PHP Conference Japan 2024

PDO::prepare

(PHP 5 >= 5.1.0, PHP 7, PHP 8, PHP 8,PECL pdo >= 0.1.0)

PDO::prepare 文を実行する準備を行い、文オブジェクトを返す

説明

public PDO::prepare(string $query, array $options = []): PDOStatement|false

PDOStatement::execute() メソッドによって実行される SQL ステートメントを準備します。 ステートメントのテンプレートは、文が実行されるときに実際の値に置き換えられる 0 個もしくはそれ以上の名前 (:name) もしくは疑問符 (?) パラメータマークを含むことができます。 名前と疑問符パラメータを同一の ステートメントのテンプレート中で使用することはできません。 どちらか一方か、他のパラメータ形式を使用してください。 ユーザーの入力をバインドする際にはこれらのパラメータを使います。 ユーザーの入力を直接クエリに含めてはいけません。

PDOStatement::execute() をコールする際には、 文に渡すパラメータにはそれぞれ固有のパラメータマークを設定する必要があります。 エミュレーションモードが有効になっていない限り、 ひとつのプリペアドステートメントの中で、同じ名前のパラメータマークを 複数使用することはできません。

注意:

パラメータマーカーが表せるのは、データリテラルだけです。 リテラルの一部やキーワード、識別子、その他のクエリのパーツをパラメータにバインドすることはできません。 たとえば、SQL 文の IN() 句などで、 ひとつのパラメータに複数の値を割り当てることはできません。

異なるパラメータを用いて複数回実行されるような文に対し PDO::prepare()PDOStatement::execute() をコールすることで、 ドライバがクライアントまたはサーバー側にクエリプランやメタ情報を キャッシュさせるよう調整するため、 アプリケーションのパフォーマンスを最適化します。また、 パラメータに手動でクオートする必要がなくなるので SQL インジェクション攻撃から保護する助けになります。

PDO は元々この機能をサポートしていないドライバに対して プリペアドステートメントとバインドパラメータをエミュレートします。 このため、ある形式をサポートしているがその他の形式をサポートしていない ドライバの場合、名前もしくは疑問符形式のパラメータを他の適当な値に 書き換えることも可能です。

注意: エミュレートされたプリペアドステートメントと、 名前パラメータやクエスチョンマークを書き換えるパーサは、[シングル|ダブル]クォート に対して標準とは異なるエスケープをサポートしています。 これによって、バックスラッシュのすぐ後にクォートで終了するクエリは そのままの形では認識されず、間違ったパラメータとして認識され、 実行されたときにプリペアドステートメントが失敗してしまいます。 回避策は、プリペアドステートメントのエミュレートをこの手のSQLクエリでは使わないようにしつつ、 ドライバによってサポートされているパラメータの書き換えを避けることです。

PHP 7.4.0 以降では、クエスチョンマークを2回続けることで、 クエスチョンマークそのものをエスケープすることができます。 これは、?? という文字列が、 クエリをデータベースに送信する時に ? に変換されるということです。

パラメータ

query

これは対象のデータベースサーバーに対して有効な SQL 文のテンプレートでなければなりません。

options

この配列は、このメソッドによって返される PDOStatement オブジェクトに対して 1 もしくはそれ以上の key=>value の組を含みます。 通常、スクロール可能なカーソルを要求するために PDO::ATTR_CURSORPDO::CURSOR_SCROLL を設定する場合に使用することになるでしょう。 いくつかのドライバには、準備する際に利用可能なドライバ固有の オプションがあります。

戻り値

もしデータベースサーバーが正常に文を準備する場合、 PDO::prepare()PDOStatement オブジェクトを返します。 もしデータベースサーバーが文を準備できなかった場合、 PDO::prepare()false を返すか PDOException を発行します (エラー処理 の方法に依存します)。

注意:

プリペアドステートメントをエミュレートする際にデータベースサーバーとの通信は行いません。 したがって PDO::prepare() はステートメントのチェックを行いません。

エラー / 例外

PDO::ATTR_ERRMODEPDO::ERRMODE_WARNING に設定されていた場合、E_WARNING レベルのエラーが発生します。

PDO::ATTR_ERRMODEPDO::ERRMODE_EXCEPTION に設定されていた場合、PDOException がスローされます。

例1 名前付きパラメータを用いて SQL ステートメントのテンプレートを準備する

<?php
/* 値の配列を渡してプリペアドステートメントを実行する */
$sql = 'SELECT name, colour, calories
FROM fruit
WHERE calories < :calories AND colour = :colour'
;
$sth = $dbh->prepare($sql, [PDO::ATTR_CURSOR => PDO::CURSOR_FWDONLY]);
$sth->execute(['calories' => 150, 'colour' => 'red']);
$red = $sth->fetchAll();
/* 配列のキーの前にも、コロン ":" を付けることができます(オプション) */
$sth->execute([':calories' => 175, ':colour' => 'yellow']);
$yellow = $sth->fetchAll();
?>

例2 疑問符パラメータを用いて SQL ステートメントのテンプレートを準備する

<?php
/* 値の配列を渡してプリペアドステートメントを実行する */
$sth = $dbh->prepare('SELECT name, colour, calories
FROM fruit
WHERE calories < ? AND colour = ?'
);
$sth->execute([150, 'red']);
$red = $sth->fetchAll();
$sth->execute([175, 'yellow']);
$yellow = $sth->fetchAll();
?>

例3 クエスチョンマークをエスケープした、SQLステートメントのテンプレート

<?php
/* 注意: 以下は PostgreSQL の場合にのみ有効です */
$sth = $dbh->prepare('SELECT * FROM issues WHERE tag::jsonb ?? ?');
$sth->execute(['feature']);
$featureIssues = $sth->fetchAll();
$sth->execute(['performance']);
$performanceIssues = $sth->fetchAll();
?>

参考

  • PDO::exec() - SQL ステートメントを実行し、作用した行数を返す
  • PDO::query() - プレースホルダを指定せずに、SQL ステートメントを準備して実行する
  • PDOStatement::execute() - プリペアドステートメントを実行する

add a note

User Contributed Notes 17 notes

up
182
Anonymous
11 years ago
To those wondering why adding quotes to around a placeholder is wrong, and why you can't use placeholders for table or column names:

There is a common misconception about how the placeholders in prepared statements work: they are not simply substituted in as (escaped) strings, and the resulting SQL executed. Instead, a DBMS asked to "prepare" a statement comes up with a complete query plan for how it would execute that query, including which tables and indexes it would use, which will be the same regardless of how you fill in the placeholders.

The plan for "SELECT name FROM my_table WHERE id = :value" will be the same whatever you substitute for ":value", but the seemingly similar "SELECT name FROM :table WHERE id = :value" cannot be planned, because the DBMS has no idea what table you're actually going to select from.

Even when using "emulated prepares", PDO cannot let you use placeholders anywhere, because it would have to work out what you meant: does "Select :foo From some_table" mean ":foo" is going to be a column reference, or a literal string?

When your query is using a dynamic column reference, you should be explicitly white-listing the columns you know to exist on the table, e.g. using a switch statement with an exception thrown in the default: clause.
up
94
Simon Le Pine
11 years ago
Hi All,

First time posting to php.net, a little nervous.

After a bunch of searching I've learned 2 things about prepared statements:
1.) It fails if you enclose in a single quote (')
This fails: "SELECT * FROM users WHERE email=':email'"
This works: "SELECT * FROM users WHERE email=:email"
2.) You cannot search with a prepared statement
This fails: "SELECT * FROM users WHERE :search=:email"
This succeeds: "SELECT * FROM users WHERE $search=:email"

In my case I allow the user to enter their username or email, determine which they've entered and set $search to "username" or "email". As this value is not entered by the user there is no potential for SQL injection and thus safe to use as I have done.

Hope that saves someone else from a lot of searching.
up
43
bg at enativ dot com
10 years ago
if you run queries in a loop, don't include $pdo->prepare() inside the loop, it will save you some resources (and time).

prepare statement inside loop:
for($i=0; $i<1000; $i++) {
$rs = $pdo->prepare("SELECT `id` FROM `admins` WHERE `groupID` = :groupID AND `id` <> :id");
$rs->execute([':groupID' => $group, ':id' => $id]);
}

// took 0.066626071929932 microseconds

prepare statement outside loop:
$rs = $pdo->prepare("SELECT `id` FROM `admins` WHERE `groupID` = :groupID AND `id` <> :id");
for($i=0; $i<1000; $i++) {
$rs->execute([':groupID' => $group, ':id' => $id]);
}

// took 0.064448118209839 microseconds

for 1,000 (simple) queries it took 0.002 microseconds less.
not much, but it worth mention.
up
58
daniel dot egeberg at gmail dot com
15 years ago
You can also pass an array of values to PDOStatement::execute(). This is also secured against SQL injection. You don't necessarily have to use bindParam() or bindValue().
up
3
theking2 at king dot ma
1 year ago
There are restrictions on the placeholder string. In the following code the first execute fails with a SQLSTATE[HY093]. It is not clear exactly what characters are allowed.

<?php declare(strict_types=1);

$db = new \PDO("mysql:hostname=localhost;dbname=minidwh", "minidwh", "Meisterstueck!");
$db->query("SET NAMES 'utf8mb4'");

$db->query("DROP TABLE IF EXISTS `äëïöüß`");
$db->query("CREATE TABLE `äëïöüß` ( `id` INT NOT NULL AUTO_INCREMENT, PRIMARY KEY (`id`) ) ENGINE = ARIA;");
$db->query("ALTER TABLE `äëïöüß` ADD COLUMN `äëïöüß` TEXT NULL");
try {
$stmt = $db->prepare("INSERT INTO `äëïöüß` (`äëïöüß`) VALUES (:äëïöüß)");
$result = $stmt->execute([':äëïöüß' => 'test1']);
} catch (
\PDOException $e) {
echo
$e->getMessage() . '<BR>';
}

try {
$stmt = $db->prepare("INSERT INTO `äëïöüß` (`äëïöüß`) VALUES (?)");
$result = $stmt->execute(['test2']);
} catch (
\PDOException $e) {
echo
$e->getMessage() . '<BR>';
}

try {
$stmt = $db->prepare("INSERT INTO `äëïöüß` (`äëïöüß`) VALUES (:column)");
$result = $stmt->execute([':column' => 'test3']);
} catch (
\PDOException $e) {
echo
$e->getMessage() . '<BR>';
}

try {
$stmt = $db->prepare("INSERT INTO `äëïöüß` (`äëïöüß`) VALUES (:column)");
$stmt->bindValue(':column', 'test4');
$result = $stmt->execute();
} catch (
\PDOException $e) {
echo
$e->getMessage() . '<BR>';
}
up
42
admin at wdfa dot co dot uk
15 years ago
Note on the SQL injection properties of prepared statements.

Prepared statements only project you from SQL injection IF you use the bindParam or bindValue option.

For example if you have a table called users with two fields, username and email and someone updates their username you might run

UPDATE `users` SET `user`='$var'

where $var would be the user submitted text.

Now if you did
<?php
$a
=new PDO("mysql:host=localhost;dbname=database;","root","");
$b=$a->prepare("UPDATE `users` SET user='$var'");
$b->execute();
?>

and the user had entered User', email='test for a test the injection would occur and the email would be updated to test as well as the user being updated to User.

Using bindParam as follows
<?php
$var
="User', email='test";
$a=new PDO("mysql:host=localhost;dbname=database;","root","");
$b=$a->prepare("UPDATE `users` SET user=:var");
$b->bindParam(":var",$var);
$b->execute();
?>

The sql would be escaped and update the username to User', email='test'
up
5
Mark Simon
7 years ago
Many students are tempted to add single quotes around string place holders in the SQL statement, since that’s what they normally do around strings in SQL and PHP.

I have to explain:

Quotes are not part of the string — they are used to construct a string in the coding language. If you are creating a string literal in SQL or PHP, then it must indeed be quoted. If the string has already been created, and is being passed on, then additional quotes would be wrong at best, and mis-interpreted at worst.

In prepared place holders, think of place holders as variables, which, whether they are strings or other values, are always written without quotes.
up
15
public at grik dot net
12 years ago
With PDO_MYSQL you need to remember about the PDO::ATTR_EMULATE_PREPARES option.

The default value is TRUE, like
$dbh->setAttribute(PDO::ATTR_EMULATE_PREPARES,true);

This means that no prepared statement is created with $dbh->prepare() call. With exec() call PDO replaces the placeholders with values itself and sends MySQL a generic query string.

The first consequence is that the call $dbh->prepare('garbage');
reports no error. You will get an SQL error during the $dbh->exec() call.
The second one is the SQL injection risk in special cases, like using a placeholder for the table name.

The reason for emulation is a poor performance of MySQL with prepared statements. Emulation works significantly faster.
up
3
Robin
14 years ago
Use prepared statements to ensure integrity of binary data during storage and retrieval. Escaping/quoting by f.e. sqlite_escape_string() or PDO::quote() is NOT suited for binary data - only for strings of text.

A simple test verifies perfect storage and retrieval with prepared statements:

<?php

$num_values
= 10000;

$db = new pdo( 'sqlite::memory:' );

$db->exec( 'CREATE TABLE data (binary BLOB(512));' );

// generate plenty of troublesome, binary data
for( $i = 0; $i < $num_values; $i++ )
{
for(
$val = null, $c = 0; $c < 512/16; $c++ )
$val .= md5( mt_rand(), true );
@
$binary[] = $val;
}

// insert each value by prepared statement
for( $i = 0; $i < $num_values; $i++ )
$db->prepare( 'INSERT INTO data VALUES (?);' )->execute( array($binary[$i]) );

// fetch the entire row
$data = $db->query( 'SELECT binary FROM data;' )->fetchAll( PDO::FETCH_COLUMN );

// compare with original array, noting any mismatch
for( $i = 0; $i < $num_values; $i++ )
if(
$data[$i] != $binary[$i] ) echo "[$i] mismatch\n";

$db = null;

?>
up
1
php dot chaska at xoxy dot net
11 years ago
Note that for Postgres, even though Postgres does support prepared statements, PHP's PDO driver NEVER sends the prepared statement to the Postgres server in advance of the call to PDO::execute().

Therefore, PDO::prepare() will never throw an error for things like faulty SQL syntax.

It also means the server will not parse and plan the SQL until the first time PDO::execute() is called, which may or may not adversely affect your optimization plans.
up
2
pbakhuis
10 years ago
Noteworthy in my opinion is that if you prepare a statement but do not bind a value to the markers it will insert null by default. e.g.
<?php
/** @var PDO $db */
$prep = $db->prepare('INSERT INTO item(title, link) VALUES(:title, :link)');
$prep->execute();
?>
Will attempt to insert null, null into the item table.
up
0
machitgarha at outlook dot com
7 years ago
Hello everyone.

I want to note that it doesn't matter where you are using a variable inside the query directly, that is not secure against SQL injections (unless performing a long security operation).

The following example is insecure against SQL injections:

<?php

$statement
= $databaseConnection->prepare("SELECT * FROM `$_POST['table']` WHERE $_POST['search_for']=:search");
$statement->bindParam(":search", $search);
$search = 18; // For example
$statement->execute();

?>

If an attacker pass '1;-- ' as input named 'search_for', he is not a very bad attacker; because he didn't delete your data! In the above example, an attacker can do anything with connected database (unless you have restricted the connected user). Unfortunately, as Simon Le Pine mentioned, you cannot use prepared statements as other parts of a query; just can be used to search in indexes.

Hope this helps from loosing some data.
Sorry for my a bit weak English!
up
1
roth at egotec dot com
18 years ago
Attention using MySQL and prepared statements.
Using a placeholder multiple times inside a statement doesn't work. PDO just translates the first occurance und leaves the second one as is.

select id,name from demo_de where name LIKE :name OR name=:name

You have to use

select id,name from demo_de where name LIKE :name OR name=:name2

and bind name two times. I don't know if other databases (for example Oracle or MSSQL) support multiple occurances. If that's the fact, then the PDO behaviour for MySQL should be changed.
up
-2
orrd101 at gmail dot com
12 years ago
Don't just automatically use prepare() for all of your queries.

If you are only submitting one query, using PDO::query() with PDO::quote() is much faster (about 3x faster in my test results with MySQL). A prepared query is only faster if you are submitting thousands of identical queries at once (with different data).

If you Google for performance comparisons you will find that this is generally consistently the case, or you can write some code and do your own comparison for your particular configuration and query scenario. But generally PDO::query() will always be faster except when submitting a large number of identical queries. Prepared queries do have the advantage of escaping the data for you, so you have to be sure to use quote() when using query().
up
-2
Hayley Watson
11 years ago
It is possible to prepare in advance several statements against a single connection. As long as that connection remains open the statements can be executed and fetched from as often as you like in any order; their "prepare-execute-fetch" steps can be interleaved in whichever way is best.

So if you're likely to be using several statements often (perhaps within a loop of transactions), you may like to consider preparing all the statements you'll be using up front.
up
-3
ak_9jsz
16 years ago
Using cursors doesn't work with SQLite 3.5.9. I get an error message when it gets to the execute() method.

Some of you might be saying "duh!" but i was surprised to see TRIGGER support in SQLite, so i had to try. :)

I wanted to use Absolute referencing on a Scrollable cursor and i only wanted one column of data. So i used this instead of a cursor.

<?php

$dbo
= new PDO('sqlite:tdb');
$sql = 'SELECT F1, F2 FROM tblA WHERE F1 <> "A";';
$res = $dbo->prepare($sql);
$res->execute();
$resColumn = $res->fetchAll(PDO::FETCH_COLUMN, 0);

for(
$r=0;$r<=3;$r++)
echo
'Row '. $r . ' returned: ' . $resColumn[$r] . "\n";

$dbo = null;
$res = null;
?>
up
-4
sgirard at rossprint dot com
15 years ago
Maybe everyone else already knows this but...

If you have a routine that prepares/executes many insert or update statements for a sqlite db then you may want to make use of the pdo transactions.

On some old hardware my query set went from 12 seconds to 1/3-1/2 second.

-sean
To Top