PHP 8.4.0 RC2 available for testing

reset

(PHP 4, PHP 5, PHP 7, PHP 8)

resetRemet le pointeur interne de tableau au début

Description

reset(array|object &$array): mixed

reset() replace le pointeur de tableau array au premier élément et retourne la valeur du premier élément.

Liste de paramètres

array

Le tableau d'entrée.

Valeurs de retour

Retourne la valeur du premier élément du tableau, ou false si le tableau est vide.

Avertissement

Cette fonction peut retourner false, mais elle peut aussi retourner une valeur équivalent à false. Veuillez lire la section sur les booléens pour plus d'informations. Utilisez l'opérateur === pour tester la valeur de retour exacte de cette fonction.

Historique

Version Description
8.1.0 Soit convertir l'objet en un tableau en utilisant get_mangled_object_vars() d'abord, ou utiliser les méthodes fournies par une classe qui implémente Iterator, telle que ArrayIterator.
7.4.0 À partir de PHP 7.4.0, les instances de classes SPL sont traitées comme des objets vides sans propriétés au lieu d'appeler la méthode Iterator avec le même nom que cette fonction.

Exemples

Exemple #1 Exemple avec reset()

<?php

$array
= array('step one', 'step two', 'step three', 'step four');

// Par défaut, le pointeur est sur le premier élément
echo current($array) . "<br />\n"; // "step one"

// on saute deux éléments
next($array);
next($array);
echo
current($array) . "<br />\n"; // "step three"

// on remet le pointeur au début
reset($array);
echo
current($array) . "<br />\n"; // "step one"

?>

Notes

Note: La valeur retournée pour un tableau vide n'est pas distinguable de la valeur retournée pour un tableau qui contient une valeur bool false comme premier élément. Pour proprement vérifier la valeur du premier élément d'un tableau, qui peut contenir un élément false, il faut d'abord vérifier le count() du tableau, ou vérifier si la key() n'est pas null, après avoir appelé reset().

Voir aussi

  • current() - Retourne l'élément courant du tableau
  • each() - Retourne chaque paire clé/valeur d'un tableau
  • end() - Positionne le pointeur de tableau en fin de tableau
  • next() - Avance le pointeur interne d'un tableau
  • prev() - Recule le pointeur courant de tableau
  • array_key_first() - Récupère la première clé d'un tableau

add a note

User Contributed Notes 11 notes

up
55
milo at mdlwebsolutions dot com
12 years ago
GOTCHA: If your first element is false, you don't know whether it was empty or not.

<?php

$a
= array();
$b = array(false, true, true);
var_dump(reset($a) === reset($b)); //bool(true)

?>

So don't count on a false return being an empty array.
up
4
turabgarip at gmail dot com
3 years ago
Since reset() returns the first "value" of the array beside resetting its internal pointer; it will return different results when it is combined with key() or used separately. Like;

<?php

$products
= array(
'biscuits' => array('biscuit1' => 'cobis', 'biscuit2' => 'probis'),
'chocolates' => array('coco1' => 'cococ', 'coco2' => 'prococ'),
);

echo
key(reset($products['biscuits'])); // Fatal error

reset($products['biscuits']);
echo
key($products['biscuits']); // Will print 'biscuit1'

?>

This is perfectly normal because in the first method, reset() returned the first "value" of the 'biscuits' element which is to be "cbosi". So key(string) will cause a fatal error. While in the second method you just reset the array and didn't use a returning value; instead you reset the pointer and than extracted the first key of an array.

If your array has more dimensions, it won't probably cause a fatal error but you will get different results when you combine reset() and key() or use them consecutively.
up
9
Bartek Ferek
8 years ago
As for taking first key of an array, it's much more efficient to RESET and then KEY, rather then RESET result of ARRAY_KEYS (as sugested by gardnerjohng at gmail dot com).

<?php
reset
($someArray);
echo
key($someArray);
?>

This will give the same result but is much much faster. Larger arrays, better performance. Tested on 100-elements long array with 16 times faster results.
up
3
arne dot ludwig at posteo dot de
9 years ago
In response to gardnerjohng's note to retrieve the first _key_ of an array:

To retrieve the first _key_ of an array you can use the combination of reset() and key().

<?php
$properties
= array(
'colour' => 'grey',
'flavour' => 'rubber',
'name' => 'Mouse Ball',
'texture' => 'rubbery'
);

reset($properties);
echo
key($properties); // => 'colour'
?>

I prefer this solution as you don't have to create the keys array. This should (not measured) improve performance on large arrays.
up
6
Mladen Janjetovic
11 years ago
Note that you can't use pointer here. It will reset the iteration counter in this case.
foreach($array as $key=>&$value) {...}


Use standard foreach instead
foreach($array as $key=>$value) {...}
up
6
Alexandre Koriakine
18 years ago
Also it's good to reset this way the multidimentional arrays:

reset($voo2['moder']);
while (list($key, $value) = each ($voo2['moder'])) {

reset($voo2['moder'][$key]);
while (list($key1, $value1) = each ($voo2['moder'][$key])) {
#do what u want
}

}
up
5
leaetherstrip at inbox dot NOSPAMru
19 years ago
Note that reset() will not affect sub-arrays of multidimensional array.

For example,

<?php
$arr
= array(
1 => array(2,3,4,5,6),
2 => array(6,7,8,9,10)
);

while(list(
$i,) = each($arr))
{
echo
"IN \$arr[$i]<br>";

while(list(
$sub_i,$entry) = each($arr[$i]))
{
echo
"\$arr[$i][$sub_i] = $entry<br>";
}
}

reset($arr);

// Do the same again
while(list($i,) = each($arr))
{
echo
"IN \$arr[$i]<br>";

while(list(
$sub_i,$entry) = each($arr[$i]))
{
echo
"\$arr[$i][$sub_i] = $entry<br>";
}
}
?>

will print

IN $arr[1]
$arr[1][0] = 2
$arr[1][1] = 3
$arr[1][2] = 4
$arr[1][3] = 5
$arr[1][4] = 6
IN $arr[2]
$arr[2][0] = 6
$arr[2][1] = 7
$arr[2][2] = 8
$arr[2][3] = 9
$arr[2][4] = 10
IN $arr[1]
IN $arr[2]
up
2
arne dot slabbinck at duo dot be
9 years ago
Info:

Following code gives a strict warning in 5.4.45

return reset(array_keys($result['node']));

"Strict warning: Only variables should be passed by reference"

So should be:

$keys = array_keys($result['node']);
return reset($keys);
up
2
kendsnyder at gmail dot com
14 years ago
Don't use `reset()` to get the first value of an associative array. It works great for true arrays but works unexpectedly on Iterator objects. http://bugs.php.net/bug.php?id=38478
up
1
m dot lebkowski+php at gmail dot com
18 years ago
Colin, there`s a better (IMO) way to solve your problem.
<?
// ...
foreach($a as $k => &$d){} // notice the "&"
// ...
?>
It`s a new feature in PHP5 to use references in foreach loop. This way PHP isn`t making a copy of the array, so the internal pointer won`t be reset.
up
-1
Colin
18 years ago
I had a problem with PHP 5.0.5 somehow resetting a sub-array of an array with no apparent reason. The problem was in doing a foreach() on the parent array PHP was making a copy of the subarrays and in doing so it was resetting the internal pointers of the original array.

The following code demonstrates the resetting of a subarray:

<?
$a = array(
'a' => array(
'A', 'B', 'C', 'D',
),
'b' => array(
'AA', 'BB', 'CC', 'DD',
),
);

// Set the pointer of $a to 'b' and the pointer of 'b' to 'CC'
reset($a);
next($a);
next($a['b']);
next($a['b']);
next($a['b']);

var_dump(key($a['b']));
foreach($a as $k => $d)
{
}
var_dump(key($a['b']));
?>

The result of the two var dumps are 3 and 0, respectively. Clearly the internal pointer of $a['b'] was reset by doing the foreach loop over $a.

Each time the foreach loop iterated over the 'a' and 'b' keys of $a it made a copy of $a['a'] and $a['b'] into $d which resetted the internal pointers of $a['a'] and $a['b'] despite making no obvious changes.

The solution is instead to iterate over the keys of $a.

<?
foreach(array_keys($a) as $k)
{
}
?>

and using $a[$k] (or creating an alias of $a[$k] as $d and dealing with the consequences of using aliases).

For the curious, I was implementing the Iterator interface on a dummy object and calling a global object to do the actual iteration (also to cope with PHP's lack of C-style pointers which when doing a $a = $b on objects would cause the data in $a to be inconsistent with the data in $b when modified). Being that I had many dummy objects representing different data sets I chose to store each data set as a subarray contained within the global object. To make this work each dummy object has to store a key (which can freely be duplicated without problems) that it passes to the global object when rewind, key, current, next, and valid were called on the dummy object.

Unfortunately for me, my key required to be more than just a simple string or number (if it was then it could be used to directly index the subarray of data for that object and problem avoided) but was an array of strings. Instead, I had to iterate over (with a foreach loop) each subarray and compare the key to a variable stored within the subarray.

So by using a foreach loop in this manner and with PHP resetting the pointer of subarrays it ended up causing an infinite loop.

Really, this could be solved by PHP maintaining internal pointers on arrays even after copying.
To Top