PHP 8.3.4 Released!

ldap_set_option

(PHP 4 >= 4.0.4, PHP 5, PHP 7, PHP 8)

ldap_set_option指定したオプションの値を設定する

説明

ldap_set_option(?LDAP\Connection $ldap, int $option, array|string|int|bool $value): bool

指定したオプションの値を value に設定します。

パラメータ

ldap

特定の接続に対してオプションを設定する場合は、 ldap_connect() が返す、 LDAP\Connection クラスのインスタンス。 オプションをグローバルに設定する場合は、 null を設定します。

option

パラメータ option は以下のいずれかとなります。

オプション ~以降で使用可能
LDAP_OPT_DEREF int  
LDAP_OPT_SIZELIMIT int  
LDAP_OPT_TIMELIMIT int  
LDAP_OPT_NETWORK_TIMEOUT int  
LDAP_OPT_PROTOCOL_VERSION int  
LDAP_OPT_ERROR_NUMBER int  
LDAP_OPT_REFERRALS bool  
LDAP_OPT_RESTART bool  
LDAP_OPT_HOST_NAME string  
LDAP_OPT_ERROR_STRING string  
LDAP_OPT_DIAGNOSTIC_MESSAGE string  
LDAP_OPT_MATCHED_DN string  
LDAP_OPT_SERVER_CONTROLS array  
LDAP_OPT_CLIENT_CONTROLS array  
LDAP_OPT_X_KEEPALIVE_IDLE int PHP 7.1.0
LDAP_OPT_X_KEEPALIVE_PROBES int PHP 7.1.0
LDAP_OPT_X_KEEPALIVE_INTERVAL int PHP 7.1.0
LDAP_OPT_X_TLS_CACERTDIR string PHP 7.1.0
LDAP_OPT_X_TLS_CACERTFILE string PHP 7.1.0
LDAP_OPT_X_TLS_CERTFILE string PHP 7.1.0
LDAP_OPT_X_TLS_CIPHER_SUITE string PHP 7.1.0
LDAP_OPT_X_TLS_CRLCHECK int PHP 7.1.0
LDAP_OPT_X_TLS_CRLFILE string PHP 7.1.0
LDAP_OPT_X_TLS_DHFILE string PHP 7.1.0
LDAP_OPT_X_TLS_KEYFILE string PHP 7.1.0
LDAP_OPT_X_TLS_PROTOCOL_MIN int PHP 7.1.0
LDAP_OPT_X_TLS_RANDOM_FILE string PHP 7.1.0
LDAP_OPT_X_TLS_REQUIRE_CERT int PHP 7.0.5

LDAP_OPT_SERVER_CONTROLS および LDAP_OPT_CLIENT_CONTROLS はコントロールのリストが必要です。 つまり、値がコントロールの配列である必要があるということです。 コントロールは、そのコントロールの ID である oid、オプションの value、オプションのフラグ criticality からなります。PHP において、 コントロールはキーが oid で値が文字列、 二つのオプションの要素からなる配列で指定されます。オプションの要素は、 キーが value で値が文字列、そしてキーが iscritical で値が論理値となります。 iscritical を省略した場合のデフォルトは false です。詳細は » draft-ietf-ldapext-ldap-c-api-xx.txt を参照ください。また以下の二番目の例も参照ください。

value

指定したオプション option の新しい値。

戻り値

成功した場合に true を、失敗した場合に false を返します。

変更履歴

バージョン 説明
8.1.0 引数 ldap は、LDAP\Connection クラスのインスタンスを期待するようになりました。 これより前のバージョンでは、有効な ldap link リソース を期待していました。

例1 プロトコルバージョンの設定

<?php
// $ds はディレクトリサーバーへの LDAP\Connection のインスタンス
if (ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3)) {
echo
"LDAPv3 を使用します";
} else {
echo
"プロトコルバージョンを 3 に設定できませんでした";
}
?>

例2 サーバーコントロールの設定

<?php
// $ds は値を持たないディレクトリサーバーコントロールへの LDAP\Connection のインスタンスです。
$ctrl1 = array("oid" => "1.2.752.58.10.1", "iscritical" => true);
// iscritical のデフォルトは、FALSE です。
$ctrl2 = array("oid" => "1.2.752.58.1.10", "value" => "magic");
// 両方のコントロールを試します
if (!ldap_set_option($ds, LDAP_OPT_SERVER_CONTROLS, array($ctrl1, $ctrl2))) {
echo
"サーバーコントロールの設定に失敗しました。";
}
?>

注意

注意:

この関数は、OpenLDAP 2.x.x または Netscape Directory SDK x.x を使用している場合のみ利用可能です。

参考

add a note

User Contributed Notes 9 notes

up
8
soulbros at yahoo dot com
22 years ago
As john.hallam@compaq.com above mentioned ,one has to set option LDAP_OPT_PROTOCOL_VERSION=3
ldap_set_option($ds,LDAP_OPT_PROTOCOL_VERSION,3);
to use the ldap_rename function.

However, the ldap_set_option() line has to be written immediately after ldap_connect() and before ldap_bind() statements.

Christos Soulios
up
5
hansfn at gmail dot com
17 years ago
Luckily you can turn on debugging before you open a connection:

ldap_set_option(NULL, LDAP_OPT_DEBUG_LEVEL, 7);

This way you at least can see in the logs if the connection fails...
up
2
php at richardneill dot org
1 year ago
If you want to disable the TLS cert check (e.g. because you are doing an SSH port-forward, and ldaps is pointing to localhost), then you must invoke:

ldap_set_option(NULL, LDAP_OPT_X_TLS_REQUIRE_CERT,0)
*before* calling ldap_connect()

If you try:

$ds = ldap_connect(...)
ldap_set_option($ds, LDAP_OPT_X_TLS_REQUIRE_CERT,0)

then the option won't actually take effect, and the certificate will be checked anyway, and a TLS failure will happen..
up
2
technosophos
17 years ago
The following flags are valid integer values for the LDAP_OPT_DEREF (as taken from the documentation for ldap_read()):

LDAP_DEREF_NEVER (int 0) - (default) aliases are never dereferenced.

LDAP_DEREF_SEARCHING (int 1) - aliases should be dereferenced during the search but not when locating the base object of the search.

LDAP_DEREF_FINDING (int 2) - aliases should be dereferenced when locating the base object but not during the search.

LDAP_DEREF_ALWAYS (int 3) - aliases should be dereferenced always.

Example:
<?php
ldap_set_option
($ds, LDAP_OPT_DEREF, LDAP_DEREF_ALWAYS);
?>

These are defined in the draft C API (presumably from the original LDAP API). See draft-ietf-ldapext-ldap-c-api-xx.txt included in the OpenLDAP source code distribution.
up
0
Maarten at Aerobe
4 years ago
PHP 7.1 added support for configuring the LDAP CA/Cert environment directly, rather than relying on the environment variables. I noticed that a lot of people are having trouble getting this to work.

The correct way is:
$ds=ldap_connect("ldap.google.com");
ldap_set_option(NULL, LDAP_OPT_X_TLS_CERTFILE, "/path/file.crt");
ldap_set_option(NULL, LDAP_OPT_X_TLS_KEYFILE, "/path/file.key");
ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3);
ldap_set_option($ds, LDAP_OPT_REFERRALS, 0);
ldap_start_tls($ds);
...
ldap_close($ds);
up
0
badbo_5834 at hotmail dot com
10 years ago
I have the following code, but you do not rename the cn, that may be?

$TheDN = "cn=Nombre,ou=Addressbook,dc=axia-ldap,dc=net";
$newRDN = "cn=bill";
$newParent = "ou=Addressbook,dc=axia-ldap,dc=net";
ldap_set_option($ds,LDAP_OPT_PROTOCOL_VERSION,3);
$result = ldap_rename($ds, $TheDN, $newRDN, $newParent, TRUE);
up
0
john dot hallam at compaq dot com
22 years ago
To get this to work I had to set the LDAP version to 3 using ldap_set_option. Here is an example that might help:

$TheDN = "cn=john smith,ou=users,dc=acme,dc=com";
$newRDN = "cn=bill brown";
$newParent = "ou=users,dc=acme,dc=com";
ldap_set_option($ds,LDAP_OPT_PROTOCOL_VERSION,3);
@$result = ldap_rename($ds, $TheDN, $newRDN, $newParent, TRUE);
up
-2
minusf at gmail dot com
18 years ago
it seems that ldap_set_option returns 1 for bogus ldap_connect -ions also.
ldap_connect always returns a resource (documented in the
comments of ldap_connect) so it is not possible to check if the
ldap server is there or alive or what. and because ldap_set_option
must be between ldap_connect and ldap_bind, there seems to
be no sense in checking the return value.

it is a bit strange that ldap_bind is the first function which can
really check if a ldap resource is usable because it is the third
function in line to use when working with openldap.

<?php
$connect
= ldap_connect("whatever");
$set = ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);
echo
$set;
?>
To Top