERVER['SCRIPT_NAME']
Data type: String
Purpose: The URL path name of the current PHP file, excluding path-info and excluding URL query string. Includes leading slash.
Caveat: This is after URL rewrites (i.e. it's as seen by PHP, not necessarily the original call URL).
Caveat: Not set on all PHP environments, may need setting via preg_replace('#\.php/.*#', '.php', $_SERVER['PHP_SELF']).
Works on web mode: Yes
Works on CLI mode: Tenuous (emulated to contain just the exact call path of the CLI script, with whatever exotic relative pathname you may call with, not made absolute and not normalised or pre-resolved)

Data: $_SERVER['REDIRECT_URL']
Data type: String
Purpose: The URL path name of the current PHP file, path-info is N/A and excluding URL query string. Includes leading slash.
Caveat: This is before URL rewrites (i.e. it's as per the original call URL).
Caveat: Not set on all PHP environments, and definitely only ones with URL rewrites.
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['REQUEST_URI']
Data type: String
Purpose: The URL path name of the current PHP file, including path-info and including URL query string. Includes leading slash.
Caveat: This is before URL rewrites (i.e. it's as per the original call URL). *
*: I've seen at least one situation where this is not true (there was another $_SERVER variable to use instead supplied by the URL rewriter), but the author of the URL rewriter later fixed it so probably fair to dismiss this particular note.
Caveat: Not set on all PHP environments, may need setting via $_SERVER['REDIRECT_URL'] . '?' . http_build_query($_GET) [if $_SERVER['REDIRECT_URL'] is set, and imperfect as we don't know what GET parameters were originally passed vs which were injected in the URL rewrite] --otherwise-- $_SERVER['PHP_SELF'] . '?' . http_build_query($_GET).
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['PATH_INFO']
Data type: String
Purpose: Find the path-info, which is data after the .php filename in the URL call. It's a strange concept.
Caveat: Some environments may not support it, it is best avoided unless you have complete server control
Works on web mode: Yes
Works on CLI mode: No

Note that if something is not set it may be missing from $_SERVER, or it may be blank, so use PHP's 'empty' function for your test.
up
10
Tonin
16 years ago
When using the $_SERVER['SERVER_NAME'] variable in an apache virtual host setup with a ServerAlias directive, be sure to check the UseCanonicalName apache directive. If it is On, this variable will always have the apache ServerName value. If it is Off, it will have the value given by the headers sent by the browser.

Depending on what you want to do the content of this variable, put in On or Off.
up
4
lemonostif at gmail dot com
5 years ago
PHP_SELF is a disgrace of a programmer's work. One of the most widespread PHP vulnerabilities since version 4 and the manual says nothing about the dangers. At least clarify that ITS VALUE CAN BE PROVIDED BY THE USER with capitals preferably if you want to make the internet a safer place...
up
2
Daniels118
2 years ago
If you need to know the protocol (http or https) used by the client, then the $_SERVER['HTTPS'] variable may not actually report the truth if your server is behind a proxy or a load balancer (In fact the client could connect to the load balancer using https, and then the load balancer forward the request to the server using http).
If the proxy/load balancer is correctly configured it could send the original request protocol in a header, and you will find it in the $_SERVER[HTTP_X_FORWARDED_PROTO] variable.
up
7
info at mtprod dot com
15 years ago
On Windows IIS 7 you must use $_SERVER['LOCAL_ADDR'] rather than $_SERVER['SERVER_ADDR'] to get the server's IP address.
up
7
Stefano (info at sarchittu dot org)
13 years ago
A way to get the absolute path of your page, independent from the site position (so works both on local machine and on server without setting anything) and from the server OS (works both on Unix systems and Windows systems).

The only parameter it requires is the folder in which you place this script
So, for istance, I'll place this into my SCRIPT folder, and I'll write SCRIPT word length in $conflen

<?php
$conflen
=strlen('SCRIPT');
$B=substr(__FILE__,0,strrpos(__FILE__,'/'));
$A=substr($_SERVER['DOCUMENT_ROOT'], strrpos($_SERVER['DOCUMENT_ROOT'], $_SERVER['PHP_SELF']));
$C=substr($B,strlen($A));
$posconf=strlen($C)-$conflen-1;
$D=substr($C,1,$posconf);
$host='http://'.$_SERVER['SERVER_NAME'].'/'.$D;
?>

$host will finally contain the absolute path.
up
12
steve at sc-fa dot com
15 years ago
If you are serving from behind a proxy server, you will almost certainly save time by looking at what these $_SERVER variables do on your machine behind the proxy.

$_SERVER['HTTP_X_FORWARDED_FOR'] in place of $_SERVER['REMOTE_ADDR']

$_SERVER['HTTP_X_FORWARDED_HOST'] and
$_SERVER['HTTP_X_FORWARDED_SERVER'] in place of (at least in our case,) $_SERVER['SERVER_NAME']
up
6
jarrod at squarecrow dot com
15 years ago
$_SERVER['DOCUMENT_ROOT'] is incredibly useful especially when working in your development environment. If you're working on large projects you'll likely be including a large number of files into your pages. For example:

<?php
//Defines constants to use for "include" URLS - helps keep our paths clean

define("REGISTRY_CLASSES", $_SERVER['DOCUMENT_ROOT']."/SOAP/classes/");
define("REGISTRY_CONTROLS", $_SERVER['DOCUMENT_ROOT']."/SOAP/controls/");

define("STRING_BUILDER", REGISTRY_CLASSES. "stringbuilder.php");
define("SESSION_MANAGER", REGISTRY_CLASSES. "sessionmanager.php");
define("STANDARD_CONTROLS", REGISTRY_CONTROLS."standardcontrols.php");
?>

In development environments, you're rarely working with your root folder, especially if you're running PHP locally on your box and using DOCUMENT_ROOT is a great way to maintain URL conformity. This will save you hours of work preparing your application for deployment from your box to a production server (not to mention save you the headache of include path failures).
up
4
Mark Simon
5 years ago
So near, and yet so far …

$_SERVER has nearly everything you need to know about the current web page environment. Something which would have been handy is easy access to the protocol and the actual web root.

For the protocol, you may or may not have $_SERVER['HTTPS'] and it may or may not be empty. For the web root, $_SERVER['DOCUMENT_ROOT'] depends on the server configuration, and doesn’t work for virtual hosts.

For practical purposes, I normally include something like the following in my scripts:

<?php
// Web Root
// Usage: include("$root/includes/something.inc.php");
$root = $_SERVER['WEB_ROOT'] = str_replace($_SERVER['SCRIPT_NAME'],'',$_SERVER['SCRIPT_FILENAME']);

// Host & Protocol
// Usage: $url = "$protocol://$host/images/something.jpg";
$host = $_SERVER['HTTP_HOST'];
$protocol=$_SERVER['PROTOCOL'] = isset($_SERVER['HTTPS']) && !empty($_SERVER['HTTPS']) ? 'https' : 'http';
?>
up
5
php at isnoop dot net
14 years ago
Use the apache SetEnv directive to set arbitrary $_SERVER variables in your vhost or apache config.

SetEnv varname "variable value"
up
1
lilJoshu
5 years ago
Remember,

Although $_SERVER["REQUEST_METHOD"] is initially built with GET, POST, PUT, HEAD in mind, a server can allow more.

This may be important if you're building a RESTful interfaces that will also use methods such as PATCH and DELETE.

Also important as a security risk as a possible point of injection. In the event of building something acting based on REQUEST_METHOD, it's recommended to put it in a switch statement.

<?php
switch ($_SERVER["REQUEST_METHOD"]){
case
"PUT":
foo_replace_data();
break;
case
"POST":
foo_add_data();
break;
case
"HEAD";
foo_set_that_cookie();
break;
case
"GET":
default:
foo_fetch_stuff()
break;
}

?>
up
5
chris
15 years ago
A table of everything in the $_SERVER array can be found near the bottom of the output of phpinfo();
up
3
pomat at live dot it
11 years ago
$_SERVER['DOCUMENT_ROOT'] may contain backslashes on windows systems, and of course it may or may not have a trailing slash (backslash).
I saw the following as an example of the proper way we're supposed to deal with this issue:

<?php
include(dirname($_SERVER['DOCUMENT_ROOT']) . DIRECTORY_SEPARATOR . 'file.php');
?>

Ok, the latter may be used to access a file inside the parent directory of the document root, but actually does not properly address the issue.
In the end, don't warry about. It should be safe to use forward slashes and append a trailing slash in all cases.
Let's say we have this:

<?php
$path
= 'subdir/file.php';
$result = $_SERVER['DOCUMENT_ROOT'] . '/' . $path;
?>

On linux $result might be something like
1) "/var/www/subdir/file.php"
2) "/var/www//subdir/file.php"
String 2 is parsed the same as string 1 (have a try with command 'cd').

On windows $result might be something like
1) "C:/apache/htdocs/subdir/file.php"
2) "C:/apache/htdocs//subdir/file.php"
3) "C:\apache\htdocs/subdir/file.php"
4) "C:\apache\htdocs\/subdir/file.php"
All those strings are parsed as "C:\apache\htdocs\subdir\file.php" (have a try with 'cd').
up
3
Tom
12 years ago
Be warned that most contents of the Server-Array (even $_SERVER['SERVER_NAME']) are provided by the client and can be manipulated. They can also be used for injections and thus MUST be checked and treated like any other user input.
up
0
kamil00110
1 year ago
This code can be used to help find somone that tries to dig throught the server files to find something.

.htaccess

ErrorDocument 404 /your.php
ErrorDocument 403 /your.php

<?php
//get time
$time = date("H:i:s d.m.y");
//get user address
$usr = $_SERVER['REMOTE_ADDR'];
//get entered url of the "visitor"
$url = $_SERVER['REQUEST_URI'];
//get your servers address
$ip = $_SERVER['SERVER_ADDR'];
//put toogether
$sus = "[".$time."] ".$usr." ".$ip.$url.PHP_EOL;
//write an log file
file_put_contents("susip.txt", $sus, FILE_APPEND);
?>
up
3
silverquick at gmail dot com
16 years ago
I think the HTTPS element will only be present under Apache 2.x. It's not in the list of "special" variables here:
http://httpd.apache.org/docs/1.3/mod/mod_rewrite.html#RewriteCond
But it is here:
http://httpd.apache.org/docs/2.0/mod/mod_rewrite.html#rewritecond
up
4
mirko dot steiner at slashdevslashnull dot de
14 years ago
<?php

// RFC 2616 compatible Accept Language Parser
// http://www.ietf.org/rfc/rfc2616.txt, 14.4 Accept-Language, Page 104
// Hypertext Transfer Protocol -- HTTP/1.1

foreach (explode(',', $_SERVER['HTTP_ACCEPT_LANGUAGE']) as $lang) {
$pattern = '/^(?P<primarytag>[a-zA-Z]{2,8})'.
'(?:-(?P<subtag>[a-zA-Z]{2,8}))?(?:(?:;q=)'.
'(?P<quantifier>\d\.\d))?$/';

$splits = array();

printf("Lang:,,%s''\n", $lang);
if (
preg_match($pattern, $lang, $splits)) {
print_r($splits);
} else {
echo
"\nno match\n";
}
}

?>

example output:

Google Chrome 3.0.195.27 Windows xp

Lang:,,de-DE''
Array
(
[0] => de-DE
[primarytag] => de
[1] => de
[subtag] => DE
[2] => DE
)
Lang:,,de;q=0.8''
Array
(
[0] => de;q=0.8
[primarytag] => de
[1] => de
[subtag] =>
[2] =>
[quantifier] => 0.8
[3] => 0.8
)
Lang:,,en-US;q=0.6''
Array
(
[0] => en-US;q=0.6
[primarytag] => en
[1] => en
[subtag] => US
[2] => US
[quantifier] => 0.6
[3] => 0.6
)
Lang:,,en;q=0.4''
Array
(
[0] => en;q=0.4
[primarytag] => en
[1] => en
[subtag] =>
[2] =>
[quantifier] => 0.4
[3] => 0.4
)
up
2
picov at e-link dot it
12 years ago
A simple function to detect if the current page address was rewritten by mod_rewrite:

<?php
public function urlWasRewritten() {
$realScriptName=$_SERVER['SCRIPT_NAME'];
$virtualScriptName=reset(explode("?", $_SERVER['REQUEST_URI']));
return !(
$realScriptName==$virtualScriptName);
}
?>
up
3
pudding06 at gmail dot com
15 years ago
Here's a simple, quick but effective way to block unwanted external visitors to your local server:

<?php
// only local requests
if ($_SERVER['REMOTE_ADDR'] !== '127.0.0.1') die(header("Location: /"));
?>

This will direct all external traffic to your home page. Of course you could send a 404 or other custom error. Best practice is not to stay on the page with a custom error message as you acknowledge that the page does exist. That's why I redirect unwanted calls to (for example) phpmyadmin.
up
0
sammyhacker at gmail dot com
3 years ago
To put it simply, $_SERVER contains all the environment variables.

CGI works by an HTTP application server filling in all the required environment variables and invoking the PHP process. And these environment variables are stored under $_SERVER.
up
1
jit_chavan at yahoo dot com
10 years ago
searched $_SERVER["REDIRECT_URL"] for a while and noted that it is not mentioned in php documentation page itself. look like this is only generated by apache server(not others) and using $_SERVER["REQUEST_URI"] will be useful in some cases as mine.
up
0
centurianii at yahoo dot co dot uk
7 years ago
If you apply redirection in ALL your requests using commands at the Apache virtual host file like:
RewriteEngine On
RewriteCond "%{REQUEST_URI}" "!=/index.php"
RewriteRule "^/(.*)$" "index.php?$1" [NC,NE,L,QSA]
you should expect some deviations in your $_SERVER global.

Say, you send a url of: [hostname here]/a/b?x=1&y=2
which makes Apache to modify to: /index.php?/a/b?x=1&y=2

Now your $_SERVER global contains among others:
'REQUEST_URI' => '/a/b?x=1&y=2', it retains the initial url after the host
'QUERY_STRING' => 'a/b&x=1&y=2', notice how php replaces '?' with '&'
'SCRIPT_NAME' => '/index.php', as it was intended to be.

To test your $_SERVER global:
function serverArray(){
$arr = array();
foreach($_SERVER as $key=>$value)
$arr[] = '&nbsp;&nbsp;&nbsp;\'' . $key . '\' => \'' . (isset($value)? $value : '-') . '\'';
return @\sort($arr)? '$_SERVER = array(<br />' . implode($arr, ',<br />') . '<br />);' : false;
}
echo serverArray();
up
-1
plugwash at p10link dot net
9 years ago
Be aware that it's a bad idea to access x-forwarded-for and similar headers through this array. The header names are mangled when populating the array and this mangling can introduce spoofing vulnerabilities.

See http://en.wikipedia.org/wiki/User:Brion_VIBBER/Cool_Cat_incident_report for details of a real world exploit of this.
up
-2
2962051004 at qq dot com
6 years ago
<?php
/*
Sometimes you will find that your website will not get the correct user IP after adding CDN, then this function will help you
*/
function real_ip()
{
$ip = $_SERVER['REMOTE_ADDR'];
if (isset(
$_SERVER['HTTP_X_FORWARDED_FOR']) && preg_match_all('#\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}#s', $_SERVER['HTTP_X_FORWARDED_FOR'], $matches)) {
foreach (
$matches[0] AS $xip) {
if (!
preg_match('#^(10|172\.16|192\.168)\.#', $xip)) {
$ip = $xip;
break;
}
}
} elseif (isset(
$_SERVER['HTTP_CLIENT_IP']) && preg_match('/^([0-9]{1,3}\.){3}[0-9]{1,3}$/', $_SERVER['HTTP_CLIENT_IP'])) {
$ip = $_SERVER['HTTP_CLIENT_IP'];
} elseif (isset(
$_SERVER['HTTP_CF_CONNECTING_IP']) && preg_match('/^([0-9]{1,3}\.){3}[0-9]{1,3}$/', $_SERVER['HTTP_CF_CONNECTING_IP'])) {
$ip = $_SERVER['HTTP_CF_CONNECTING_IP'];
} elseif (isset(
$_SERVER['HTTP_X_REAL_IP']) && preg_match('/^([0-9]{1,3}\.){3}[0-9]{1,3}$/', $_SERVER['HTTP_X_REAL_IP'])) {
$ip = $_SERVER['HTTP_X_REAL_IP'];
}
return
$ip;

}
echo
real_ip();

?>
up
-1
wbeaumo1 at gmail dot com
14 years ago
Don't forget $_SERVER['HTTP_COOKIE']. It contains the raw value of the 'Cookie' header sent by the user agent.
up
-2
chris at ocproducts dot com
7 years ago
Guide to script parameters...

Data: $_GET
Data type: Array (map)
Purpose: Contains all GET parameters (i.e. a parsed URL query string).
Caveat: GET parameter names have to be compliant with PHP variable naming, e.g. dots are not allowed and get substituted.
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['QUERY_STRING']
Data type: String
Purpose: Gets an unparsed URL query string.
Caveat: Not set on all PHP environments, may need setting via http_build_query($_GET).
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['argv']
Data type: Array (list)
Purpose: Get CLI call parameters.
Works on web mode: Tenuous (just contains a single parameter, the query string)
Works on CLI mode: Yes
up
-3
Johan Winge
4 years ago
It should probably be noted that the value of $_SERVER['SERVER_PROTOCOL'] will never contain the substring "HTTPS". Assuming this is a common source of bugs and confusion. Instead, see $_SERVER['HTTPS'].
up
-4
cupy at email dot cz
15 years ago
Tech note:
$_SERVER['argc'] and $_SERVER['argv'][] has some funny behaviour,
used from linux (bash) commandline, when called like
"php ./script_name.php 0x020B"
there is everything correct, but
"./script_name.php 0x020B"
is not correct - "0" is passed instead of "0x020B" as $_SERVER['argv'][1] - see the script below.
Looks like the parameter is not passed well from bash to PHP.
(but, inspected on the level of bash, 0x020B is understood well as $1)

try this example:

------------->8------------------
cat ./script_name.php
#! /usr/bin/php

if( $_SERVER['argc'] == 2)
{
// funny... we have to do this trick to pass e.g. 0x020B from parameters
// ignore this: "PHP Notice: Undefined offset: 2 in ..."
$EID = $_SERVER['argv'][1] + $_SERVER['argv'][2] + $_SERVER['argv'][3];
}
else
{ // default
$EID = 0x0210; // PPS failure
}
up
-5
DanielTahar
4 years ago
To expand a bit on the price you could pay for relying on 'HTTP_REFERER': several large news sites I read often have paywalls, with cookies in place so you can only read X articles before you must subscribe; if using Incognito, they count the number of times you accessed via the same IP; everything to get you to subscribe. However, in order to be appealing, any visit where the 'HTTP_REFERER' is Google News will give you the entire article. I'm sure it's a dilemma their webmasters have, but for now any time someone sends you a story on one of them, all you have to do is search for the title and click the result from Google News. Bottom line: never count on it.

PS (1): ofcourse i'm talking about a friend. I pay for content.
PS (2): after some debate, the RFC decided to keep 'HTTP_REFERER', although it's misspelled.
To Top