PHP 8.3.4 Released!

array_walk_recursive

(PHP 5, PHP 7, PHP 8)

array_walk_recursiveWendet eine Benutzerfunktion rekursiv auf jedes Element eines Arrays an

Beschreibung

array_walk_recursive(array|object &$array, callable $callback, mixed $arg = null): bool

Wendet die mittels callback angegebene Benutzerfunktion auf jedes Element von array an. Diese Funktion steigt tiefer in Arrays hinab.

Parameter-Liste

array

Das Eingabe-Array.

callback

Üblicherweise benötigt callback zwei Parameter. Der Wert von array wird als erster übergeben, und der Schlüssel/Index als zweites.

Hinweis:

Falls callback mit den tatsächlichen Werten des Arrays arbeiten muss, muss man den ersten Parameter von callback als Referenz übergeben. Dann werden alle Änderungen an den Elementen im ursprünglichen Array selbst vorgenommen.

arg

Ist der optionale Parameter arg angegeben, so wird er als dritter Parameter an die Funktion callback übergeben.

Rückgabewerte

Gibt bei Erfolg true zurück. Bei einem Fehler wird false zurückgegeben.

Beispiele

Beispiel #1 array_walk_recursive() Beispiel

<?php
$sweet
= array('a' => 'Apfel', 'b' => 'Banane');
$fruits = array('süß' => $sweet, 'sauer' => 'Zitrone');

function
test_print($item, $key)
{
echo
"$key beinhaltet $item\n";
}

array_walk_recursive($fruits, 'test_print');
?>

Das oben gezeigte Beispiel erzeugt folgende Ausgabe:

a beinhaltet Apfel
b beinhaltet Banane
sauer beinhaltet Zitrone

Sie werden bemerken, dass der Schlüssel 'süß' nicht angezeigt wird. Jeder Schlüssel, der ein array beinhaltet, wird nicht an die Funktion übergeben.

Siehe auch

  • array_walk() - Wendet eine vom Benutzer gelieferte Funktion auf jedes Element eines Arrays an

add a note

User Contributed Notes 21 notes

up
310
none at of dot your dot biz
10 years ago
Since this is only mentioned in the footnote of the output of one of the examples, I feel it should be spelled out:

* THIS FUNCTION ONLY VISITS LEAF NODES *

That is to say that if you have a tree of arrays with subarrays of subarrays, only the plain values at the leaves of the tree will be visited by the callback function. The callback function isn't ever called for a nodes in the tree that subnodes (i.e., a subarray). This has the effect as to make this function unusable for most practical situations.
up
26
r
5 years ago
How to modify external variable from inside recursive function using userdata argument.

<?php
$arr
= [
'one' => ['one_one' => 11, 'one_two' => 12],
'two' => 2
];

$counter = 0;

//Does not persist
array_walk_recursive( $arr, function($value, $key, $counter) {
$counter++;
echo
"$value : $counter";
},
$counter);
echo
"counter : $counter";

// result
// 11 : 1
// 12 : 1
// 2 : 1
// counter: 0

//Persists only in same array node
array_walk_recursive( $arr, function($value, $key, &$counter) {
$counter++;
echo
"$value : $counter";
},
$counter);

// result
// 11 : 1
// 12 : 2
// 2 : 1
// counter : 0

//Fully persistent. Using 'use' keyword
array_walk_recursive( $arr, function($value, $key) use (&$counter) {
$counter++;
echo
"$value : $counter";
},
$counter);
echo
"counter : $counter";

// result
// 11 : 1
// 12 : 2
// 2 : 3
// counter : 3
up
50
ghoffman at salientdigital dot com
12 years ago
If you are wanting to change the values of an existing multi-dimensional array, as it says above in the note, you need to specify the first argument as a reference. All that means is, be sure to precede the $item variable with an ampersand (&) as in the good_example below.

Unfortunately the PHP example given doesn't do this. It actually took me a while to figure out why my function wasn't changing the original array, even though I was passing by reference.

Here's the tip: Don't return any value from the function! Just change the value of $item that you passed in by reference. This is rather counter-intuitive since the vast majority of functions return a value.

<?php
// array_walk_recursive fails to change your array unless you pass by reference.
// Don't return values from your filter function, even though it's quite logical at a glance!
function bad_example($item,$key){
if(
$key=='test'){
return
'PHP Rocks'; // Don't do it
}else{
return
$item; // Don't do this either
}
}

// array_walk_recursive pass-by-reference example
function good_example(&$item,$key){
if(
$key=='test'){
$item='PHP Rocks'; // Do This!
}
}

$arr = array('a'=>'1','b'=>'2','test'=>'Replace This');

array_walk_recursive($arr,'bad_example');
var_dump($arr);
/**
* no errors, but prints...
* array('a'=>'1','b'=>'2','test'=>'Replace This');
*/

array_walk_recursive($arr,'good_example');
var_dump($arr);
/**
* prints...
* array('a'=>'1','b'=>'2','test'=>'PHP Rocks');
*/

?>

Returning a value from your function does work if you pass by reference and modify $item before you return, but you will eat up memory very, very fast if you try it, even on an example as small as the one here.

One other silly thing you might try first is something like this:

<?php
// Resist the urge to do this, it doesn't work.
$filtered = array_walk_recursive($unfiltered,'filter_function');
?>

Of course, $filtered is just TRUE afterwards, not the filtered results you were wanting. Oh, it ran your function recursively alright, but changed all the values in the local function scope only and returns a boolean as the documentation states.
up
17
php at genjo dot fr
9 years ago
I use RecursiveIteratorIterator with parameter CATCH_GET_CHILD to iterate on leafs AND nodes instead of array_walk_recursive function :

<?php
// Iteration on leafs AND nodes
foreach (new RecursiveIteratorIterator(new RecursiveArrayIterator($candidate), RecursiveIteratorIterator::CATCH_GET_CHILD) as $key => $value) {
echo
'My node ' . $key . ' with value ' . $value . PHP_EOL;
}
?>
up
8
bradbeattie at gmail dot com
13 years ago
The description says "If funcname needs to be working with the actual values of the array, specify the first parameter of funcname as a reference." This isn't necessarily helpful as the function you're calling might be built in (e.g. trim or strip_tags). One option would be to create a version of these like so.

<?php
function trim_by_reference(&$string) {
$string = trim($string);
}
?>

The downside to this approach is that you need to create a wrapper function for each function you might want to call. Instead, we can use PHP 5.3's inline function syntax to create a new version of array_walk_recursive.

<?php
/**
* This function acts exactly like array_walk_recursive, except that it pretends that the function
* its calling replaces the value with its result.
*
* @param $array The first value of the array will be passed into $function as the primary argument
* @param $function The function to be called on each element in the array, recursively
* @param $parameters An optional array of the additional parameters to be appeneded to the function
*
* Example usage to alter $array to get the second, third and fourth character from each value
* array_walk_recursive_referential($array, "substr", array("1","3"));
*/
function array_walk_recursive_referential(&$array, $function, $parameters = array()) {
$reference_function = function(&$value, $key, $userdata) {
$parameters = array_merge(array($value), $userdata[1]);
$value = call_user_func_array($userdata[0], $parameters);
};
array_walk_recursive($array, $reference_function, array($function, $parameters));
}
?>

The advantage here is that we only explicitly define one wrapper function instead of potentially dozens.
up
1
Dario
5 years ago
I was looking for how to change values of array since you can't pass array by reference anymore in new PHP versions, here is simple solution

<?php
array_walk_recursive
(
$myArray,
function (&
$value) {
if (
/*some condition*/) {
$value = 'New value';
}
}
);
?>

After that $myArray will be altered with new value.
up
3
CommentUser
6 years ago
The following code, which returns back a flattened array of sorts into the $results array, in newer versions of PHP raises the error "PHP Fatal error: Call-time pass-by-reference has been removed":

<?php

$results
= array();

function
example_function ($item, $key, &$arr_values)
{
$arr_values[$key] = $item;
}

array_walk_recursive($data, 'example_function', &$results);

print_r($results);

?>

This can be fixed using an anonymous function:

<?php

$results
= array();

array_walk_recursive($data, function ($item, $key) use (&$results){$results[$key] = $item;});

print_r($results);

?>
up
2
mike at mpsharp dot com
4 years ago
Here's a more general solution to modifying the array to which the leaf belongs. You can unset the current key, or add siblings, etc.

<?php
/**
* Modified version of array_walk_recursive that passes in the array to the callback
* The callback can modify the array or value by specifying a reference for the parameter.
*
* @param array The input array.
* @param callable $callback($value, $key, $array)
*/
function array_walk_recursive_array(array &$array, callable $callback) {
foreach (
$array as $k => &$v) {
if (
is_array($v)) {
array_walk_recursive_array($v, $callback);
} else {
$callback($v, $k, $array);
}
}
}
?>
up
2
lincoln dot du dot j at gmail dot com
6 years ago
multidimensional array to single array

$array=[1=>[2,5=>[4,2],[7,8=>[3,6]],5],4];
$arr=[];
array_walk_recursive($array, function($k){global $arr; $arr[]=$k;});
print_r($arr);

Output

Array ( [0] => 2 [1] => 4 [2] => 2 [3] => 7 [4] => 3 [5] => 6 [6] => 5 [7] => 4 )
up
6
gk at anuary dot com
10 years ago
array_walk_recursive itself cannot unset values. Even though you can pass array by reference, unsetting the value in the callback will only unset the variable in that scope.

<?php
/**
* http://uk1.php.net/array_walk_recursive implementation that is used to remove nodes from the array.
*
* @param array The input array.
* @param callable $callback Function must return boolean value indicating whether to remove the node.
* @return array
*/
function walk_recursive_remove (array $array, callable $callback) {
foreach (
$array as $k => $v) {
if (
is_array($v)) {
$array[$k] = walk_recursive_remove($v, $callback);
} else {
if (
$callback($v, $k)) {
unset(
$array[$k]);
}
}
}

return
$array;
}
?>

An up to date implementation of the above function can be looked up from https://github.com/gajus/marray/blob/master/src/marray.php#L116.
up
1
Anonymous
6 years ago
multidimensional array to single array

$array=[1=>[2,5=>[4,2],[7,8=>[3,6]],5],4];
$arr=[];
array_walk_recursive($array, function($k){global $arr; $arr[]=$k;});
print_r($arr);

Output

Array ( [0] => 2 [1] => 4 [2] => 2 [3] => 7 [4] => 3 [5] => 6 [6] => 5 [7] => 4 )
up
2
cyranix at cyranix dot com
12 years ago
I needed to add or modify values in an array with unknown structure. I was hoping to use array_walk_recursive for the task, but because I was also adding new nodes I came up with an alternate solution.

<?php

/**
* Sets key/value pairs at any depth on an array.
* @param $data an array of key/value pairs to be added/modified
* @param $array the array to operate on
*/
function setNodes($data, &$array)
{
$separator = '.'; // set this to any string that won't occur in your keys
foreach ($data as $name => $value) {
if (
strpos($name, $separator) === false) {
// If the array doesn't contain a special separator character, just set the key/value pair.
// If $value is an array, you will of course set nested key/value pairs just fine.
$array[$name] = $value;
} else {
// In this case we're trying to target a specific nested node without overwriting any other siblings/ancestors.
// The node or its ancestors may not exist yet.
$keys = explode($separator, $name);
// Set the root of the tree.
$opt_tree =& $array;
// Start traversing the tree using the specified keys.
while ($key = array_shift($keys)) {
// If there are more keys after the current one...
if ($keys) {
if (!isset(
$opt_tree[$key]) || !is_array($opt_tree[$key])) {
// Create this node if it doesn't already exist.
$opt_tree[$key] = array();
}
// Redefine the "root" of the tree to this node (assign by reference) then process the next key.
$opt_tree =& $opt_tree[$key];
} else {
// This is the last key to check, so assign the value.
$opt_tree[$key] = $value;
}
}
}
}
}

?>

Sample usage:

<?php

$x
= array();
setNodes(array('foo' => 'bar', 'baz' => array('quux' => 42, 'hup' => 101)), $x);
print_r($x); // $x has the same structure as the first argument
setNodes(array('jif.snee' => 'hello world', 'baz.quux.wek' => 5), $x);
print_r($x); // added $x['jif']['snee'] and modified $x['baz']['quux'] to be array('wek' => 5)

?>
up
2
robin leffmann
9 years ago
A simple solution for walking a nested array to obtain the last set value of a specified key:

<?php

$key
= 'blah';
$val = null;
array_walk_recursive( $your_array,
function(
$v, $k, $u) { if($k === $u[0]) $u[1] = $v; },
[
$key ,&$val] );

echo
"$key = $val";

?>
up
1
amoffat at amoffat dot com
15 years ago
<?
function my_array_map() {
$args = func_get_args();
$arr = array_shift($args);

foreach ($args as $fn) {
$nfn = create_function('&$v, $k, $fn', '$v = $fn($v);');
array_walk_recursive($arr, $nfn, $fn);
}
return $arr;
}
?>

takes an array as the first argument, and functions as the other arguments. it applies those functions recursively to the array
up
1
Rodrigo Guariento
10 years ago
Simple array_walk_recursive:

// var example
$myArray = Array(
Array('keyA1' => ' textA1 ', 'keyA2' => ' textA2 '),
Array('keyB1' => ' textB1 ', 'sub' =>
Array('keyB1_sub1' => ' textB1_sub1 '),
Array('keyB1_sub2' => ' textB1_sub2 ')
),
Array('keyC1' => ' textC1 ', 'keyC2' => ' textC2 '),
Array('keyD1' => ' textD1 ', 'keyD2' => ' textD2 '),
Array('keyE1' => ' textE1 ', 'keyE2' => ' textE2 ')
);

// function for "trim" (or your function, use same structure)
function trimming($data) {
if (gettype($data) == 'array')
return array_map("trimming", $data);
else
return trim($data);
}

// get array
$myArray = array_map("trimming", $myArray);

// show array trimmed
var_dump($myArray);

/*
RESULT

array (size=5)
0 =>
array (size=2)
'keyA1' => string 'textA1' (length=6)
'keyA2' => string 'textA2' (length=6)
1 =>
array (size=3)
'keyB1' => string 'textB1' (length=6)
'sub' =>
array (size=1)
'keyB1_sub1' => string 'textB1_sub1' (length=11)
0 =>
array (size=1)
'keyB1_sub2' => string 'textB1_sub2' (length=11)
2 =>
array (size=2)
'keyC1' => string 'textC1' (length=6)
'keyC2' => string 'textC2' (length=6)
3 =>
array (size=2)
'keyD1' => string 'textD1' (length=6)
'keyD2' => string 'textD2' (length=6)
4 =>
array (size=2)
'keyE1' => string 'textE1' (length=6)
'keyE2' => string 'textE2' (length=6)

*/
up
2
gabrielu at hotmail dot com
18 years ago
I decided to add to the previous PHP 4 compatible version of array_walk_recursive() so that it would work within a class and as a standalone function. Both instances are handled by the following function which I modified from omega13a at sbcglobal dot net.

The following example is for usage within a class. To use as a standalone function take it out of the class and rename it. (Example: array_walk_recursive_2)

<?php
class A_Class {

function
array_walk_recursive(&$input, $funcname, $userdata = '') {
if(!
function_exists('array_walk_recursive')) {
if(!
is_callable($funcname))
return
false;

if(!
is_array($input))
return
false;

foreach(
$input as $key=>$value) {
if(
is_array($input[$key])) {
if(isset(
$this)) {
eval(
'$this->' . __FUNCTION__ . '($input[$key], $funcname, $userdata);');
} else {
if(@
get_class($this))
eval(
get_class() . '::' . __FUNCTION__ . '($input[$key], $funcname, $userdata);');
else
eval(
__FUNCTION__ . '($input[$key], $funcname, $userdata);');
}
} else {
$saved_value = $value;

if(
is_array($funcname)) {
$f = '';
for(
$a=0; $a<count($funcname); $a++)
if(
is_object($funcname[$a])) {
$f .= get_class($funcname[$a]);
} else {
if(
$a > 0)
$f .= '::';
$f .= $funcname[$a];
}
$f .= '($value, $key' . (!empty($userdata) ? ', $userdata' : '') . ');';
eval(
$f);
} else {
if(!empty(
$userdata))
$funcname($value, $key, $userdata);
else
$funcname($value, $key);
}

if(
$value != $saved_value)
$input[$key] = $value;
}
}
return
true;
} else {
array_walk_recursive($input, $funcname, $userdata);
}
}

function
kv_addslashes(&$v, $k) {
$v = addslashes($v);
}
}
?>

Usage:
<?php
$arr
= array(
'a' => '"Hello World"',
'b' => "'Hello World'",
'c' => "Hello 'Worl\"d",
'd' => array(
'A' => 'H"e"l"l"o" "W"o"r"l"d'
)
);

$class = new A_Class();
$class->array_walk_recursive($arr, array(&$class, 'kv_addslashes'));
print_r($arr);
?>
up
1
Anonymous
10 years ago
since PHP 5.3.0, you will get a warning saying that "call-time pass-by-reference" is deprecated when you use & in foo(&$a);. And as of PHP 5.4.0, call-time pass-by-reference was removed, so using it will raise a fatal error.
up
0
lincoln dot du dot j at gmail dot com
3 years ago
Normal function solution

//1,2,2,3,6,7,3,1,4,2
$arr=[
[1,2],
[2,3],
6,7,[3,1,[4,2]]
];

function a($array){
static $res=[];
foreach($array as $val){
if(is_array($val)){
a($val);
}else{
$res[]=$val;
}
}
return $res;
}

print_r(a($arr));
up
0
chris at willowsconsulting dot ie
11 years ago
To convert all values of an array in UTF8, do this:

<?php

function convert_before_json(&$item, &$key)
{
$item=utf8_encode($item);
}

array_walk_recursive($your_array,"convert_before_json");

?>
up
-2
JW
16 years ago
This function has a serious bug, which is still not fixed as of the PHP 5.2.5 release. After you call it, it can accidentally modify your original array. Save yourself hours of frustration by reading on.

The bug is here: http://bugs.php.net/bug.php?id=42850, and it looks like it will be fixed for 5.3.

If the array that you walk contains other array elements, they will be turned into references. This will happen even if the callback function doesn't take its first argument by reference, and doesn't do anything to the values.

For example, try this:
<?php
$data
= array ('key1' => 'val1', 'key2' => array('key3' => 'val3'));
function
foo($item, $key){}
var_dump($data);
?>

The original array has no references. Now try this:
<?php
array_walk_recursive
($data,'foo');
var_dump($data);
?>

Now key2 is a reference, not just an array. So if you do this:
<?php
function test($item){$item['key2'] = array();}
test($data);
var_dump($data);
?>

you will see that test modifies $data, even though it shouldn't.

One workaround is to immediately make a deep copy of the array after calling array_walk_recursive, like this:
<?php
function array_duplicate($input) {
if (!
is_array($input)) return $input;
$output = array();
foreach (
$input as $key => $value) {
$output[$key] = array_duplicate($value);
}
return
$output;
}
array_walk_recursive($data,'foo');
$data = array_duplicate($data);
var_dump($data);
?>

After doing that, the references are gone.
up
-1
seductiveapps.com
6 years ago
usage :
$nd = $newsApp2->dataSources();
//walkArray ($nd, 'walkArray_printKey', 'walkArray_printValue');
// prints the entire array

$x = chaseToPath ($nd, 'RSS_list/English News',false);
walkArray ($x, 'walkArray_printKey', 'walkArray_printValue');
// prints everything under $nd['RSS_list']['English News']

function &chaseToPath (&$wm, $path, $create=false) {
//var_dump ($create); die();
//echo '$wm=<pre>'; var_dump ($wm);echo '</pre>'; //die();
//$path = str_replace ('/', '/d/', $path);
//$path .= '/d';
$nodes = explode ('/', $path);
$chase = &chase ($wm, $nodes, $create);

//echo '$wm=<pre>'; var_dump ($wm);echo '</pre>'; die();
/*
$dbg = array (
'$path' => $path,
'$nodes' => $nodes,
'$wm' => $wm,
'$chase' => $chase
);
echo '$dbg=<pre style="background:red;color:yellow;">'; var_dump ($dbg); echo '</pre>';
*/
//die();


$false = false;
if (good($chase)) {
$arr = &result($chase);
return $arr;
} else return $false;
}

function &chase (&$arr, $indexes, $create=false) {
if (false) {
echo 'sitewide/functions.php --- $arr=<pre>'; var_dump ($arr); echo '</pre>';
echo 'sitewide/functions.php --- $indexes=<pre>'; var_dump ($indexes); echo '</pre>';
echo 'sitewide/functions.php --- $create=<pre>'; var_dump ($create); echo '</pre>';
}
$r = &$arr;
foreach ($indexes as $idx) {
//echo 'sitewide/functions.php --- $idx=<pre>'; var_dump ($idx); var_dump (array_key_exists($idx,$r)); var_dump ($r); echo '</pre>';
if (
is_array($r)
&& (
$create===true
|| array_key_exists($idx,$r)
)
) {
if ($create===true && !array_key_exists($idx,$r)) $r[$idx]=array();
//echo 'sitewide/functions.php --- $idx=<pre>'; var_dump ($idx); echo '</pre>';
$r = &$r[$idx];
} else {
$err = array(
'msg' => 'Could not walk the full tree',
'vars' => array(
'$idx--error'=>$idx,
'$indexes'=>$indexes,
'$arr'=>$arr
)
);
badResult (E_USER_NOTICE, $err);
$ret = false; // BUG #2 squashed
return $ret;
}
}

//echo 'sitewide/functions.php --- $r=<pre>'; var_dump ($r); echo '</pre>';
return goodResult($r);
}
To Top