PHP 8.4.0 RC4 available for testing

next

(PHP 4, PHP 5, PHP 7, PHP 8)

nextRückt den internen Arrayzeiger vor

Beschreibung

next(array|object &$array): mixed

next() verhält sich ähnlich wie current(), mit einem Unterschied: Der interne Zeiger wird um ein Element vorgerückt, bevor der Wert des Elements zurückgegeben wird, d. h. es wird der Wert des nächsten Elements zurückgegeben und der interne Zeiger um eins erhöht.

Parameter-Liste

array

Das betreffende Array.

Rückgabewerte

Gibt den Wert des nächsten Elements des Arrays zurück, auf das der interne Zeiger des Arrays gerade zeigt. Sind keine Elemente mehr vorhanden, wird false zurückgegeben.

Warnung

Diese Funktion kann sowohl das boolsche false zurückliefern, als auch einen nicht-boolschen Wert, welcher zu false ausgewertet wird. Weitere Informationen entnehmen Sie bitte dem Abschnitt über die boolschen Typen. Benutzen Sie deshalb den === Operator, um den Rückgabewert dieser Funktion zu überprüfen.

Changelog

Version Beschreibung
8.1.0 Bei Objekten ist die Verwendung dieser Funktion veraltet. Stattdessen sollte entweder das Objekt vorher mit get_mangled_object_vars() in ein Array umgewandelt werden oder es sollten die Methoden einer Klasse verwendet werden, die Iterator implementiert, z. B. ArrayIterator.
7.4.0 Instanzen von SPL-Klassen werden nun wie leere Objekte behandelt, die keine Eigenschaften haben, anstatt die Iterator-Methode aufzurufen, die den gleichen Namen wie diese Funktion hat.

Beispiele

Beispiel #1 Beispiel für die Verwendung von next() und Freunden

<?php
$transport
= array('zu Fuß', 'Fahrrad', 'Auto', 'Flugzeug');
$mode = current($transport); // $mode = 'zu Fuß';
$mode = next($transport); // $mode = 'Fahrrad';
$mode = next($transport); // $mode = 'Auto';
$mode = prev($transport); // $mode = 'Fahrrad';
$mode = end($transport); // $mode = 'Flugzeug';
?>

Anmerkungen

Hinweis: Das Ende eines Arrays ist von einem boolschen false-Element nicht zu unterscheiden. Um ein Array, das möglicherweise false-Elemente enthält, ordnungsgemäß zu durchlaufen, kann foreach verwendet werden. Um next() dennoch zu verwenden und ordnungsgemäß zu prüfen, ob das Ende des Arrays erreicht wurde, sollte geprüft werden, ob key() null ist.

Siehe auch

  • current() - Liefert das aktuelle Element eines Arrays
  • end() - Positioniert den internen Zeiger eines Arrays auf dessen letztes Element
  • prev() - Setzt den internen Arrayzeiger um ein Element zurück
  • reset() - Setzt den internen Zeiger eines Arrays auf sein erstes Element
  • each() - Liefert das aktuelle Schlüssel-Wert-Paar eines Arrays und rückt den Arrayzeiger vor

add a note

User Contributed Notes 19 notes

up
19
JumpIfBelow
7 years ago
Now from PHP 7.2, the function "each" is deprecated, so the has_next I've posted is no longer a good idea. There is another to keep it simple and fast:

<?php
function has_next(array $_array)
{
return
next($_array) !== false ?: key($_array) !== null;
}
?>
up
8
gg2005 at gmail dot com
17 years ago
Don't confuse next with continue!

If you're a Perl developer starting with PHP, you might try to use "next" inside a loop to skip to the next iteration...

i.e.,

foreach ($things as $thing) {
if (something I don't like about $thing) {
next;
}
blah....
}

The php compiler will take next... but it's not going to work.

Do this instead:
foreach ($things as $thing) {
if (something I don't like about $thing) {
continue;
}
blah....
}
up
5
court shrock
20 years ago
This code returns neighbors of the specified key. The result will be empty if it doesn't have any neighbors. My approach was to use the order of keys to determine neighbors, which is differnet from just getting the next/previous element in an array. Feel free to point out stupidities :)

<?php

function array_neighbor($arr, $key)
{
krsort($arr);
$keys = array_keys($arr);
$keyIndexes = array_flip($keys);

$return = array();
if (isset(
$keys[$keyIndexes[$key]-1]))
$return[] = $keys[$keyIndexes[$key]-1];
if (isset(
$keys[$keyIndexes[$key]+1]))
$return[] = $keys[$keyIndexes[$key]+1];

return
$return;
}

?>
up
2
nigra
6 years ago
This function will return the previous,next neighbors of an array entry within an associative array. If the specified $key points to the last or first element of the array, the first or last keys of the array will be returned consecutively. This is an improved version of the same function posted earlier.

<?php
function array_neighbor($count, $key = null, $arRelated = array(), $cntRelated = 2)
{
if(
$count > 0 && isset($key))
{
$keyL = $count - 1;
$keyR = 1;
$arResult = array();
for(
$i = 1; $i <= $cntRelated; $i++)
{
if(
$key == 0)
{
if((
$i % 2) == 0)
{
$curKey = $count - $keyL;
$keyL--;
}
else
{
$curKey = $count - $keyR;
$keyR++;
}
}
else
{
if(
$arRelated[$i] >= $count - 1)
{
$curKey = 0;
}
else
{
$curKey = $arRelated[$i] + 1;
}
}
$arResult[$i] = $curKey;
}
return
$arResult;
}
}

$arr = range(0, 4);
$count = count($arr);

foreach(
$arr as $key => $v)
{
if(
$arRelated = array_neighbor($count, $key, $arRelated))
{
$arHeighbor[$key]['RELATED'] = $arRelated;
}
}

echo
'<pre>';print_r($arHeighbor); echo '</pre>';
?>
Array
(
[0] => Array
(
[RELATED] => Array
(
[1] => 4
[2] => 1
)

)

[1] => Array
(
[RELATED] => Array
(
[1] => 0
[2] => 2
)

)

[2] => Array
(
[RELATED] => Array
(
[1] => 1
[2] => 3
)

)

[3] => Array
(
[RELATED] => Array
(
[1] => 2
[2] => 4
)

)

[4] => Array
(
[RELATED] => Array
(
[1] => 3
[2] => 0
)

)

)
up
3
brentimus
19 years ago
Papipo's function below is usefull in concept but does not work.

"Since you do not pass the array by reference, its pointer is only moved inside the function."

This is true, but the array you are manipulating in your has_next() function will have it's pointer set to the first element, not the same position as the original array. What you want to do is pass the array to the has_next() function via reference. While in the has_next() function, make a copy of the array to work on. Find out the current pointer position of the original array and set the pointer on the working copy of the array to the same element. Then you may test to see if the array has a "next" element.

Try the followig insetad:

<?php
function has_next(&$array)
{
$A_work=$array; //$A_work is a copy of $array but with its internal pointer set to the first element.
$PTR=current($array);
array_set_pointer($A_work, $PTR);

if(
is_array($A_work))
{
if(
next($A_work)===false)
return
false;
else
return
true;
}
else
return
false;
}

function
array_set_pointer(&$array, $value)
{
reset($array);
while(
$val=current($array))
{
if(
$val==$value)
break;

next($array);
}
}
?>
up
1
double at dumpit dot de
14 years ago
PHP: 5.2.10-2ubuntu6.3 (default apt-get installation on actual, see Date, jaunty 9.10 Ubuntu Distro - G33kWoRDs)

Have a look at your array pointer if you copy an array - the pointer will be copied, too.

For example if you got this construct:
<?php
$array
= array('zero','one','two','three','four','five','six','seven');
$array2 = $array;
next($array);
echo
key($array);
echo
key($array2);

// will output:
// 1
// 0
?>

But if you copy the array after you've setted the pointer, the pointer will be copied, too:
<?php
$array
= array('zero','one','two','three','four','five','six','seven');
next($array);
$array2 = $array;
echo
key($array);
echo
key($array2);

// will output:
// 1
// 1
?>

What's more is, that foreach not resetting the pointer after walk through:
<?php

$array
= array('zero','one','two','three','four','five','six','seven');
next($array);
$array2 = array();
foreach(
$array AS $key => $value){
echo
$key;
$array2[$key] = $value;
}
echo
var_dump(key($array));
echo
key($array2);

// will output for foreach:
// 0 1 2 3 4 5 6 7
// and for the keys
// NULL
// 0
?>

The php-functions seems to reset the pointer on the given position after walk through (i don't know the internal handling - there could be used a copy of the array, too):
<?php

$array
= array('zero','one','two','three','four','five','six','seven');
next($array);
$array2 = array_values($array);
echo
key($array);
echo
key($array2);

// will output:
// 1
// 0
?>

There are a lot Methods like array_merge($array) that will neither reset the pointer of $array nor copy the pointer to $array2. Have a look on this.
I Hope this was a little helpfull.
up
1
bm at ANTISPAM dot solidwave dot com
20 years ago
Take care when replacing code using reset()/next() with code using foreach as foreach does not update the array's internal pointer. This means you cannot, say, use next() to skip an element in foreach loop, or use current() within a function to get a reference to the current element. You probably have code depending on this internal pointer and replacing it will be more work than you anticipated.

See http://www.php.net/foreach
up
0
jbeauwalker at gmail dot com
2 months ago
I suggest that a WARNING that next() should not be used within a foreach loop should be included in the main body of the documentation at the top. At one time, it seems to have been there, but I spent hours trying to solve the bizarre problems that result from this combination, only to stumble on a clue to it on another site, that seem to suggest that it was originally clearly identified. If you look hard, this problem is referenced in some notes, but one doesn't expect to look there for something so basic.
up
1
papipo's gmail account
20 years ago
I need to know if an array has more items, but without moving array's internail pointer. Thats is, a has_next() function:

<?php
function has_next($array) {
if (
is_array($array)) {
if (
next($array) === false) {
return
false;
} else {
return
true;
}
} else {
return
false;
}
}

$array = array('fruit', 'melon');
if (
has_next($array)) {
echo
next($array);
}

// prints 'melon'
?>

Since you do not pass the array by reference, its pointer is only moved inside the function.
Hope that helps.
up
0
notImportant
6 years ago
a more readable version of papipo's has_next function:

<?php
function has_next($array) {
$has_next = is_array($array) && next($array) !== false;

return
$has_next;
}
?>

OR

<?php
function has_next($array) {
$has_next = false;
if(
is_array($array)) {
$has_next = next($array) !== false;
}

return
$has_next;
}
?>
up
-1
tecdoc at ukr dot net
1 year ago
It is good example how to loop array by current() and next() functions from php key() manual. In my opinion, this particular example would be better placed in current() and next() than key() manuals.

<?php
$array
= array(
'fruit1' => 'apple',
'fruit2' => 'orange',
'fruit3' => 'grape',
'fruit4' => 'apple',
'fruit5' => 'apple');

// this cycle echoes all associative array
// key where value equals "apple"
reset($array); // prepare array for cycle
while ($fruit_name = current($array)) {
if (
$fruit_name == 'apple') {
echo
key($array), "\n";
}
next($array);
}
?>
up
-1
tecdoc at ukr dot net
1 year ago
Be attentive! It is possibility to lose the array pointer with next() and prev();
<?php
// example
$array = array(
'fruit1' => 'apple',
'fruit2' => 'orange',
'fruit3' => 'grape',
'fruit4' => 'apple',
'fruit5' => 'apple');

reset($array); // prepare array

$row = current($array);
var_dump($row); // 'apple'

$row = prev($array);
var_dump($row); // false. The array pointer is lossed!

$row = next($array); // it is not possible to return to the previous (first/last element)!
var_dump($row); // false
?>
up
-2
Anonymous
2 years ago
This is the best example of using next in a loop

<?php
$array
= array(
'fruit1' => 'apple',
'fruit2' => 'orange',
'fruit3' => 'grape',
'fruit4' => 'apple',
'fruit5' => 'apple');

// this cycle echoes all associative array
// key where value equals "apple"
reset($array); // prepare array for cycle
while ($fruit_name = current($array)) {
if (
$fruit_name == 'apple') {
echo
key($array), "\n";
}
next($array);
}
reset($array);
?>
up
-1
lukasz at karapuda dot com
20 years ago
This function will return the previous,next neighbors of an array entry within an associative array. If the specified $key points to the last or first element of the array, the first or last keys of the array will be returned consecutively. This is an improved version of the same function posted earlier.

<?php
function array_neighbor($arr, $key)
{
$keys = array_keys($arr);
$keyIndexes = array_flip($keys);

$return = array();
if (isset(
$keys[$keyIndexes[$key]-1])) {
$return[] = $keys[$keyIndexes[$key]-1];
}
else {
$return[] = $keys[sizeof($keys)-1];
}

if (isset(
$keys[$keyIndexes[$key]+1])) {
$return[] = $keys[$keyIndexes[$key]+1];
}
else {
$return[] = $keys[0];
}

return
$return;
}
?>
up
-1
Mikhail
5 years ago
This function returns next element in array after your key or false if it last or key doesn't exists in array.

<?php

function nextElement(array $array, $currentKey)
{
if (!isset(
$array[$currentKey])) {
return
false;
}
$nextElement = false;
foreach (
$array as $key => $item) {
$nextElement = next($array);
if (
$key == $currentKey) {
break;
}
}

return
$nextElement;
}
up
-2
darkside at i dot ua
16 years ago
This class implements simple operations with array

<?php
class Steps {

private
$all;
private
$count;
private
$curr;

public function
__construct () {

$this->count = 0;

}

public function
add ($step) {

$this->count++;
$this->all[$this->count] = $step;

}

public function
setCurrent ($step) {

reset($this->all);
for (
$i=1; $i<=$this->count; $i++) {
if (
$this->all[$i]==$step) break;
next($this->all);
}
$this->curr = current($this->all);

}

public function
getCurrent () {

return
$this->curr;

}

public function
getNext () {

self::setCurrent($this->curr);
return
next($this->all);

}

}
?>

usage example:

<?php
$steps
= new Steps();
$steps->add('one');
$steps->add('two');
$steps->add('three');
$steps->setCurrent('one');
echo
$steps->getCurrent()."<br />";
echo
$steps->getNext()."<br />";
$steps->setCurrent('two');
echo
$steps->getCurrent()."<br />";
echo
$steps->getNext()."<br />";
?>
up
-2
ThinkMedical at Gmail dot com
16 years ago
regarding references with foreach, you can use them directly. Obviating various posts which provide many lines of 'work arounds'.

$array = array(1,2,3,4,5);

foreach($array as &$value)

or use $key

foreach($array as $key => $value)
{
$array[$key] = '...';
}
up
-1
andy at andysdrawings dot co dot uk
6 years ago
brentimus' array_set_pointer function will only work if the array value is unique in the array, and none of the array values are FALSE. It would be more reliable to use key() instead of current(). For similar reasons it's better to check key() after calling next() to determine whether the next() element "exists". Simply checking the value returned by next() will produce a false negative when looking at, for example, the first element of the array: ['one', 0, 'three']

However, it also turns out that the copied array retains the original array's pointer, so array_set_pointer is not actually required here. The following should work:

<?php
function has_next(array &$array) {
$A_work = $array; // $A_work is a copy of $array including its internal pointer.
next($A_work);
if (
key($A_work) === NULL)
return
false;
else
return
true;
}
?>
up
-4
JumpIfBelow
9 years ago
After dealing with the fact that next() will either returns FALSE when there is no further element in the array or if the element itself is FALSE, I finally find a way to do a has_next() method, which will never fails. You can ignore and/or downvote my last comment, this it will be deleted.
Here is the code that work :
<?php
function has_next(array $a){
return
next($a) !== false ?: each($a) !== false;
}
?>
To Top