PHP 8.3.4 Released!

mysqli::multi_query

mysqli_multi_query

(PHP 5, PHP 7, PHP 8)

mysqli::multi_query -- mysqli_multi_queryFührt eine oder mehrere Abfragen in einer Datenbank durch

Beschreibung

Objektorientierter Stil

public mysqli::multi_query(string $query): bool

Prozeduraler Stil

mysqli_multi_query(mysqli $mysql, string $query): bool

Führt eine oder mehrere Abfragen aus, die durch Semikolons getrennt sind.

Warnung

Sicherheitswarnung: SQL-Injection

Wenn die Abfrage irgendwelche Eingabevariablen enthält, sollten stattdessen parametrisierte Prepared Statements verwendet werden. Alternativ dazu müssen die Daten korrekt formatiert sein und alle Strings müssen mit der Funktion mysqli_real_escape_string() maskiert werden.

Die Abfragen werden dabei asynchron in einem einzigen Aufruf an die Datenbank gesendet, aber die Datenbank verarbeitet sie sequentiell. mysqli_multi_query() wartet, bis die erste Abfrage abgeschlossen ist, bevor es die Kontrolle an PHP zurückgibt. Der MySQL-Server verarbeitet dann der Reihe nach die nächsten Abfragen. Sobald das nächste Ergebnis vorliegt, wartet MySQL darauf, dass die Funktion mysqli_next_result() von PHP erneut ausgeführt wird.

Es wird empfohlen, eine do-while-Schleife zu verwenden, um mehrere Abfragen zu verarbeiten. Die Verbindung ist so lange belegt, bis alle Abfragen abgeschlossen sind und ihre Ergebnisse an PHP übermittelt wurden. Solange nicht alle Abfragen abgearbeitet sind, kann keine andere Anweisung auf derselben Verbindung ausgeführt werden. Um mit der nächsten Abfrage in der Reihenfolge fortzufahren, muss mysqli_next_result() verwendet werden. Wenn das nächste Ergebnis noch nicht bereit ist, wartet mysqli auf die Antwort des MySQL-Servers. Um zu prüfen, ob es weitere Ergebnisse gibt, kann mysqli_more_results() verwendet werden.

Bei Abfragen, die eine Ergebnismenge zurückgeben, also zum Beispiel SELECT, SHOW, DESCRIBE oder EXPLAIN, können die Funktionen mysqli_use_result() oder mysqli_store_result() verwendet werden, um die Ergebnismenge abzurufen. Bei Abfragen, die keine Ergebnismenge zurückgeben, können die gleichen Funktionen verwendet werden, um Informationen wie die Anzahl der betroffenen Zeilen abzurufen.

Tipp

Wenn CALL-Anweisungen für gespeicherte Prozeduren ausgeführt werden, können mehrere Ergebnismengen erzeugt werden. Wenn die gespeicherte Prozedur SELECT-Anweisungen enthält, werden die Ergebnismengen in der Reihenfolge zurückgegeben, in der sie bei der Ausführung der Prozedur erzeugt werden. Im Allgemeinen kann der Aufrufende nicht wissen, wie viele Ergebnismengen eine Prozedur zurückgeben wird, und muss damit rechnen, mehrere Ergebnisse abrufen zu müssen. Das letzte Ergebnis der Prozedur ist ein Statusergebnis, das keine Ergebnismenge enthält. Der Status gibt an, ob die Prozedur erfolgreich war oder ein Fehler aufgetreten ist.

Parameter-Liste

mysql

Nur bei prozeduralem Aufruf: ein von mysqli_connect() oder mysqli_init() zurückgegebenes mysqli-Objekt.

query

Eine Zeichenkette mit den Abfragen, die ausgeführt werden sollen. Mehrere Abfragen müssen durch ein Semikolon getrennt werden.

Rückgabewerte

Wenn die erste Anweisung fehlgeschlagen ist, wird false zurückgegeben. Um nachfolgende Fehler von anderen Anweisungen zu erhalten, muss zuerst die Funktion mysqli_next_result() aufgerufen werden.

Fehler/Exceptions

If mysqli error reporting is enabled (MYSQLI_REPORT_ERROR) and the requested operation fails, a warning is generated. If, in addition, the mode is set to MYSQLI_REPORT_STRICT, a mysqli_sql_exception is thrown instead.

Beispiele

Beispiel #1 mysqli::multi_query()-Beispiel

Objektorientierter Stil

<?php

mysqli_report
(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);
$mysqli = new mysqli("localhost", "my_user", "my_password", "world");

$query = "SELECT CURRENT_USER();";
$query .= "SELECT Name FROM City ORDER BY ID LIMIT 20, 5";

/* Mehrfachabfrage ausführen */
$mysqli->multi_query($query);
do {
/* Ergebnismenge in PHP speichern */
if ($result = $mysqli->store_result()) {
while (
$row = $result->fetch_row()) {
printf("%s\n", $row[0]);
}
}
/* Trennlinie ausgeben */
if ($mysqli->more_results()) {
printf("-----------------\n");
}
} while (
$mysqli->next_result());

Prozeduraler Stil

<?php

mysqli_report
(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);
$link = mysqli_connect("localhost", "my_user", "my_password", "world");

$query = "SELECT CURRENT_USER();";
$query .= "SELECT Name FROM City ORDER BY ID LIMIT 20, 5";

/* Mehrfachabfrage ausführen */
mysqli_multi_query($link, $query);
do {
/* Ergebnismenge in PHP speichern */
if ($result = mysqli_store_result($link)) {
while (
$row = mysqli_fetch_row($result)) {
printf("%s\n", $row[0]);
}
}
/* Trennlinie ausgeben */
if (mysqli_more_results($link)) {
printf("-----------------\n");
}
} while (
mysqli_next_result($link));

Oben gezeigte Beispiele erzeugen eine ähnliche Ausgabe wie:

my_user@localhost
-----------------
Amersfoort
Maastricht
Dordrecht
Leiden
Haarlemmermeer

Siehe auch

add a note

User Contributed Notes 23 notes

up
155
jcn50
13 years ago
WATCH OUT: if you mix $mysqli->multi_query and $mysqli->query, the latter(s) won't be executed!

<?php
// BAD CODE:
$mysqli->multi_query(" Many SQL queries ; "); // OK
$mysqli->query(" SQL statement #1 ; ") // not executed!
$mysqli->query(" SQL statement #2 ; ") // not executed!
$mysqli->query(" SQL statement #3 ; ") // not executed!
$mysqli->query(" SQL statement #4 ; ") // not executed!
?>

The only way to do this correctly is:

<?php
// WORKING CODE:
$mysqli->multi_query(" Many SQL queries ; "); // OK
while ($mysqli->next_result()) {;} // flush multi_queries
$mysqli->query(" SQL statement #1 ; ") // now executed!
$mysqli->query(" SQL statement #2 ; ") // now executed!
$mysqli->query(" SQL statement #3 ; ") // now executed!
$mysqli->query(" SQL statement #4 ; ") // now executed!
?>
up
20
Ivan Gabriele
10 years ago
To be able to execute a $mysqli->query() after a $mysqli->multi_query() for MySQL > 5.3, I updated the code of jcn50 by this one :

<?php
// WORKING CODE:
$mysqli->multi_query(" Many SQL queries ; "); // OK

while ($mysqli->next_result()) // flush multi_queries
{
if (!
$mysqli->more_results()) break;
}

$mysqli->query(" SQL statement #1 ; ") // now executed!
$mysqli->query(" SQL statement #2 ; ") // now executed!
$mysqli->query(" SQL statement #3 ; ") // now executed!
$mysqli->query(" SQL statement #4 ; ") // now executed!
?>
up
8
miqrogroove at gmail dot com
11 years ago
Here are more details about error checking and return values from multi_query(). Testing shows that there are some mysqli properties to check for each result:

affected_rows
errno
error
insert_id
warning_count

If error or errno are not empty then the remaining queries did not return anything, even though error and errno will appear to be empty if processing further results is continued.

Also note that get_warnings() will not work with multi_query(). It can only be used after looping through all results, and it will only get the warnings for the last one of the queries and not for any others. If you need to see or log query warning strings then you must not use multi_query(), because you can only see the warning_count value.
up
4
info at ff dot net
17 years ago
Note that you need to use this function to call Stored Procedures!

If you experience "lost connection to MySQL server" errors with your Stored Procedure calls then you did not fetch the 'OK' (or 'ERR') message, which is a second result-set from a Stored Procedure call. You have to fetch that result to have no problems with subsequent queries.

Bad example, will FAIL now and then on subsequent calls:
<?php
$sQuery
='CALL exampleSP('param')';
if(!
mysqli_multi_query($this->sqlLink,$sQuery))
$this->queryError();
$this->sqlResult=mysqli_store_result($this->sqlLink);
?>

Working example:
<?php
$sQuery
='CALL exampleSP('param')';
if(!
mysqli_multi_query($this->sqlLink,$sQuery))
$this->queryError();
$this->sqlResult=mysqli_store_result($this->sqlLink);

if(
mysqli_more_results($this->sqlLink))
while(
mysqli_next_result($this->sqlLink));
?>

Of course you can do more with the multiple results then just throwing them away, but for most this will suffice. You could for example make an "sp" function which will kill the 2nd 'ok' result.

This nasty 'OK'-message made me spend hours trying to figure out why MySQL server was logging warnings with 'bad packets from client' and PHP mysql_error() with 'Connection lost'. It's a shame the mysqli library does catch this by just doing it for you.
up
11
mjmendoza at grupzero dot tk
17 years ago
I was developing my own CMS and I was having problem with attaching the database' sql file. I thought mysqli_multi_query got bugs where it crashes my MySQL server. I tried to report the bug but it showed that it has duplicate bug reports of other developers. To my surprise, mysqli_multi_query needs to bother with result even if there's none.

I finally got it working when I copied the sample and removed somethings. Here is what it looked liked

<?php
$link
= mysqli_connect("localhost", "my_user", "my_password", "world");

/* check connection */
if (mysqli_connect_errno()) {
printf("Connect failed: %s\n", mysqli_connect_error());
exit();
}

$query = "CREATE TABLE....;...;... blah blah blah;...";

/* execute multi query */
if (mysqli_multi_query($link, $query)) {
do {
/* store first result set */
if ($result = mysqli_store_result($link)) {
//do nothing since there's nothing to handle
mysqli_free_result($result);
}
/* print divider */
if (mysqli_more_results($link)) {
//I just kept this since it seems useful
//try removing and see for yourself
}
} while (
mysqli_next_result($link));
}

/* close connection */
mysqli_close($link);
?>

bottom-line: I think mysql_multi_query should only be used for attaching a database. it's hard to handle results from 'SELECT' statements inside a single while loop.
up
2
vicky dot gonsalves at outlook dot com
10 years ago
Following code can be used to resolve
mysqli::next_result(): There is no next result set. Please, call mysqli_more_results()/mysqli::more_results() to check whether to call this function/method

$query = "SELECT SOME_COLUMN FROM SOME_TABLE_NAME;";
$query .= "SELECT SOME_OTHER_COLUMN FROM SOME_TABLE_NAME";
/* execute multi query */
if (mysqli_multi_query($this->conn, $query)) {
$i = true;
do {
/* store first result set */
if ($result = mysqli_store_result($this->conn)) {
while ($row = mysqli_fetch_row($result)) {
printf("%s\n", $row[0]);
}
mysqli_free_result($result);
}
/* print divider */
if (mysqli_more_results($this->conn)) {
$i = true;
printf("-----------------\n");
} else {
$i = false;
}
} while ($i && mysqli_next_result($this->conn));
}
up
1
Miles
14 years ago
You can use prepared statements on stored procedures.

You just need to flush all the subsequent result sets before closing the statement... so:

$mysqli_stmt = $mysqli->prepare(....);

... bind, execute, bind, fetch ...

while($mysqli->more_results())
{
$mysqli->next_result();
$discard = $mysqli->store_result();
}

$mysqli_stmt->close();

Hope that helps :o)
up
4
Lubaev K
10 years ago
Use generator.
PHP 5.5.0
<?php
// Quick multiQuery func.
function multiQuery( mysqli $mysqli, $query ) {
if (
$mysqli->multi_query( $query )) {
do {
if (
$result = $mysqli->store_result()) {
while (
$row = $result->fetch_row()) {
foreach (
$row as $key => $value) yield $key => $value;
}
$result->free();
}
} while(
$mysqli->more_results() && $mysqli->next_result() );
}
}

$query = "OPTIMIZE TABLE `question`;" .
"LOCK TABLES `question` READ;" .
"SELECT * FROM `question` WHERE `questionid`=2;" .
"SELECT * FROM `question` WHERE `questionid`=7;" .
"SELECT * FROM `question` WHERE `questionid`=8;" .
"SELECT * FROM `question` WHERE `questionid`=9;" .
"SELECT * FROM `question` WHERE `questionid`=11;" .
"SELECT * FROM `question` WHERE `questionid`=12;" .
"UNLOCK TABLES;" .
"TRUNCATE TABLE `question`;";

$mysqli = new mysqli('localhost', 'user', 'pswd', 'dbnm');
$mysqli->set_charset("cp1251");

// result
foreach ( multiQuery($mysqli, $query) as $key => $value ) {
echo
$key, $value, PHP_EOL;
}

?>
Good luck!
up
4
skunkbad
10 years ago
I appreciate the advice from crmccar at gmail dot com regarding the proper way to check for errors, but I would get an error with his/her code. I fixed it by changing the code a little:

<?php
$sql
= file_get_contents( 'sql/test_' . $id . '_data.sql');

$query_array = explode(';', $sql);

// Run the SQL
$i = 0;
if(
$this->mysqli->multi_query( $sql ) )
{
do {
$this->mysqli->next_result();

$i++;
}
while(
$this->mysqli->more_results() );
}

if(
$this->mysqli->errno )
{
die(
'<h1>ERROR</h1>
Query #'
. ( $i + 1 ) . ' of <b>test_' . $id . '_data.sql</b>:<br /><br />
<pre>'
. $query_array[ $i ] . '</pre><br /><br />
<span style="color:red;">'
. $this->mysqli->error . '</span>'
);
}
?>
up
6
crmccar at gmail dot com
12 years ago
I'd like to reinforce the correct way of catching errors from the queries executed by multi_query(), since the manual's examples don't show it and it's easy to lose UPDATEs, INSERTs, etc. without knowing it.

$mysqli->next_result() will return false if it runs out of statements OR if the next statement has an error. Therefore, it's important to check for errors when the loop ends. Also, I believe it's useful to know when and where the loop broke, so consider the following code:

<?php
$statements
= array("INSERT INTO tablename VALUES ('1', 'one')", "INSERT INTO tablename VALUES ('2', 'two')");
if (
$mysqli->multi_query(implode(';', $statements))) {
$i = 0;
do {
$i++;
} while (
$mysqli->next_result());
}
if (
$mysqli->errno) {
echo
"Batch execution prematurely ended on statement $i.\n";
var_dump($statements[$i], $mysqli->error);
}
?>

The IF statement on the multi_query() call checks the first result, because next_result() starts at the second.
up
2
keksov at gmail dot com
10 years ago
If you want to create a table with triggers, procedures or functions in one multiline query you may stuck with a error -
#1064 - You have an error in your SQL syntax; xxx corresponds to your MySQL server version for the right syntax to use near 'DELIMITER' at line 1

The solution is very simple - don't use DELIMITER keyword at all! So, instead of :

DELIMITER |
CREATE TRIGGER $dbName.$iname BEFORE INSERT ON $table FOR EACH ROW
BEGIN
<body>
EOT|
DELIMITER ;

just use :

CREATE TRIGGER $dbName.$iname BEFORE INSERT ON $table FOR EACH ROW
BEGIN
<body>
EOT;

For more information read answers at StackOverflow for question #5311141

http://stackoverflow.com/questions/5311141/how-to-execute-mysql-command-delimiter
up
1
Anonymous
12 years ago
If your second or late query returns no result or even if your query is not a valid SQL query, more_results(); returns true in any case.
up
1
Shawn Pyle
13 years ago
Be sure to not send a set of queries that are larger than max_allowed_packet size on your MySQL server. If you do, you'll get an error like:
Mysql Error (1153): Got a packet bigger than 'max_allowed_packet' bytes

To see your MySQL size limitation, run the following query: show variables like 'max_allowed_packet';

or see http://dev.mysql.com/doc/refman/5.1/en/packet-too-large.html
up
2
jlong at carouselchecks dot com
11 years ago
Getting "Error: Commands out of sync; you can't run this command now" after running a multi-query? Make sure you've cleared out the queue of results.

Here's what I've used to discard all subsequent results from a multi-query:

<?php
while($dbLink->more_results() && $dbLink->next_result()) {
$extraResult = $dbLink->use_result();
if(
$extraResult instanceof mysqli_result){
$extraResult->free();
}
}

?>
up
0
brice dot php at radium dot fr
8 days ago
// To drop the results of a multi_query, here is a solution that works:

$query = "myquery 1; myquery 2; myquery 3";

if($mysqli->multi_query($query)) {
do {
if ($result=$mysqli->store_result()) $result->free();
} while ($mysqli->more_results() && $mysqli->next_result());
}

// and what is below will work

$mysqli->query("myquery");

// that's all
up
-1
ashteroid
3 years ago
To get the affected/selected row count from all queries

$q = "UPDATE `Review` SET `order` = 1 WHERE id = 600;" // aff 1
. "UPDATE `Review` SET `order` = 600 WHERE id = 1;" //aff 1
. "SELECT 0;" //for testing, aff rows == -1
;

$affcnt = 0;
$rowcnt = 0;

$res = $db->multi_query($q);
if($res == false)
Lib::throw( $q . "\n[" . $db->errno . "]\n" . $db->error . "\n" );
do
{
$affcnt += $db->affected_rows;
if( isset($res->num_rows) )
$rowcnt += $res->num_rows;
}
while( $db->more_results() && $res = $db->next_result() );
//IMPORTANT: call more_results First!, THEN next_result to get new data.

return $res;
up
0
Stjepan Brbot
7 years ago
This example shows how to read data from multiple stored procedures. Here I have two stored procedures proc1() and proc2() and retrieve their data into 2D array:

<?php

$db
=new mysqli(...);

$sql="CALL proc1(...); CALL proc2(...);";

$procs=[]; //outer array for resultsets (tables)
$cols=[]; //inner array for columns (fields)

if($db->multi_query($sql))
{
do
{
$db->next_result();
if(
$rst=$db->use_result())
{
while(
$row=$rst->fetch_row())
{
$cols[]=$row[0]; //fetch 1st column value
$cols[]=$row[1]; //fetch 2nd column value
}
$procs[]=$cols; //add cols to procedures array
}
}
while(
$this->db->more_results());
}

?>
up
0
luka8088 at owave dot net
13 years ago
if you don't iterate through all results you get "server has gone away" error message ...

to resolve this, in php 5.2 it is enough to use

<?php
// ok for php 5.2
while ($mysqli->next_result());
?>

to drop unwanted results, but in php 5.3 using only this throws

mysqli::next_result(): There is no next result set. Please, call mysqli_more_results()/mysqli::more_results() to check whether to call this function/method

so it should be replaced with

<?php
// ok for php 5.3
while ($mysqli->more_results() && $mysqli->next_result());
?>

I also tried but failed:

<?php

// can create infinite look in some cases
while ($mysqli->more_results())
$mysqli->next_result();

// also throws error in some cases
if ($mysqli->more_results())
while (
$mysqli->next_result());

?>
up
1
jparedes at gmail dot com
15 years ago
It's very important that after executing mysqli_multi_query you have first process the resultsets before sending any another statement to the server, otherwise your
socket is still blocked.

Please note that even if your multi statement doesn't contain SELECT queries, the server will send result packages containing errorcodes (or OK packet) for single statements.
up
-1
undefined(AT)users(DOT)berlios(DOT)de
16 years ago
mysqli_multi_query handles MySQL Transaction on InnoDB's :-)

<?php

$mysqli
= mysqli_connect( "localhost", "owner", "pass", "db", 3306, "/var/lib/mysql/mysql.sock" );

$QUERY = <<<EOT
START TRANSACTION;
SELECT @lng:=IF( STRCMP(`main_lang`,'de'), 'en', 'de' )
FROM `main_data` WHERE ( `main_activ` LIKE 1 ) ORDER BY `main_id` ASC;
SELECT `main_id`, `main_type`, `main_title`, `main_body`, `main_modified`, `main_posted`
FROM `main_data`
WHERE ( `main_type` RLIKE "news|about" AND `main_lang` LIKE @lng AND `main_activ` LIKE 1 )
ORDER BY `main_type` ASC;
COMMIT;
EOT;

$query = mysqli_multi_query( $mysqli, $QUERY ) or die( mysqli_error( $mysqli ) );

if(
$query )
{
do {
if(
$result = mysqli_store_result( $mysqli ) )
{
$subresult = mysqli_fetch_assoc( $result );
if( ! isset(
$subresult['main_id'] ) )
continue;

foreach(
$subresult AS $k => $v )
{
var_dump( $k , $v );
}
}
} while (
mysqli_next_result( $mysqli ) );
}

mysqli_close( $mysqli );

?>
up
-1
ASchmidt at Anamera dot net
5 years ago
Multi-queries open the potential for a SQL injection.

The often cited "fallback" loop:

<?php
while ( $db->more_results() and $db->next_result() ) {
$rs = $db->use_result();
if(
$rs instanceof \mysqli_result ) {
$rs->free();
}
?>

certainly will avoid the dreaded error 2014 "Commands out of sync; you can't run this command now" error. However, that technique will completely disregard the fact that any excess result sets are a likely indication of an infiltrated system.

Instead, it may be wise to tightly manage the correct number of expected, individual result sets and throw an exception of more are received.

However, it's important to understand that any closing comment (which might have been appended as one defense against command appending) will result in an EXTRA, EMPTY result set.

Example:

SELECT SQL_CALC_FOUND_ROWS * FROM `table` LIMIT 10; SELECT FOUND_ROWS(); --

will produce THREE result sets:

#1 - the ten data rows,
#2 - the overall row count,
#3 - an empty result set, where: FALSE === $db->use_result(), even though it had been TRUE === ($db->more_results() and $db->next_result() ) .
up
-5
levani0101 at yahoo dot com
9 years ago
Please note that there is no need for the semicolon after the last query. That wasted more than hour of my time...
up
-4
jesper at hermandsen dot dk
9 years ago
If you're importing a sql-file with triggers, functions, stored procedures and other stuff, you'll might be using DELIMITER in MySQL.
Notice: This function assumes that all delimiters are on it's own line, and that "DELIMITER" are in all caps.

<?php
function mysqli_multi_query_file($mysqli, $filename) {
$sql = file_get_contents($filename);
// remove comments
$sql = preg_replace('#/\*.*?\*/#s', '', $sql);
$sql = preg_replace('/^-- .*[\r\n]*/m', '', $sql);
if (
preg_match_all('/^DELIMITER\s+(\S+)$/m', $sql, $matches, PREG_SET_ORDER | PREG_OFFSET_CAPTURE)) {
$prev = null;
$index = 0;
foreach (
$matches as $match) {
$sqlPart = substr($sql, $index, $match[0][1] - $index);
// move cursor after the delimiter
$index = $match[0][1] + strlen($match[0][0]);
if (
$prev && $prev[1][0] != ';') {
$sqlPart = explode($prev[1][0], $sqlPart);
foreach (
$sqlPart as $part) {
if (
trim($part)) { // no empty queries
$mysqli->query($part);
}
}
} else {
if (
trim($sqlPart)) { // no empty queries
$mysqli->multi_query($sqlPart);
while (
$mysqli->next_result()) {;}
}
}
$prev = $match;
}
// run the sql after the last delimiter
$sqlPart = substr($sql, $index, strlen($sql)-$index);
if (
$prev && $prev[1][0] != ';') {
$sqlPart = explode($prev[1][0], $sqlPart);
foreach (
$sqlPart as $part) {
if (
trim($part)) {
$mysqli->query($part);
}
}
} else {
if (
trim($sqlPart)) {
$mysqli->multi_query($sqlPart);
while (
$mysqli->next_result()) {;}
}
}
} else {
$mysqli->multi_query($sql);
while (
$mysqli->next_result()) {;}
}
}
?>
To Top